TTC Error while reading BLOB
Hi,
I'm trying to SELECT an table with an BLOB-Column 'SELECT * FROM xyz'.
If i set the 'InitialLOBFetchSize = -1' I get the following exception:
Unhandled Exception: System.Exception: TTC Error
at OracleInternal.TTC.TTCExecuteSql.ReceiveExecuteResponse(Accessor[]& defineAccessors, Accessor[] bindAccessors, Boolean bHasReturningParams, SQLMetaData& sqlMetaData, SqlStatementType statementType, Int64 noOfRowsFetchedLastTime, Int32 noOfRowsToFetch, Int32& noOfRowsFetched, Int64& queryId, Int32 longFetchSize, Int32 initialLOBFetchSize, Int64[] scnFromExecution, Boolean& bAllPureInputBinds, DataUnmarshaller& dataUnmarshaller, MarshalBindParameterValueHelper& marshalBindParamsHelper, Boolean bDefineDone, Boolean& bMoreThanOneRowAffectedByDmlWithRetClause)
at OracleInternal.ServiceObjects.OracleDataReaderImpl.FetchMoreRows(Int32 noOfRowsToFetch)
at Oracle.ManagedDataAccess.Client.OracleDataReader.Read()
If i don't change the InitialLOBFetchSize everything works fine, but slow (because of the functionality of 'InitialLOBFetchSize = -1').
I use the ODP.Net managed driver 12.1.0.1.2, with the 12.1.0.1.0 i don't get these exception.
Regards,
Norman Arp
It depends on the database version
On a 11.2.0.2.0 database everything works fine
On a 10.2.0.4.0 database i get the exception
Similar Messages
-
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Error while reading the PO in the Backend system. Inform system admin
Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
TejaI am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna -
EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.
Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server. The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2 .
Source Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4 calling dbdd_dbtab [dbdynpdb 2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026 Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system. In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
PatThe 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$ Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno 15
sid TEH
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make single threaded, ASCII, 64 bit, optimized
profile /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid 75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c 1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15 <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c 12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15 <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 92
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
pid 75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01] 2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c 1758]
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 96
intno 20020600
make single threaded, ASCII, 64 bit, optimized
pid 75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12 -
I created and deployed a BPEL process with a JMS adapter and DB adapter.
I have tested this and it works fine.
After a few days, I try to open the project and the BPEL process, and click on the DB
adapter and it throws an exception on the designer :
"Error while reading wsdl file ... (wsdl file name) NULL Exception"
This is hard to debug as the exception does not provide any info, NULL.
This has happened several times for my project. The next time the JMS adapter hit the
same exception while opening on designer. This one I notice happened after I imported
a new schema file (xsd) into the BPEL process.
Only way around that I have for this currently is to delete and recreate the adapters, which as time
consuming as I have to re-create and re-assign a lot of the activities.
Has anyone encountered this and is there a way to fix this without deleting/recreating the adapters ?
Thanks.I experienced the same issue and found the cause and a workaround;
"Error while reading wsdl file …. Exception: null"
http://www.petervannes.nl/files/b7c08911ce3cde3677e2182bbc5f032a-47.php
Edited by: 944333 on Jul 3, 2012 10:24 PM -
Error while reading PO in backend system Inform system adiministrator
Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj MalhotraHi
Have you tried out this ?
<b>There are two BADIs which might help you in achieving the job.</b>
<u><b>BBP_EXTLOCALPO_BADI</b> [Control Extended Classic Scenario ]
<b>and</b>
<b>BBP_GROUP_LOC_PO</b>
[Exit Grouping of Items for Local Purchase Orders]</u>
<u>Read the documenatation first, using transaction - SE18
before implementing them for your requirement.</u>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Error while reading data through External Table!!!
CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
APLet's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin -
Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12
Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind -
SAP XI 3.0 - Error while reading the ID of own business system from the SLD
Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar -
"Error while reading Exceptions" - Message No. /SCMB/ORDER 351
Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCNHello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard -
Error while reading the PO in the Backend system !
Hi all,
We are working on SRM 5.0(SP12) and Extended classic scenario.
The problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" .
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
In RZ20,i find the log:
The error ocurred by processing event SENT_AGAIN with GUID 490F3C0834351AC6E10000000AE48838 and object_id= 3000000307
The R/3 System Version is 4.6C.
Any help is highly appreciated.Hi,
Thanks for the response.
This problem is hapeening for all PO's in the system.
The no range is smae in both the systems.In SPRO ,howevre we have not maintained the no range in SRM for R/3 system.
Here is the config details:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Range for Local Purchase Orders
EC 3000000000 3999999999 3000000320
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Ranges per Backend System for Follow-on Documents
SAPE02_050 EC RS
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings-->
Define Transaction Types
ECDP PO: Direct Material 03 02
ECPO Purchase Order EC
I have already gone thorugh note Note 1258634 - Certain events cannot be de-activated.
This note is however valid for SRM 6 and 7.
PO is not reaching R/3 system.
No error in sm58/sm12.
The status in BBP_PD for the PO is :
Stats:
Status Description Inact
HEADER I1009 Held X
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1180 Document Completed
Awaiting your inputs. -
Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data
Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PMJust a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James -
Error while migrating BLOB type data
Hi ,
I am migrating the data from oracle to oracle and both soruce and target tables have BLOB type field.
I am getting error when I am executing the interface with these blob fields. But My interface is successfull if I am not maaping this blob files.
Below is the error message.
ODI-1217: Session BLOB (162501) fails with return code 942.
ODI-1226: Step BLOB fails after 1 attempt(s).
ODI-1240: Flow BLOB fails while performing a Loading operation. This flow loads target table IMAGES.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection YAGLD.
Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exist
Thanks,
Patel.Duplicate of
Error while migrating BLOB type data -
Error while reading the ID of own business system from the SLD for system
Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar -
Error while reading file entries from the database
Hi there,
We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
"Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
Any clue? Any suggestion on how we can recover from that?
Thanks a whole lot,
Dom
Server log:
#1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
#1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
#1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
#1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
#1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
#1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
#1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.
Maybe you are looking for
-
I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,. When setting up I chose the French numerique keyboard, although there are two choices French or French numerique. I
-
Issue in copy control F2 to RE for BoM (TAP) item
Hello All, I am facing a issue in return order which is reference to F2. I have maintained all standard copy control, still I am having a issue in TAP item category. The issue is In my sales order I have one standard item ( TAN ) and one BoM item(Mai
-
I'm tryingt to set up my email through my school account and i'm not sure what it means when i'm asked to enter a incoming mail server and an outgoing mail server. Help would be appreciated thanks
-
Why is the icloud icon not in system preferences on my Macbook Pro?
My Macbook does not have the icon for icloud in system preferences. I have the newest softeware and do not know how to set up icloud for m device if it is not listed under system preferences. Any help would be appreciated.
-
Made a purchase of a kids' app but never got the app in my iPad.(payment gone through)
Made a purchase of a kids' app but never got the app in my iPad.(payment gone through)