Tune to other Channel that's already recording while it's recording

Maybe this is just the result of a horrible UI, but if I'm recording two shows, I'm on one of the channels (obviously), and want to switch to the other one LIVE (not go to the DVR and "play" what's recorded so far from the beginning), is this possible?
Example: We're recording channel 508 and 509. I'm on 508 but want to switch to 509. I cannot channel up or enter 509. It tells me that I'd need to cancel one recording. But I'm not going to a 3rd channel!
Any way around this?
Thanks,
Jeff

jscooper22 wrote:
Maybe this is just the result of a horrible UI, but if I'm recording two shows, I'm on one of the channels (obviously), and want to switch to the other one LIVE (not go to the DVR and "play" what's recorded so far from the beginning), is this possible?
Example: We're recording channel 508 and 509. I'm on 508 but want to switch to 509. I cannot channel up or enter 509. It tells me that I'd need to cancel one recording. But I'm not going to a 3rd channel!
Any way around this?
Thanks,
Jeff
I can't reproduce your problem.
1) I started recording 600 and 618, but purposely used the Channel Up button to go from 600 to 618, thus stopping on two intermediate channels. Doing it this way, the Last button does not work, but entering the channel number (600 or 0600, 618 or 0618) most definitely worked. I also went into the Guide and selected the other channel from it, and that worked.
2) I then cancelled the recording on 600, went to the already recording channel 618, then down to 617 and started recording that channel. Doing it that way allowed me to use the Last button to switch between 617 and 618 in either direction, as well as use the Channel Up/Down buttons and selection from the Guide.
So to me, my DVR (QIP7232) is working correctly. What model DVR do you have? And what level of the IMG? Were your recordings started by being scheduled or did you start them manually (I have no idea if that makes any difference)?
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.5
Keller, TX 76248 (VHO 1)

Similar Messages

Is there a way to interpet the chords on a track that's already recorded?

Hi,
I know that in the Midi monitor when you play a chord on your keyboard it'll show you the chord name. But, I would like to be able to see the chord name once the part is already recorded. Is there any way to do this? Or is there a way to select the notes in one of the windows and let it interpet the chord (like in Cubase)? I don't see it in the manual.
Thanks

If you're in express a poor man's way to do it is to add a tuner to your channel strip and just look to see what the base of the chord being played is. From there you can extrapolate the rest of it. Silly, but it does work

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
What is the brand/model/settings of the camera that recorded these videos?        ony PMW 320
When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
the video in the Premiere Elements Editor, how many channels does the Audio Meter display?
I just drag and drop video and when playing back only channel 1 will appear
What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
Thanks for the help if possible,Kevin416 873 8374

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

I bought a song from the dixie chicks and i can't play it, i tunes keeps telling me that my computer isn't authorized and when i try to authorize my computer a window comes up and tells me i am already authorized

I bought a song from the dixie chicks and i can't play it, i tunes keeps telling me that my computer isn't authorized and when i try to authorize my computer a window comes up and tells me i am already authorized

Click here and follow the instructions.
(30335)

My Iphone won't synch with the itunes 11, I always got the message that said to record my pc to the itunes but when I try it to record it that said its already recorded... What I need to do last month everithing was fine but now I can't do anything

My Iphone won't synch with the itunes 11, I always got the message that said to record my pc to the itunes but when I try it to record it that said its already recorded... What I need to do last month everithing was fine but now I can't do anything

I a;ready take off the acces of the computer and reput it

HT2729 i have recently purchased a new computer and set up my i tunes account on it. i have synced my ipad but it wont sync the films that are on the ipad already. when i go to add on some new films it tells me i will lose the films that are already on th

Hi i have recently purchased a new pc and set up my itunes account on it - i have synced my ipad to it but it wont sync the films that are stored on the ipad. when i go to add new ones are it says it will delete the ones on the ipad and replace them with the new ones.How can i keep the films that are already on there and get them into itunes?
I am unable to delete my itunes account on my old pc due to technical failure - could this be why?
Hannah

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

How do I create a channel that is made up of specific data from other channels?

How do I index a specific element of a channel? Specifically, if I have a channel of data that is 100 elements in length. Can I create a new channel that is the sum of the 2nd, 10th, and 19th elements of my original channel?
Thanks,
Matt

After searching the message boards I came across this reply:
Dave,
I had previous built an example to perform the data reduction of every Nth point. As Otmar points out, it does have to be done in a script, but this example should simplify things for you:
Reducing a Channel in DIAdem by Pulling Every Nth Point
If you have any questions about this, please let us know. Thanks and have a good one.
Adam B.
Applications Engineer
National Instruments
I downloaded the script, and extracted the useful information. However, when I execute my new script I recieve the error:
Error in ReducChannelTest2 ... Unknown Runtime Error
The code I am executing is
Call ChnAlloc("Newerror0")
Call ChnAlloc("Newerror1")
chd(1,"Newerror0") =chd(21,"error0")
chd(2,"Newerror0") =chd(41,"error0")
The error0 channel is 101 elements in length. Any thoughts?

I am triying to manually add files to my iphone and dont let me. When I check mark on manually manage box on itunes and then apply, itunes said that I already synced my iphone in other computer. I never had use another itunes to synced my iphone. How can

I am triying to manually add files to my iphone and dont let me. When I check mark on manually manage box on itunes and then apply, itunes said that I already synced my iphone in other computer. I never had use another itunes to synced my iphone.
How can I solve these stupid restrictions?

Where are iTunes files located?
No, I do not mean just the music. Copying just the media/music files or the media folder creates problems.

How can I delete old movies that I already purchased, which are saved in my account? Actually I don't want them to be viewed by others who use same account, so is there any solution to delete them? Please advise. Thank you

How can I delete old movies that I already purchased, which are saved in my account? Actually I don’t want them to be viewed by others who use same account, so is there any solution to delete them? Please advise.

Delete Purchases = No.
But there is this...Hiding and unhiding purchases
iTunes Store > http://support.apple.com/kb/HT4919

When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

HT3775 hey guys i have recorded on photobooth some .mov files which i cant play now on quick time player. any possible reasons...!!?? any other player that i should be able to play with..??

hey guys i have recorded on photobooth some .mov files which i cant play now on quick time player. any possible reasons...!!?? any other player that i should be able to play with..??

See my answere to your post in the Mt. Lion forum.

TS1702 I lost all my data when upgrading my iPad to iOs5. App Store doesn't recognize that I already purchased pages. What can I do other than repurchasing?

I lost all my data when upgrading my iPad to iOs5. App Store doesn't recognize that I already purchased pages. What can I do other than repurchasing?

It shows "You do not have any purchased apps available to download" Can I show apple the credit card receipts for apps purchased from them? How would I find any previous account login info?

Satellite P870/05P - TV Tuner cannot find channels

I have just purchased the P870/05P laptop with TV tuner. I have plugged in the antenna cable from my TV to the laptop and run up Arcsoft TV 5.0 and perform a channel scan. It doesn't find any channels at all. Can someone please provide any suggestions on what I may be doing wrong.
The laptop came with Windows 8 pre-installed.
Thanks in advance

> I have plugged in the antenna cable from my TV to the laptop and run up Arcsoft TV 5.0 and perform a channel scan. It doesn't find any channels at all
Check the user manual how to use the TV tuner:
http://www.mytoshiba.com.au/file/download/resource/file/22328/satp870-userguide.pdf
The notebook supports the Integrated Hybrid Digital / Analogue TV Tuner.
This means that you can receive and watch TV channels on your notebook.
If you want to receive channeled via the DVB-T, you have to ensure that DVB-T (digital broadcasts) are available in the region where you are living.
Of course you can connect a set-top box using coaxial cable to receive the programs on cable TV or satellite broadcasting.
The Windows Media Center or in your case Arcsoft tv 5.0 can be used to watch TV programs or record them.

My itunes won't recognise any of the music that is already stored on my computer or let me sync anything to my new ipod nano!! any ideas??

I recently bought a new ipod nano and when i got it home and connected it to my computer I was told my version of i-tunes was not compatable and I had to un-install it and then download it again. After I did this 4 times i eventually managed to get itunes to open on my computer and recognise my new ipod. However after all that hassle my version of itunes now wont recognise any of the music that has already been downloaded onto my computers music files. I have tried copying the music across and also using the add music to the itunes library command and nothing seems to work! I really like the ipod but if i had known that itunes was this difficult to work i would have picked a different type of music player! since i have bought the ipod ive heard nothing but bad things about how difficult and complicated itunes is to work so if anyone has any ideas for how i can fix this problem thatd be great! Thanks

You need a third-party program like one of those discussed here:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Tune to other Channel that's already recording while it's recording

Similar Messages

Maybe you are looking for