TTYB Error "Link Down"

There was a sudden close in the terminal connection giving link Down error .
After killing and restarting the tip connetion its giving Link Down error
tip -9600 /dev/ttyb
though the server is up (solaris 9.0 , sun fire v440)
link down
Kindly suggest the possible action to be taken for this .

Hi,
You can try Ctrl + c to stop the process or try Stop + a
to get to the Ok prompt.
I encountered the same error when I installed Solaris 2.6
on a Ultra 10.
Regards
Karen

Similar Messages

Reason 7 Link Down errors on wi-fi

Hello,
my wifi disconnects every 30 seconds.
I have these errors in /var/log/system.log:
Link Down on en1. Reason 7 (Frame received from nonassociated STA).
My iPad can connect with the same wifi access point without any issue, so it definitely looks like an issue on OSX.
Other wifi access points work well on my MBP, so it doesn't look like a hardware issue.
All suggestions are welcome!

Can't answer that, but here are some more ideas.
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)

Link down on Oracle 10R2 - RAC

Dear All..
This is my first post, I have question related with RAC environment.
I setting up RAC on spesifications bellow:
- 3 HP server using intel xeon and 4G RAM each.
- Hitachi SAN
- Linux Centos 4.2
- Oracle 10g Release 2
- ASM 2 and OCFS 2
In installation steps, I found no problems. And the IP configuration used are:
# Public Network - (eth0)
172.20.141.1 linux1
172.20.141.2 linux2
172.20.141.3 linux3
# Private Interconnect - (eth1)
192.168.0.1 int-linux1
192.168.0.2 int-linux2
192.168.0.3 int-linux3
# Public Virtual IP (VIP) addresses for - (eth0)
172.20.142.1 vip-linux1
172.20.142.2 vip-linux2
172.20.142.3 vip-linux3
==========================================
Hangcheck 30 seconds, margin is 180 seconds
==========================================
[root@linux2 ~]# grep Hangcheck /var/log/messages |
tail -5
Apr 24 13:09:59 linux2 kernel: Hangcheck: starting
hangcheck timer 0.5.0 (tick is 30 seconds, margin is
180 seconds).
Apr 25 13:24:42 linux2 kernel: Hangcheck: starting
hangcheck timer 0.5.0 (tick is 30 seconds, margin is
180 seconds).
==========================================
setup O2CB_HEARTBEAT_THRESHOLD=301 pada file
/etc/sysconfig/o2cb
==========================================
But when I am trying to test the server using very hard
environment test (transactions and reporting using application
build by Delphi), just likes production ones, I found an error
occurred, eth0 : link down. The times it happen was random
(1 month 3 times - averages values).
And this is the error log.
==========================================
linux2 error log
==========================================
Apr 22 07:55:01 linux2 crond(pam_unix)[4288]: session
closed for user root
Apr 22 07:55:18 linux2 kernel: eth0: link down
Apr 22 07:55:19 linux2 kernel: eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1
Apr 22 07:55:24 linux2 kernel:
(0,0):o2net_idle_timer:1330 connection to node li
nux3 num 1 at 172.20.141.3:7777 has been idle for 10
seconds, shutting it down.
Apr 22 07:55:24 linux2 kernel:
(0,0):o2net_idle_timer:1341 here are some times t
hat might help debug the situation: (tmr
1145667314.798878 now 1145667324.796791
dr 1145667314.798856 adv
1145667314.798892:1145667314.798893 func (c9943f19:505
) 1145429443.839194:1145429443.839197)
Apr 22 07:55:24 linux2 kernel:
(2248,1):o2net_set_nn_state:421 no longer connect
ed to node linux3 at 172.20.141.3:7777
Apr 22 07:55:26 linux2 kernel:
(0,0):o2net_idle_timer:1330 connection to node li
nux1 num 2 at 172.20.141.1:7777 has been idle for 10
seconds, shutting it down.
Apr 22 07:55:26 linux2 kernel:
(0,0):o2net_idle_timer:1341 here are some times t
hat might help debug the situation: (tmr
1145667316.353964 now 1145667326.352424
dr 1145667316.353945 adv
1145667316.353965:1145667316.353966 func (c9943f19:505
) 1145429355.325673:1145429355.325679)
Apr 22 07:55:26 linux2 kernel:
(2248,1):o2net_set_nn_state:421 no longer connect
ed to node linux1 at 172.20.141.1:7777
============================================
linux1 error log
============================================
Apr 22 07:55:02 linux1 crond(pam_unix)[10395]: session
closed for user root
Apr 22 07:57:58 linux1 kernel:
(2319,0):o2net_set_nn_state:421 no longer connect
ed to node linux2 at 172.20.141.2:7777
===========================================
linux3 error log
===========================================
Apr 22 07:55:03 linux3 crond(pam_unix)[14329]: session
closed for user root
Apr 22 07:56:50 linux3 kernel:
(2512,0):o2net_set_nn_state:421 no longer connect
ed to node linux2 at 172.20.141.2:7777
Any body have an advice or solution to overcome this problem.
Thanks for helping.
Best Regards,
Car Elcaro.

$cat opmn/conf/ons.config
localport=6101
remoteport=6200
loglevel=9
useocr=on
2007-02-09 13:43:16.441: [    RACG][1] [15217][1][ora.cgwdb02.ons]: Number of onsconfiguration retrieved, numcfg = 2
onscfg[0]
{node = cgwdb01, port = 6200}
Adding remote host cgwdb01:6200
onscfg[1]
{node = cgwdb02, port = 6200}
Adding remote host cgwdb02:6200
ons is not running ...
2007-02-09 13:43:16.454: [    RACG][1] [15217][1][ora.cgwdb02.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/u01/oracle/product/10.2.0/crs
2007-02-09 13:43:16.454: [    RACG][1] [15217][1][ora.cgwdb02.ons]: clsrcexecut: cmd = /u01/oracle/product/10.2.0/crs/bin/racgeut -e USRORA_DEBUG=0 540 /u01/oracle/product/10.2.0/crs/bin/onsctl ping
2007-02-09 13:43:16.454: [    RACG][1] [15217][1][ora.cgwdb02.ons]: clsrcexecut: rc = 1, time = 0.531s
2007-02-09 13:43:16.454: [    RACG][1] [15217][1][ora.cgwdb02.ons]: end for resource = ora.cgwdb02.ons, action = check, status = 1, time = 0.743s
2007-02-09 13:43:17.421: [    RACG][1] [15239][1][ora.cgwdb02.ons]: onsctl: shutting down ons daemon ...
Number of onsconfiguration retrieved, numcfg = 2
onscfg[0]
{node = cgwdb01, port = 6200}
Adding remote host cgwdb01:6200
onscfg[1]
{node = cgwdb02, port = 6200}
Adding remote host cgwdb02:6200

Hme0: Link Down - cable problem?

i've a problem i've buyed an ultra 10 (used)
i've reinstalled solaris 10 01/06
when it boot the o.s. it give this error message "hme0: Link Down - cable problem?"
and network don't work.
i cannot ping my router but i've gave to my sun an ip of the same netmask (sun ip 192.168.1.88 router ip 192.168.1.1)
i've checked the cable and it's good (it work with a normal pc)
the led on the switch is on (it's green)
maybe i need some patch
how can i do?

gio,
You didn't necesarily do anything wrong.
You do not necessarily have any broken equipment.
There may just be somthing that is incomplete in the setup.
Begin by checking if your network settings were set up correctly by running:
# ifconfig -a
(it's usually best to troubleshoot while you are root user)
If the output from the ifconfig command seem to be complete, you could always think about reconfiguring the NIC all over again.
If you are not sure, then just paste the entire output results back here.
Also, use the forum search function, using keyword sys-unconfig.
Next, read the Solaris man pages for sys-unconfig.
That command will force you to repeat the setup of the connection.

PPP Link down

Anybody know what "PPP link down" means ?
Just recently my HHub has been dropping adsl for about 5 mins 3 or 4 times a day and reporting PPP link down when it drops and PPP Link up when it comes back on.
From this morning -
10:47:50  11 Jan
PPP link up (Internet) [xxx.xxx.xx.xxx]
10:47:50  11 Jan
PPP CHAP Chap receive success : authentication ok
10:47:40  11 Jan
PPP CHAP Receive challenge (rhost = bras-red7.sl)
10:42:40  11 Jan
PPP link down (Internet) [xx.xxx.xx.xx]
ADSL line status
Line state
Connected
Connection time
0 days, 14:20:15
Downstream
5,971 Kbps
Upstream
910 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
7.1 dB / 4.7 dB
Line attenuation (Down/Up)
42.0 dB / 22.9 dB
Output power (Down/Up)
20.7 dBm / 12.4 dBm
Loss of Framing (Local)
45
Loss of Signal (Local)
4
Loss of Power (Local)
0
FEC Errors (Down/Up)
732479 / 469
CRC Errors (Down/Up)
39 / 2147480000
HEC Errors (Down/Up)
nil / 343434
Error Seconds (Local)
284
1. Best Effort Test: -provides background information.
Download Speed
4265 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 4265 Kbps
For your connection, the acceptable range of speedsis 2000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :5968 Kbps(DOWN-STREAM), 908 Kbps(UP-STREAM)
IP Profile for your line is - 5000 Kbps
2. Upstream Test: -provides background information.
Upload Speed
712 Kbps
0 Kbps
908 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 712 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 908 Kbps
Ta,
Del.

Hi djh22
This link may help http://en.wikipedia.org/wiki/Point-to-Point_Protocol
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Ethernet/networking link down // AppleYukon2 - en0 link down

*Massive writing into a Volume located on a NAS // Ethernet/networking link down // AppleYukon2 - en0 link down*
Scenario
Writing a massive data into a volume (sparsebundle) on a NAS (network attached store).
*Problem / Error*
Always during this process the Ethernet link down.
Then the MAC OS X (10.5.6) freeze – no reset, no shutdown and no volume eject – after trying some clicks the spinning wheel comes and only soft reset or hard reset shutdown.
*Technical Info*
Wireless Device: Linksys - WRT54G firmware updated
NAS/External Hard Drive: Iomega - Home Network HD firmware updated
MacBook Pro // Mac OS X (10.5.6) // 2.2 GHz Intel Core 2 Duo // 2 GB
Logs
+LOG 1+
Apr 8 18:56:30 wslyMac /System/Library/CoreServices/backupd[207]: Backup requested by user
Apr 8 18:56:30 wslyMac /System/Library/CoreServices/backupd[207]: Starting standard backup
Apr 8 18:56:36 wslyMac /System/Library/CoreServices/backupd[207]: Mounted network destination using URL: smb://admin@STORAGE-7AB4/TimeMachine
Apr 8 18:56:36 wslyMac /System/Library/CoreServices/backupd[207]: Backup destination mounted at path: /Volumes/TimeMachine-1
Apr 8 18:56:58 wslyMac kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 18:57:07 wslyMac hdiejectd[231]: running
Apr 8 18:57:08 wslyMac kernel[0]: jnl: disk1s2: replay_journal: from: 8088064 to: 15072256 (joffset 0x7d0000)
Apr 8 18:57:25 wslyMac kernel[0]: jnl: disk1s2: journal replay done.
Apr 8 18:57:25 wslyMac fseventsd[37]: event logs in /Volumes/TimeMachine_Backup/.fseventsd out of sync with volume. destroying old logs. (1989 18 2969)
Apr 8 18:57:25 wslyMac /System/Library/CoreServices/backupd[207]: Disk image /Volumes/TimeMachine-1/wslyMac_001b63b30d6b.sparsebundle mounted at: /Volumes/TimeMachine_Backup
Apr 8 18:57:25 wslyMac /System/Library/CoreServices/backupd[207]: Backing up to: /Volumes/TimeMachine_Backup/Backups.backupdb
Apr 8 18:57:29 wslyMac fseventsd[37]: log dir: /Volumes/TimeMachine_Backup/.fseventsd getting new uuid: CBE196F1-1008-4BFB-8D4A-AD9504E68ACF
Apr 8 18:57:59 wslyMac /System/Library/CoreServices/backupd[207]: Event store UUIDs don't match for volume: Macintosh HD
Apr 8 18:58:00 wslyMac /System/Library/CoreServices/backupd[207]: No pre-backup thinning needed: 29.79 GB requested (including padding), 245.17 GB available
Apr 8 19:20:31 wslyMac kernel[0]: AppleYukon2: 00000000,00000017 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:21:35 wslyMac kernel[0]: AppleYukon2: 00000000,0000001b sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:21:53 wslyMac kernel[0]: AppleYukon2: 00000000,0000001e sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:32 wslyMac kernel[0]: AppleYukon2: 00000000,00000004 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:37 wslyMac kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:41 wslyMac kernel[0]: AppleYukon2: 00000000,00000011 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:25:32 wslyMac kernel[0]: smbiodsendall: Timed out waiting on the response for 0x32
Apr 8 19:25:38 wslyMac kernel[0]: AppleYukon2: 00000000,000003e8 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket timedout
Apr 8 19:32:07 localhost kernel[0]: npvhash=4095
+LOG 2+
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Backup requested by user
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Starting standard backup
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Mounted network destination using URL: smb://admin@STORAGE-7AB4/TimeMachine
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Backup destination mounted at path: /Volumes/TimeMachine-1
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Disk image /Volumes/TimeMachine-1/wslyMac_001b63b30d6b.sparsebundle mounted at: /Volumes/TimeMachine_Backup
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Backing up to: /Volumes/TimeMachine_Backup/Backups.backupdb
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Ownership is disabled on the backup destination volume. Enabling.
Apr 8 22:03:26 wslyMac KernelEventAgent[35]: tid 00000000 received unknown event (256)
Apr 8 22:03:27 wslyMac /System/Library/CoreServices/backupd[356]: Event store UUIDs don't match for volume: Macintosh HD
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: Backup content size: 66.6 GB excluded items size: 44.6 GB for volume Macintosh HD
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: No pre-backup thinning needed: 26.46 GB requested (including padding), 249.57 GB available
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: Waiting for index to be ready (909 > 0)
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,0000009c sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,00000008 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,00000004 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:41:20 wslyMac kernel[0]: smbiodreconnect: Reconnected to STORAGE-7AB4
Apr 8 22:41:49: --- last message repeated 1 time ---
Apr 8 22:41:49 wslyMac kernel[0]: disk1s2: 0x48 (UNDEFINED).
Apr 8 22:41:50 wslyMac kernel[0]:
Apr 8 22:41:50: --- last message repeated 1 time ---
Apr 8 22:41:50 wslyMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Apr 8 22:41:50 wslyMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 463360 bytes to the journal!
Apr 8 22:41:50 wslyMac kernel[0]: smbiodreconnect: Reconnected to STORAGE-7AB4
Apr 8 22:41:50 wslyMac fseventsd[39]: disk logger: failed to open output file /Volumes/TimeMachine_Backup/.fseventsd/00000000005a57d8 (Invalid argument). mount point /Volumes/TimeMachine_Backup/.fseventsd
Apr 8 22:41:50 wslyMac kernel[0]: smbfssmb_reopenfile: Reopen 1a with open deny modes failed because the modify time has changed was 1239244850s 0ns now 1239244910s 0ns!
Apr 8 22:41:50 wslyMac kernel[0]: smbfssmb_reopenfile: Warning: pid 360(diskimages-helpe) reopening of 1a failed with error 5
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in ci_ftruncate:ftruncate(53 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1/live.0.indexPostings, 131072) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexGeneral in notify_lowspace:low space for device 234881029 (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)
Apr 8 22:41:50 wslyMac mds[33]: (Error) Volume: LOW DISK SPACE device:234881029
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in ci_ftruncate:ftruncate(54 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1/live.0.indexPostings, 131072) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ci_ftruncate:ftruncate(48 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.indexPostings, 4096) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app/Contents/version.plist to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app/Contents
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app/Contents to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Indexing a file failed. Returned -1132 for: /Applications/Utilities/System Profiler.app, /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Aborting backup because indexing of file failed.
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Stopping backup.
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Copied 1738 files (4.0 GB) from volume Macintosh HD.
Apr 8 22:41:55 wslyMac /System/Library/CoreServices/backupd[356]: Backup canceled.
Apr 8 22:41:56 wslyMac /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[117]: StatusMonitor::volumesChangedCallBack returned -47
Apr 8 22:42:06: --- last message repeated 1 time ---
Apr 8 22:42:06 wslyMac /System/Library/CoreServices/backupd[356]: Failed to eject volume /Volumes/TimeMachine_Backup (FSVolumeRefNum: -113; status: -47; dissenting pid: 0)
Apr 8 22:42:06 wslyMac /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[117]: StatusMonitor::volumesChangedCallBack returned -47
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ci_ftruncate:ftruncate(43 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.indexIds, 32768) error:22
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in openindexfile:ftruncate error: 22, size: 32768, live.0.indexIds
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ContentIndexOpenBulk:Could not open /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.; needs recovery
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1
Apr 8 22:50:21 localhost kernel[0]: npvhash=4095
Apr 8 22:50:17 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Apr 8 22:50:17 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Apr 8 22:50:21 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Apr 8 22:50:21 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Apr 8 22:50:21 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Apr 8 22:50:21 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Apr 8 22:50:21 localhost DirectoryService[11]: Launched version 5.6 (v514.24)
Apr 8 22:50:27 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 8 22:50:22 localhost DirectoryService[11]: Improper shutdown detected
Apr 8 22:50:27 localhost kernel[0]: PAE enabled
Apr 8 22:50:27 localhost kernel[0]: 64 bit mode enabled
Apr 8 22:50:27 localhost kernel[0]: Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
Apr 8 22:50:27 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 8 22:50:27 localhost kernel[0]: vmpagebootstrap: 511374 free pages and 12914 wired pages
Apr 8 22:50:27 localhost kernel[0]: migtable_maxdispl = 79
Apr 8 22:50:22 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Apr 8 22:50:27 localhost kernel[0]: 101 prelinked modules
Apr 8 22:50:27 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Apr 8 22:50:27 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Apr 8 22:50:27 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Apr 8 22:50:27 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Apr 8 22:50:27 localhost kernel[0]: calling mpopolicyinit for mb
Apr 8 22:50:27 localhost kernel[0]: Seatbelt MACF policy initialized
Apr 8 22:50:27 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Apr 8 22:50:27 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 8 22:50:27 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 8 22:50:27 localhost kernel[0]: MAC Framework successfully initialized
Apr 8 22:50:27 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Apr 8 22:50:27 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Apr 8 22:50:27 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Apr 8 22:50:27 localhost kernel[0]: mbinit: done
Apr 8 22:50:27 localhost kernel[0]: Security auditing service present
Apr 8 22:50:27 localhost kernel[0]: BSM auditing present
Apr 8 22:50:27 localhost kernel[0]: rooting via boot-uuid from /chosen: 402D8D77-0836-3192-8A63-554D726141DC
Apr 8 22:50:27 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 8 22:50:27 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 001e52fffe3817fa; max speed s800.
Apr 8 22:50:27 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHY2120BH Media/IOGUIDPartitionScheme/Customer@2
Apr 8 22:50:27 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Apr 8 22:50:27 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 15129600 to: 2979328 (joffset 0x7d01000)
Apr 8 22:50:27 localhost kernel[0]: [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
Apr 8 22:50:27 localhost kernel[0]: [Bluetooth::CSRHIDTransition] transition complete.
Apr 8 22:50:27 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Apr 8 22:50:27 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Apr 8 22:50:27 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Apr 8 22:50:27 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories
Apr 8 22:50:27 localhost kernel[0]: Jettisoning kernel linker.
Apr 8 22:50:27 localhost kernel[0]: Resetting IOCatalogue.
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 1
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 2
Apr 8 22:50:27: --- last message repeated 4 times ---
Apr 8 22:50:27 localhost kernel[0]: Previous Shutdown Cause: 5
Apr 8 22:50:27 localhost kernel[0]: NVDANV50HAL loaded and registered.
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27 localhost kernel[0]: ath_attach: devid 0x24
Apr 8 22:50:27 localhost kernel[0]: Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
Apr 8 22:50:27 localhost kernel[0]: mac 12.10 phy 8.1 radio 12.0
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27: --- last message repeated 1 time ---
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 0
Apr 8 22:50:27 localhost kernel[0]: yukon: Ethernet address 00:1b:63:b3:0d:6b
Apr 8 22:50:27 localhost kernel[0]: AirPort_Athr5424ab: Ethernet address 00:1e:52:71:2c:52
Apr 8 22:50:30 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[16]: starting
Apr 8 22:50:30 localhost fseventsd[38]: event logs in /.fseventsd out of sync with volume. destroying old logs. (3603 22 3778)
Apr 8 22:50:30 localhost rpc.statd[30]: statd.notify - no notifications needed
Apr 8 22:50:31 localhost kernel[0]: AirPort: Link Down on en1
Apr 8 22:50:30 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33]: Login Window Application Started -- Threaded auth
Apr 8 22:50:30 localhost fseventsd[38]: log dir: /.fseventsd getting new uuid: B621E1D8-11D5-49D5-90F5-6E32BEDC8615
Apr 8 22:50:30 localhost bootlog[45]: BOOT_TIME: 1239241808 0
Apr 8 22:50:30 localhost blued[46]: Apple Bluetooth daemon started.
Apr 8 22:50:31 wslyMac configd[14]: setting hostname to "wslyMac.local"
Apr 8 22:50:33 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Apr 8 22:50:35 wslyMac org.ntp.ntpd[26]: Error : nodename nor servname provided, or not known
Apr 8 22:50:35 wslyMac ntpdate[60]: can't find host time.apple.com
Apr 8 22:50:35 wslyMac ntpdate[60]: no servers can be used, exiting
Apr 8 22:50:39 wslyMac kernel[0]: IOHIDSystem: Seize of IOHIDPointing failed.
Apr 8 22:50:39 wslyMac kernel[0]: IOHIDSystem: Seize of IOHIDEventDriver failed.
Apr 8 22:50:39 wslyMac kextd[10]: writing kernel link data to /var/run/mach.sym
Apr 8 22:50:43 wslyMac /usr/sbin/ocspd[75]: starting
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: Starting HP IO Monitor
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: Starting HP Trap Monitor
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
Apr 8 22:50:46 wslyMac loginwindow[33]: Login Window Started Security Agent
Apr 8 22:52:36 wslyMac authorizationhost[95]: MechanismInvoke 0x125de0 retainCount 2
Apr 8 22:52:36 wslyMac SecurityAgent[96]: MechanismInvoke 0x101660 retainCount 1
Apr 8 22:52:37 wslyMac SecurityAgent[96]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Apr 8 22:52:37 wslyMac loginwindow[33]: Login Window - Returned from Security Agent
Apr 8 22:52:37 wslyMac SecurityAgent[96]: MechanismDestroy 0x101660 retainCount 1
Apr 8 22:52:37 wslyMac authorizationhost[95]: MechanismDestroy 0x125de0 retainCount 2
Apr 8 22:52:37 wslyMac loginwindow[33]: USER_PROCESS: 33 console
Apr 8 22:52:37 wslyMac com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[91]): Exited: Terminated
Apr 8 22:52:37 wslyMac com.apple.launchd[108] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Apr 8 22:52:42 wslyMac Dock[118]: _DESCRegisterDockExtraClient failed 268435459
Apr 8 22:52:44 wslyMac /System/Library/CoreServices/coreservicesd[56]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(wsly Hiroyuki Mompean Ueda's Public Folder) returned -14135
Apr 8 22:53:02 wslyMac /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 24]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Apr 8 22:53:02 wslyMac /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 24]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Apr 8 22:54:42 wslyMac kernel[0]: AppleYukon2 - en0 link down
Apr 8 22:54:46 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Apr 8 22:54:52 wslyMac kernel[0]: AppleYukon2 - en0 link down
Apr 8 22:54:53 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0

I've had this problem with this computer as soon as I remember starting to use it.
You should have taken it back to apple immediately.
You need to try a clean install of the OS.. yosemite has known bugs especially with the wireless and if you upgrade installed the OS it can just get worse.
You should do a clone of the hard disk and a Time Machine backup etc.. to make sure you don't lose files.. but a clean install will at least show if it is driver issue or actual faulty hardware. Is the laptop still in warranty / Applecare.. if so return it to apple for checking.

Airport trouble - Link down on en 1

I get some trouble with my airport connection - some lose of network a few second as my Aiport Express seems not valid.
This is a sample of log but i can't really see what i must do ?
This is a new mac and i have restarted my Airport Express to created a new Network.
The problem occurs each 5 or 10 minutes.
Help is welcome !
Sep 29 23:52:19 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:26:08:e9:51:83
Sep 29 23:52:20 localhost kernel[0]: AirPort: Link Down on en1
Sep 29 23:53:39 MBP17 com.apple.launchd[259] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Sep 29 23:53:47 MBP17 [0x0-0x14014].com.apple.airport.helper[294]: Apple80211Agent[294]: [FC] Operation took 34045ns
Sep 29 23:54:15 MBP17 com.apple.launchd[259] ([0x0-0x2b02b].com.apple.AirPortBaseStationAgent[326]): Exited with exit code: 1
Sep 29 23:54:21 MBP17 kernel[0]: AirPort: Link Up on en1
Sep 29 23:54:57 MBP17 /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport[385]: Error: Scan failed (16)
Sep 29 23:54:57 MBP17 /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport[385]:

Hi
you don't say what wireless router it is... if an att model, then this may help
http://utalk.att.com/t5/High-Speed-Internet-Access/Suddenly-laptop-will-not-conn ect-wirelessly/td-p/211083/page/2
if not att, look for something similar in the router setup pages.

Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

Issue: I am encountering a problem entering Taxes when applying down payments received from customers since we are using a jurisdiction code taxation procedure. This process works as desired in Europe for our firm. I found OSS 97288 which is not valid for version ECC 6.0. Please assist due to US go-live in 2 weeks.Process: Create Down Payment Request for cash in advance. Required to tax at this point. Billing document creates a noted item in the G/L (Special G/L). I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
Settings: 1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross." 2) Transaction OBXB specifies tax clearing account for transaction key MVA. This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
Thank you in advance!

Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

Internal error: Link from Integration Process

Hello,
i´ve got a big problem with a process in PI 7.1
When I try to save my process I get this Error Message:
Internal error: Link from Integration Process IP_ASSET_EXCHANGE | http://hiddennamespace.com to object type "ifmextmes" with role "d77b01873ae811de8f28000c294f2f80" is not permitted
For my Abstract interfaces I use External Definitions.
Does anyone has a tip?
Thnx,
Rgds,
Steffen

Hi!
I have same problem.
Have you decided this issue?
Thnx,
Serg

Occasional problem with eth0 link down after booting

Hi,
Every so often after booting up the PC there is not any working network connection. Looking through the output of dmesg, I find "eth0 link down" messages. Not knowing a lot about networking lead me to resort to rebooting to resolve the problem, and rebooting does indeed resolve the problem. Today I discovered the post at [url http://bbs.archlinux.org/viewtopic.php?id=117728] which suggests similar behaviour.
I played around with ifconfig and initially thought I was seeing the same behaviour, but believe I was mistaken. I can't actually confirm until it happens if my new found knowledge will actually resolve the problem without rebooting.
I'd like to try and track down the source of the problem, and either file a bug report or take some other (configuration) measure, but need help tracing it.
Hardware in question is: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
and I'm using the testing repository in Arch. Any help appreciated.
Cheers,
James.

I have the exact same problem and I have the exact same ethernet controller/chip.
I've not looked that much why it was doing this. Maybe auto-negotiation fail for I don't know which reason, maybe something else, hard to tell. I might try to investigate this a bit more next time it does me this.
That said, what I'm doing when I'm seeing that my eth0 has no carrier, I'm doing a "ip link set eth0 down", wait a few seconds, and then a "ip link set eth0 up", and then it's usually fine. Since I'm personally using static IP addresses, I also have to re-add the default route after that, i.e. a "ip route add default via 192.168.1.1" to be able to go out of my LAN again. This will be different if you are using DHCP.

Receive "Fatal Internal Error: Linker.cpp, line 1926 when run executable.

Hi, I use invoke node to call multiple subvi.vit, it work fine under .vi but when run under an executable I receive this error:
Fatal Internal Error: 'linker.cpp", line 1926
LabVIEW Version 7.0 You will lose any unsaved work. For more assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
Any suggestion will be very appreciated

Hi David,
What you are seeing is a known issue when calling LabVIEW 7.0 VITs from
an executable or DLL if the VITs include any Express VIs. It can happen if you
try to load
multiple instances of that template VI using VI Server.
There are a couple of workarounds for this issue:
Take
all the express VIs that are inside the template VI and turn them into
static subVIs. You can do this by right-clicking on the express VI and
selecting "Open Front Panel"; then save the express VI as a normal
subVI.
Build the entire application into a single executable, which will force all of the express VIs to get compiled as static subVIs.
Don't use the runtime engine at all and always run your application in development mode.
Let me know if the workarounds fix your issue, thanks.
Good luck!
- Philip Courtois, Thinkbot Solutions

Srw224g4 fiber link down

Support,
Yesterday for no apparent reason the fiber link between my SRW224G4 and SLM248G went down. Luckily I have a backup SRW224 switch with a mini-GBIC. I tried both ports on the SRW224G4 switch. Neither would sync with the SLM248G switch. I moved the mini-GBIC to the SRW224 switch. This got the network back up.
Why did not SRW224G4 switch fail? I've looked through the logs and only see link down entries. Is there a way to test the switch to see why it failed? Do I need to relpace the switch? Is it still under warranty? What are my options??
Thanks,
Bill V

i've checked the datasheet for the device and the warranty period is 5 years. you already tried to use a different mini-gbic card for the device, right? i suggest that you try to swap the gbic card also to verify if that will work.

Solaris 8 says: "Link down, Cable Problem?"

I have these on my home LAN:
1. Sun Ultra 5 Solaris 8
2. Win 2000 PC
3. Win NT laptop
They are all hooked into a LinkSys Router.
The Router is hooked into my Motorala Cable Modem.
Here's the problem:
The PC and the laptop can see each other on the LAN.
The Solaris 8 is only visible on the Lan INTERMITTENTLY.
The lights on the Router for the PC and laptop are always ON.
When I reboot the Solaris box, the lights on the Router sometimes come ON, and sometimes they stay OFF. When they stay OFF, I see the message: "Link down, Cable Problem?" during reboot.
I have tried different cables, and tried various combinations of the 4 avalable ports on the back of my Router.
If I plug in the Sun box DIRECTLY into my cable modem, then I don't see the above message. (but then I don't have a LAN anymore)
Please help, I've been struggling with this for a while now.
Thanks,
Irshad Ahmed (I am relatively new to Sun)

Hi
You have not indicated if you have the router ethernet ports working
at 100Mbps or 10Mbps. Depending on this sometimes, Sun systems may
not be correctly auto-negotiating their ethernet port settings.
You may set these parameters to force Sun Ultra 5 to a 100Mbps mode or a 10Mbps mode.
For forcing it to 100Mbps, Full Duplex mode and disabling the auto-negotiation, put these entries in /etc/system:
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=1
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=0
set hme:hme_adv_10hdx_cap=0
Conversely, if you want to force your Sun to work on 10Mbps, Full
duplex mode, (if your router does not support 100Mbps) in the same
/etc/system file, put the following entries :
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=1
set hme:hme_adv_10hdx_cap=0
One of these should solve your problem. You need to reboot the system
after putting these entries.
You can also check the port at the OK prompt using the command
"watch-net". This test the onboard ethernet interface.
You may also apply the hme patch released by Sun that fixes many
known problems with hme ethernet driver. The patch id is 108981-03.
It is available from the site :
http://sunsolve.sun.com
HTH
Shridhar
Sun-DTS

Link down and Link Up Snmp trap C#

Hi i've configure my cisco router to receive the SNMP traps if the link goes up or down. However i found out that when i plugged out the cable i'm not receiving any link down on the network management system. Until i plugged in again the link will then show up or down state. May i know whats the reason why i can't receive the link down when i plugged out my cable?

If your router has only fa0/0 as active interface, then this would be the interface that the router would use to communicate with the network management system. However when you unplug that interface now the router has no interface that it can use to send the link down trap to the network management system.
HTH
Rick

Fibre Link Down

We have been using an Apple RAID with 8 disk (4 in each controller side) for almost 6 months, each controller in the raid is conected to a Qlogic 5600 and from there to 3 IBM servers using slicing and LUN mapping.
Suddenly since two weeks ago we have been receiving this logs AT IRREGULAR intervals:
Upper Controller 04/01/08 08:51:09 PM RAID Controller 1 Fibre Link Up
Warning Upper Controller 04/01/08 08:51:08 PM RAID Controller 1 Fibre LIP
Warning Upper Controller 04/01/08 08:48:48 PM RAID Controller 1 Fibre Link Down
And the windows server report that the SCSI disk have been disconnected, when we stop all the servers and reboot the raidfabricsservers works for 2 to 5 days and again the same messages.
Any idea of what is happenning and how to handle this ?
Humberto

+ the ports on the fibre switch should be configured right for storage/hosts:
RSCN suppression on / device scan off for hosts
and vice versa for storage
+ the logs from the FC are hidden, you can access them following the next procedure. (As explained in the [qlogic event manual|http://www.servants.co.jp/qlogic/pdf/2-259060-00_A-QLogicFCSwitchEventMassageGuideFW40.pdf]
Archiving and Downloading the Event Log
You can use the command line interface to create a file on the switch that contains
the most recent 200 entries plus the previous 1000 entries. This file can then be
downloaded to the workstation using FTP. To create and download a log file, do
the following:
1. Log into the switch through Telnet and create an archive of the event log.
The Set Log Archive command creates a file on the switch named logfile.
QLogic #> admin start
QLogic (admin) #> set log archive
2. Open an FTP session on the switch and login with the account name images
and password images. Transfer the file logfile in binary mode with the Get
command.
ftp ip_address
user:images
password: images
ftp>bin
ftp>get logfile
xxxxx bytes sent in xx secs.
ftp>quit

TTYB Error "Link Down"

Similar Messages

Maybe you are looking for