Tumbnails and home page not holding

for the last few days, whenever i open firefox, it does not open to my home page (i have re-set multi times) and all of my thumbnails are wrong. additionally, it will not hold a zoom out at the level i use to see my thumbnails
finally, some of the websites i visit on firefox look wrong - either size or info
thanks

You may have zoomed the page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.

Similar Messages

  • TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

    I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

    Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

  • Firefox is not preserving When starts and Home Page in 8.1

    Tools -> Options -> General -> When Firefox starts ---and--- Home Page
    This information is not staying permanently in Firefox 29.0.1 with Windows 8.1.

    Please try these steps: [[How to fix preferences that won't save]]
    Please post back with the results, it can help other users!

  • Comcast took over my firefox browser and home page, how do I get comcast out of my firefox

    I moved to a new area and comcast installed the service here. The installation and set up of the modem asked me to install a toolbar and I opted out because I see no use in comcast services. Comcast installed some thing like malware that took over safari chrome and firefox where all of the home pages were converted to their site. Safari required being reset and chrome I removed and reinstalled. Firefox has been completely taken over, I have uninstalled it 3 times and tried safe mode and just about everything else. I spent 2 hours on the phone with comcast to no avail and my feeling on it is that firefox is the most popular browser and comcast wants part of that so they have developed their own little malware to get in on firefox. What can I do as customer or user of firefox to get rid of comcast and their browser and home page and get back to what I am comfortable with which is firefox and my npr home page.

    Sorry, if resetting your homepage in Firefox doesn't work or that change is only temporary until the next time you use your PC or restart it, you need to uninstall that Comcast Toolbar from your PC. I don't know how or where that Comcast Toolbar for Firefox is installed, so you'll need to figure that out yourself.
    The first place to look is the Windows Control Panel > Add / Remove Programs, and it is there '''Remove''' it.
    Second place is in the Firefox Add-ons Manager tab - '''{ Ctrl + Shft + A }''' - if you find it there, '''Uninstall''' it from Firefox.
    If you are able to get rid of that Comcast Toolbar and still have problems with not being able to set your choice for a homepage, let us know. There are a couple of places that may have been messed with by that application, like a user.js file or the prefs.js file.
    I'm a Comcast user, too, although I have had this cable service for over 10 years now, with the two previous owners of the franchise for this area before Comcast bought out AT&T Cable. All three companies recommended that I have their "software" installed and I refused it each time. I told them if it was "required", they could close my account, that I would go elsewhere.

  • HT4550 Why does my Safari open with American version and home page with Apple iPhone 5 advert even though I have changed them in preference

    Why does my Safari open with American version, and home page with Apple iPhone 5 advert even though I have changed them in preferences, it happens every time no matter how many times I change them, when I open Safari its back to the USA and Apple home page.

    Try this.
    Hold the shift key down and launch Safari.
    Best.

  • With version 5, on starting get a box "checking compatibility of add-ons" then to Firefox home page not my home page--What's happening?

    Just installed version 5. As above I get the box then it goes to Firefox home page not my home page. I've updated and/or disabled every add-on or extension and it made no difference. I am in a university behind a tough firewall. I'd love to go back to version 4 but that isn't available.

    Disabled add-ons will still be checked and can still be updated.
    I don't know why you are continuously getting the message, you should only get it when there is a version change.
    You can try solutions in https://support.mozilla.com/questions/817681 but you had better make a list of what extensions you had disabled first, because all of your extensions will be enabled when you delete/rename those files in your profile. You can use about:support to get a list of your extensions. (renaming is safer than deleting).

  • I just did an update to 6.0 on Lion. Now when I re-open Safari after closing it by clicking the red button  it re-opens to my home page, not all my previous tabs..  prior to the update it would re-open with all my previous tabs, which is what I want.

    I just did an update to Lion  10.7.4 with Safari  6.0. Now when I re-open Safari after closing it by clicking the red button,  it re-opens to just my home page, not to all my previous tabs as it did before the update.  I prefer having my old tabs re-open.  How can I fix this?

    I've had what I think is the same problem since the most recent software update.  I have Lion 10.7.4 and have updated to Safari 6.0.  The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions.  I don't like that as well, but I can live with it.  However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out.  So I usually can't get back to previous pages using the back button.  Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close.  The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything.  I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info.  Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem.  I've filed a bug report; I surely hope the Apple engineers are able to fix this.  I'm used to using the back button function a lot!

  • Home page not loading in some machines

    I develop one site & released to the server but some
    machine home page not loading.
    We can see the message done only.
    Is it possible to load the page without the Flash
    Player.

    "Shums Lafir" <[email protected]> wrote in
    message
    news:gp2brj$j56$[email protected]..
    >I develop one site & released to the server but some
    machine home page not
    >loading.
    > We can see the message done only.
    > Is it possible to load the page without the Flash
    Player.
    You can include alternative content for people who do not
    have the Flash
    player. Essentially, you write the site twice--once in HTML
    and once in
    Flash/Flex. This is one reason why people will often advise
    you not to put
    mission-critical functionality into anything that requires
    the Flash player,
    unless you're 100% certain that all of the users who need to
    see your
    content will have it.

  • Each time I open my Firefox browser, the tab from the last time opens. I have the browser set to open on my home page, not to the tab from the last time. I keep trying to save the setting for the browser to open on my home page but it doesn't.

    Each time I open my Firefox browser, the tab from the last time opens. I have the browser set to open on my home page, not to the tab from the last time. I keep trying to save the setting for the browser to open on my home page but it doesn't.

    Try to create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • SharePoint 2013 site coll's created. Home page not displaying for any site collection in farm

    SharePoint 2013 site coll's created. Home page not displaying. Same issue for all site coll's in the farm. Done the basic checks. Any Ideas?

    Hi lakshita,
    Would you please check whether you can go to the page:
    http://siteurl/_layouts/settings.aspx page:
    http://siteurl/default.aspx page? If so, go to Site Features in site settings page, reactivate the Wiki Page home page feature, check the result.
    If not, please check whether there is related information in ULS log and event viewer log file? Does the page shows page not found or other errors? Check whether the site can be opened in other machine?
    Thanks,
    Qiao Wei
    TechNet Community Support

  • Why are only the headers shown on my google home page,not the stories ?

    Hello, I am running Firefox 6,and now only the headers are
    shown on my Google home page,not the content. Thanks

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • When Firefox opens it goes to the FF home page not my home page, home button does go to my home page

    I just switched to Firefox 5 now when I open Firefox it opens the Firefox home page not the Road runner home page I use. If I hit home page on the task bar it does go to Road Runner. What do I need to change so opening Firefox opens my home page?

    You can start by checking the Home page setting to see if that still links to the Google Home page (http://www.google.com/firefox)
    * Tools > Options > General > Startup: Home page
    You can also check the startup setting just above the home page setting.
    If the home page setting isn't correct and changing it doesn't last if you close and reopen Firefox then you need to check if the file [http://kb.mozillazine.org/prefs.js_file prefs.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] isn't corrupted.
    * Help > Troubleshooting Information > Profile Directory > Open Containing folder
    * http://kb.mozillazine.org/Preferences_not_saved

  • Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

    Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
    This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
    Any help please?
    thanx

    the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
    try, on the end of that link, see if there's a space built into the page or the link when the page was made
    On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

  • My laptop got wet - battery icon now has a X inside and it is not holding any charge at all, anyone else dealt with this scenario?

    My laptop got wet - battery icon now has a X inside and it is not holding any charge at all, anyone else dealt with this scenario?

    The battery is not detected, so it means that the battery or the battery connector are not working, which is a serious problem.
    Turn off your MacBook and take it to an Apple Store or reseller. It will be an expensive repair if your logic board has to be replaced. Read > https://discussions.apple.com/docs/DOC-5511

  • Why is my location city changed by Firefox to a town I don't live in? I put in my zip code in the weather info and it will not hold it no matter what I do. This is very frustrating and never a problem in the past. IE doesn't have the problem. Help?

    Why is my location city changed by Firefox to a town I don't live in? I put in my zip code in the weather info and it will not hold it no matter what I do. This is very frustrating and never a problem in the past. IE doesn't have the problem. Can anyone help?

    1) Is it a video clip? Something you recognize?  To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
    2) What are your sequence settings?  Right-click your sequence and choose "Item Properties" to verify.

Maybe you are looking for

  • Importing xml file from FCP 7.0 to 6.0

    Hi all. I am sure many of you have figured this out, but after a few grey hairs today, I was finally able to open a clients project done in FCP 7.0 into my 6.0. In text editor you need to open the xml file and change: <xmel version= "5"> to "4". Then

  • The system could not determin a business area for item 00010

    i m getting bellow message while entering stock (MB1C).... No business area can be deermined for item 000010 Diagnosis : The System could not determine a business area for imte 000010. The item has plant (G001) 7 is assigned to company N001 for which

  • IPhone letters don't pop up when keys are pressed

    You know how the letters pop up from under your finger when keys a pressed on the keyboard to let you know which key you press, well sometimes certain letters on my keyboard stop popping up. A restart fixes the key but a few minutes or hours (intermi

  • Poor quality DVDs with DVDPro

    I have recently purchased FCP studio, I'm struggling to get the same quality DVDs with DVDP4. From FCP the QT file looks great, once burned to DVD certain parts of the video look terrible. I'm compiling multiple videos for one program. Some videos ar

  • RBL not working on Exchange 2013 Edge Transport

    Single multi-role server with a couple of mailboxes, recently added an Edge Transport server. After configuring the Edge Subscribtion I added sen.spamhaus.org as a RBL Provider: Add-IPBlockListProvider -Name Spamhaus -LookupDomain zen.spamhaus.org Th