.ttf font will install but displays improperly

Howdy.
II just downloaded a .ttf which installed all well and good. The problem is I need this font for use in Photoshop, but it displays improperly. The font itself is correct, but looks as though it's bold and over-saturated.
I did some quick troubleshooting and discovered that it works just fine in TextEdit. This problem isn't terribly important as I can just type what I need and then grab > paste it into Photoshop, but for curiosity's sake I'm interested in finding out how the problem can be remedied.
Here is the font in question if you would like to play around with it:
Started By a Mouse - http://www.disneyexperience.com/downloads/fonts/strtdbymous.zip
Thanks
~rr

The problem is I need this font for use in
Photoshop, but it displays improperly.
If the issue is confined to photoshop, you might ask in the forum for that app:
http://www.adobeforums.com/cgi-bin/webx/.ee6b362/

Similar Messages

When I press install button for apps, it says will install but it doesn't. What do I do?

I have downloaded some apps on iTunes and after downloading I try to install them on my iPod Touch 2G 8GB and it says "will install" but it syncs and does not install. How can I overcome this? PLEASE HELP!!!

Are the apps compatible with the iOS version that you have on your iPod ? If they require a higher version than the 4.2 on your tagline then you won't be able to install them

TS1702 i tunes say will install but app not install to my iphone 4s

i tunes say will install but app not install to my iphone 4s

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

I downloaded an app on my MacBookPro(10.9.1) and I can't get it to synch onto my iPhone...any ideas(I click on install...it switches to "will install" but never gets to my iPhone)...thanks in advance

I downloaded an app on my MacBookPro(10.9.1) and I can't get it to synch onto my iPhone...any ideas(I click on install...it switches to "will install" but never gets to my iPhone)...thanks in advance

Your phone connected, iTunes running, under the "Apps" tab, you've selected this app to install on your phone, correct? Hit the "Apply/Sync" button, lower right on the Apps tab, what happens?

ISync will install but will not open.

Hi folks,
This is my first post and boy is it a doozy.
I am having a multitude of issues, of which, my own numbskulledry is the primary cause.
I am a Treo 680 user, and hence, I use Missing Sync.
All of my contacts are in Address Book within OS X and none of which are on my brand new 680 or in Palm Desktops address book.
My Macbook is also new. Now, before I bought the 680 I had a 650, and I had a rather old iBook. I have two phones, a smaller phone for my pocket when I am working, an older Moto . ON my new Macbook, I got all of my contacts off of the Moto via iSync. Now I have my new Macbook, and my new 680, I must admit, that until now, I never tried to use missing sync on the Macbook.
I have been unable to get Missing Sync and iSync to play nice at all on the Macbook.
Everytime I went to enable Palm Synching in iSync, iSync would tell me that something wasnt installed correctly. Someone suggested I trash Missing Sync and reinstall it and try again. Well that only made matters worse.
this is where things get stupid..
So I decided to Trash everything and start over. I trashed every file I could associate with iSync, Missing Sync and Palm Desktop.
So...long story short, when I went to the Apple site to DL iSync, to my surprise I find that the only version available for download, is 1.5. So, I DL'ed it and it installed, but it will not open. It just bounces in the Dock a few times, and then goes away, I've tried this both as a restricted user and logged in as the Admin; same result.
Any helpful thoughts or suggestions would be greatly appreciated.
Thanks very much for reading.

Welcome to Apple Discussions.
As a general rule, you should not attempt to manually remove synchronization components manually. At this point, you are well past that note of caution but, in the future, don't attempt to do so. As you have discovered, that approach does nothing more than aggravate the issues you face.
You must first do this: reinstall the Palm Desktop, using the package bundled on CD-ROM that you received with your smartphone. [It is important that you take these steps in the order I outline. Seriously.]
Next, you should download Pacifist and use that utility to extract and install the iSync 2 package on the original Mac OS X 10.4.x that was supplied with your machine. There is now other way to perform this properly, and you cannot download a copy of iSync 2.x, which is required for use with Mac OS X 10.4 or later. To extract and install iSync, follow these instructions:
If you need to reinstall iSync, you'll need to do it in a two-step process, initially using the Pacifist utility to extract it from your original Mac OS X 10.4.x Install or Upgrade DVD.
Download Pacifist from here.
To extract and install it, launch Pacifist. Insert your Mac OS X 10.4 Install or Upgrade DVD in your optical drive and wait for it to mount. Press the now-activated Open Mac OS X Install Packages button. Wait for the window to appear—it may take some time to load all of the resources—then double click on the Contents of Essentials.pkg file to open it, double-click on the Applications folder, select iSync.app then press the Install button.
That will install a copy of iSync 2 into your Applications folder. Then run the Mac OS X 10.4.9 Combo update for PowerPC or intel processor based machines—whichever is appropriate for your platform—to update it to release 2.4.
Those specific updaters are available at these links:
• for PowerPC: http://www.apple.com/support/downloads/macosx1049comboupdateppc.html
• for intel: http://www.apple.com/support/downloads/macosx1049comboupdateintel.html
Once you have done that, reconfigure iSync to support your smartphone by adding using the Enable Palm OS Syncing… option. You should also reset the synchronization framework by opening the Preferences… dialog and pressing the Reset Sync History… button. Quit iSync.
Launch the Address Book and use the built-in option under the File menu to back up your contact records. Do the same with iCal, using its built-in option to back up your event and task records.
At this point, if you intend to use iSync, initiate a synchronization event and choose Replace to overwrite the contents of your handheld, unless—by doing so—you would lose information on it that is not in iCal or the Address Book. If that is the case, you must instead choose Merge.
Once you have done that, examine all of the records in iCal and the Address Book and make any additions, deletions or modifications you wish to to your contact, event and task data. Back each set up once again.
Then reinstall the Missing Sync, and use the option to overwrite the contents, this one time, of your handheld with the individual Mark/Space Contact, Events and Tasks conduits. Once that has been completed, make any category or group changes to your records on the Palm, and synchronize as you would normally.
If you are stumped at any point or encounter something you do not understand, STOP and ask about it. And whatever you do, don't delete anything related to your synchronization framework except individual application preferences files, should that be necessary.

Is it possible to control what updates a client will install, but have them be downloaded from Microsoft?

We have many smaller sites that are connected to our MPLS network on low bandwidth links such as 2 - 4 Mbps. There is not enough infrastructure there to support a DP site server. Is there a way to tell the client what Windows Updates to install, but
have that client download from Microsoft rather than a DP?
Part of the problem is that the DP for those clients will have the files, so most of the options I see on the specify download settings of this deployment page of the wizard, do not seem to work for me. I see where I can tell the client to use Microsoft
Updates if the updates are not found on distribution point. But they will be found because they will be there for clients that use it with higher bandwidth.
Is branch cache ( or allow clients to share content I guess ) my only option?
Thanks

Ok, keep in mind that this stuff is not tested, not documented, and not supported:
Under "SELECT * FROM SMS_SCI_Component WHERE ComponentName = ' SMS_WSUS_CONFIGURATION_MANAGER ' AND SiteCode = 'CEN'"
Property is:
HostBinariesOnMicrosoftUpdate
Undocumented, untested, but normally untested stuff works well for ConfigMgr! Flag is propbably translated to this WSUS feature:
https://msdn.microsoft.com/en-us/library/microsoft.updateservices.administration.iupdateserverconfiguration.hostbinariesonmicrosoftupdate(v=vs.85).aspx
So try setting it to 1 and have a go?
//Andreas
http://2pintsoftware.com
PS. After talking to Jason it's likely that this will not help you... so dont get your hopes up. :-/

Photoshop Elements 6 will install but not open

I have tried to install Photoshop Elements 6 several times. After what appears to be a successful install, the program will not open. When I go to log off my computer I get a message that Photoshop Elements is still running and my computer is unable to end the program . Under the task manager it shows no applications running but Photoshop Elements shows up in a few places under the Processes tab. This install is directly from the program cd. Any ideas?

First, you may need to install the Adobe licensing-service update:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice
If that doesn't help, try Adobe's generic troubleshooting steps, which include installing with anti-virus disabled and running as administrator:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#Try_Adobes_generic_troub leshooting

CS3 will install, but not run in Windows 7 64bit

I bought a new HP e9220y last weekend. It has an AMD Phenom II Quadcore CPU and 8GB ram running Win7 64bit Home Premium. I installed Illustrator CS3 successfully and all files appear to be in the proper folders and programs are present on the start menu. But when I click on Illustrator or Bridge or anything else it installed, the wait cursor spins for about 10 seconds and then nothing happens. I tried uninstalling and reinstalling several times. I've run the MS cleaner utility. I've tried running in compatablility mode for Vista and Xp. No luck.
I tried downloading and installing Illustrator CS4 and it ran fine. No problems. I have a case open with Adobe tech support with all this but the four people I talked to all had no clue. It's been open and pending their reply for 5 days now. I guess they are stumped.
I read somewhere that someone else with my same processor had the exact same problem, but that was a couple months ago and that forum had no resolution.
Does anyone have a clue where I can start to solve this problem? Obviously, d/l'ing CS4 is a solution, but I was really hoping to avoid the added expense. I am already going to have to get a new scanner because mine doesn't like win7.
Help?

Turns out this is a system specific problem (AMD Quad Core) and a solution was discovered by someone in another forum. He wrote:
"Apparently the licensing software for adobe hated the amd quad cores, but they released a patch which corrects it. I found someone who did this in a random AMD forum and it works great."
http://kb2.adobe.com/cps/401/kb401528.html
I had to turn off my Trend Micro software to get this patch to run, but it worked!

ITunes & QuickTime will install but not open after Windows XP laptop crash

Alright, this may be a repeat question from a long time ago, but I don't have the time to dig through 1,000+ posts so I'll just put it out there. Here's the situation:
*Backed up my entire hard drive including iTunes 8.1 and library to external drive using Roxio Back Up My PC (BUMP) creating a large .QIC file
*Two days later, entire computer crashes - says can't load from BOOT.INI upon start-up
*I re-install Windows XP service pack 2 operating system, install driver update and recovery disc, go through Windows Update and upgrade to service pack 3, etc.
*Do a system recovery from External Drive using same Roxio program, instead of a full restore, it duplicates the files I re-installed and maxes out my C:\ drive.
*Try everything I can to troubleshoot the problems on my own, defragment, disc clean-up, registry cleaner using RegCure, use Windows Installer Cleanup Utility, use File Duplicate Finder to wipe the dupes created by the restore, run Symantec Antivirus 2007 scan just in case, etc...
*Anyways, NOW getting to the iTunes related part: after the system restore, newest upgrade of iTunes 8.1 and Quicktime both don't work at all, they are installed in the same location in Program Files where they originally were housed, but when I click to open, it sends a standard Internet Explorer type error message, prompting either to debug, send troubleshoot message, etc.
*Finally, I un-install iTunes, re-install, same deal. The curious thing: practically all other programs work just fine, incl Windows Media Player, MS Office, all restored and in operational condition. Why the exception with anything Apple related?
Any advice would be MUCH appreciated considering I have 300+ gigs of music. Thank you in advance!!

Try these steps..
http://docs.info.apple.com/article.html?artnum=93976

Itunes will install but I cannot find it

I keep on trying to install itunes on my vista operating system. It says download completed but there is no icon on my desktop or folder in program files. I do a search and still cannot find it....what do I do...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Reader will install but not open in XP

It worked two days ago. Now I get an error message saying it has encountered a problem and needs to close. I have already tried the following.
1) Un-installed all Adobe programs
2) Deleted all Adobe program files
3) Increased virtual memory
4) Re-installed reader
Help!

I have had the same thing happen to me, as well! I have spent so much time on this and it is so frustrating! There are many other forums on the web with other frustrated customers/clients using different versions of Windows / AV and the same problem. I am using Windows 7, downloaded Adobe Reader X. The program installed fine. When I download pdfs from email, and then open them in Adobe X, everything is "a-okay." However, when I save a document from the internet and then download it from windows 7 (same procedure), I get the error message that the file is corrupted or damaged. EVERY SINGLE FILE FROM SEVERAL DIFFERENT STATE OR LEGAL WEBSITES that, also, previously opened fine in prior version of Adobe Reader. I have uninstalled, reinstalled, "repaired," uninstalled again with Norton & Window AV off and installed again ... still no luck. I depend on this Reader EVERYDAY!! I have seen numerous threads with this, BUT no solutions!! Please help!

Workflow Manager 1.0 will install but NOT configure.

Hello everyone,
     I have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine
that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default
settings AND Custom settings.
    When the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect
to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
    I have verified that the USERID is in the correct format and tried multiple different formats. The problem
is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field,
the program force closes. It won't even allow me to put in a password before it force closes.
     Customer domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any ideas?
Thank you very much!
I have copied the errors from event viewer below:
APPLICATION ERROR
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965, time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()

Hi Scott,
Thank you very much.. Now I am able to run wizard.. but at the end of wizard step I am getting below error
[Info] [1/23/2014 5:48:47 PM]: Endpoint=sb://MSPAPPS.psu.edu.sa/WorkflowDefaultNamespace;StsEndpoint=https://MSPAPPS.psu.edu.sa:9355/WorkflowDefaultNamespace;RuntimePort=9354;ManagementPort=9355
[Info] [1/23/2014 5:48:47 PM]: Processing completed
[Verbose] [1/23/2014 5:48:47 PM]: Validating input and configuration parameters.
[Verbose] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
[Progress] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
[Verbose] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
[Progress] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
[Verbose] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
[Progress] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
[Verbose] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
[Progress] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
[Error] [1/23/2014 5:48:55 PM]: System.Management.Automation.CmdletInvocationException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned
message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'.
Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security
token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetWebToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetWebTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetWebToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.HttpWebRequestExtensions.AddAuthorizationHeader(HttpWebRequest request, ITokenProvider tokenProvider, Uri baseAddress, String action)
at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.<GetAsyncSteps>d__11.MoveNext()
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.NamespaceManager.OnEndTopicExists(IAsyncResult result)
at Microsoft.ServiceBus.NamespaceManager.TopicExists(String path)
at Microsoft.Workflow.Deployment.Commands.WorkflowServiceConfigHelper.SetWFRuntimeSettings(String resourceDBConnectionString, String config)
at Microsoft.Workflow.Deployment.Commands.AddWFHost.CallWFRuntimeSettings(Service wfserviceInfo, String unencryptedResourceConnectionString)
--- End of inner exception stack trace ---
at System.Management.Automation.PowerShell.EndInvoke(IAsyncResult asyncResult)
at Microsoft.Workflow.Deployment.ConfigWizard.CommandletHelper.InvokePowershell(Command command, Action`3 updateProgress)
at Microsoft.Workflow.Deployment.ConfigWizard.ProgressPageViewModel.AddWFNode(FarmCreationModel model, Boolean isFirstCommand)

Creative programs will install but will not open with same error message

Hello guys thanks for any help you can provide.
I installed creative cloud and install a few programs. None of the programs will open and I receive the same error message for each one.
Adobe Premiere Pro CC 2014 cannot be opened because of a problem.
Check with the developer to make sure Adobe Premiere Pro CC 2014 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Click Report to see more detailed information and send a report to Apple.
All programs on creative say they are up to date. They have not been registered as I have not successfully opened one yet. I am running a ate 2014 MBP with a 2.8 i7 processor, 16 gb of ram and a 1tb solid state drive with 600gb of space free.
I have uninstalled the programs and have reinstalled with the same result. I have also followed solutions for other problems for programs not starting or loading, with no success. Any help on solving this problem or direction to a previous posted solution would be greatly appreciated.
Thank You

Hey Mylenium,
Thanks for the response. I deleted all the programs, and then removed creative cloud. Then I ran the creative cloud cleaner, and rebooted. I reinstalled and so far everything seems to be working.
Dan

Aperture 1.5 will install but won't run?

I've been trying to install Aperture 1.5 right from an offical Aperture 1.5 disk onto my iMac.
My iMac's only 6 months old so has the latest OSX version 10.5.6.
Installed OK.
Tried to open it to get display: "Cannot use this version of the application Aperture.app with this version of Mac OSX".
So, I went and downloaded the Aperture 1.5.6 update and I get this message: "Aperture 1.0 or later is required to instal this update".
1.5 IS installed it just won't launch. Anyone know what I'm doing wrong?

don't move it from where the installer wants to install it nor rename it as updaters can't see it then
DAVE

.ttf font will install but displays improperly

Similar Messages

Maybe you are looking for