Tuner plugin working in 9.1.1?

Is everyones Logic Tuner plugin working within Logic? Noticed over the last couple of days that it's not responding to anything here.
Yes I have soft monitoring on and everything else is working as expected. Not sure when this started.

Aha... might be onto something.
It doesn't work in slot 2 if there is a Ren Comp (WAVES) after it. Weird!!!

Similar Messages

Tuner plugin not correct

Here my reply to question regarding an incorrect Tuner in MS
TinMassOct 7, 2014 1:07 PM Re: MainStage flat a whole step ???
Re: MainStage flat a whole step ???in response to pdelanghe
I just had the same problem .
The real strange thing is ... When I used the the "Tuner" in Logic Pro X
my guitar / tuner plugin worked correctly. ( I tuned the guitar concert/440)
Tuner said said , yep 440
But when I switched over to MainStage 3 Tuner read as flat about a 1/2 step.
Did a restart opened only MS, Still same 1/2 off. Went to Audio preferences
changed couple things and hit "Apply button" Then set them back again to my setting
and again hit apply. Tuner now works correctly.
BTW dhjdhj the sample rate was the same in both apps (MS & Logic) MS just didn't get it together till the "Apply".....
Bug ???
In the "For What It's Worth" category... Logic Pro X (and 9) run much faster and I feel more efficiently
and responsive than MS. MS works my MacBook Pro/CPU harder than a 24 track "Backing Track"
file in Logic (never turns on the fan) Hhhmmmm.....
MacBook Pro, Logic 10.0.7 , MS 3..0.4 & Behringer X32 I/O

Aha... might be onto something.
It doesn't work in slot 2 if there is a Ren Comp (WAVES) after it. Weird!!!

Waves Tune plugin and os 10.4.6

I have a problem with Waves Tune. I installed 10.4.6, and now I always get the message "Error code -1 was returned by the direct TDM driver." Now I can not use my Waves Tune plugin anymore. It all worked fine in 10.4.5.
Any suggestions?
G5 dual 2,7 Mac OS X (10.4.6) 4,5 GB RAM, Logic 7.2, PT7.1cs6, HD3 Accel, 192,2x96i, 96

I'v just received a mail from Waves:
The current OS-X 10.4.6 update causes problems with certain Waves plug-ins.
This happens when using the Mac automatic updates.
In order to fix it, please download Mac OS X 10.4.6 for PPC.
Install it and restart your computer.

Can someone help me understand why my i tunes stop working after my library comes up?

Can someone please help me understand why my i tunes stop working after my library comes up?

Hello generousdragon,
It sounds like you are unable to use iTunes shortly after launching it. Use the following article to help troubleshoot the issue, named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with this step to isolate 3rd party plugins that may be causing an issue, an use the rest of the troubleshooting if needed.
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Hauppauge WinTV-HVR 95Q TV TUNER not working with windows 8.1 HP TouchSmart 15 Notebook PC

I've updated all drivers I can find from the manufracturer. Are there any other HP drivers I need? This worked fine on Windows 7 without having to update to a 'Pro with Media Center' edition. I've updated to Windows 8.1 Pro with Media Center. Another comsumer had their question answered here: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/TV-TUNER-not-working-with-w...
Was going to ask if there was a driver for the Hauppague tuner there but it wouldn't let me post a question asking if there was one of those drivers for the Hauppauge WinTV-HVR 950Q.

I updated all drivers to their latest versoins before beginning. Waiting on response from vendor.

Why wont my .vst plugins work in cs6 on win 7 pro 64 bit

why wont my .vst plugins work on my new os ,win 7 pro 64 bit, i have cs6 and cc installed, they worked fine when it was on xp pro.. even if it finds them and you can bring them up it crashes cs6, any advice is helpful, thanks!!

awb5151 wrote:
But i really want them to work in cs6, i heard you have to use j bridge to use .vst's in cc, is this true..
Yes.
I just dont understand why they wont work in win 7 pro 64 bit , is it an os problem or is it a cs6 problem, when i had cs6 in win xp pro, was it installed as a 32 bit program, if thats the case can i load a 32 bit version of cs6>>>??? thanks!!
It's not the OS - W764Pro can run 32-bit software fine in emulation. Your problem is that there is no 32-bit version of CC. It was widely circulated before release that this was going to be 64-bit only, and that you would need bridging software to run old 32-bit VST plugins.
Apparently, jbridge works fine once you've got it installed and everything in the correct place. I wouldn't know though, because I don't use it - I only use a small number of 64-bit plugins directly. On those few occasions that I want to use a 32-bit plugin, I run it in CS6 Audition (which isn't the CC version, but is 32-bit). So yes, if you have the 32-bit program you can run them in that. Both versions of the software will co-exist quite happily on the same machine, and won't interact at all - except that you have to be careful with your sound device settings.

Why i-tunes not working with the windows 8.1?

i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
can you please help me?

See this support document. http://support.apple.com/kb/TS1538
The latest version of iTunes works just fine with Windows 8.1.

CS6 Plugin works on windows but not mac

Hi,
We have been developing a plugin for InDesign since CS3 and have recently ported it to CS6 (it was ported to all previous versions too, as they came out).
I followed the porting guide etc. and on windows it compiles and runs just ok - the plugin works correctly.
But when i compiled the same files on our mac machine and put the .indesignPlugin file in th plugins directory i can't see our plugin's context menu.
I can see that it is in fact loaded on startup (when i remove it ID loads 325 extensions, when i put it back - 326), but still it dosen't seem to work...
I initially thought that the versioning was off but our PluginVersion resource relies solemnly on SDKDef.h , i also tried putiing the file in CS5's plugin directory and got an error message that CS6 is required - so the version info is fine i guess.
We are using xCode 3.2.5 (because we have to support Mac OS 10.5 and 10.4) to build on mac and i've never had problems before - it worked on CS4, CS5 and CS5.5.
The changes i made when porting were minor and only in the code - so what has changed? and how come it works on windows but not on mac?
Any input is greatly appreciated, i've already spent days trying to understand this.
Thanks,
Dan.

Hi and thank you for replying.
The resources do get compiled correctly (i assume this because we do get a .indesign file at the end - which means the ODFRC ran ok). they are linked correctly in the mac project (i saw a file that determines the version - it's linked the same way against my win and mac projects and the win version works fine so i guess that's ok too).
the context menu is just another menu on the "menu bar" (don't know how to call it?) - i.e where the "file" and "edit" etc. menus are.
I can't seem to understand how come this works fine under windows but not under mac - they are essentially the same projects linked against the same resources (the difference being iCode vs VC10 projects).
can this be related to the fact we're using xCode 3.2.5?
Thank you.

Tuner not working on my TouchSmart 300

Situation: Brand new TouchSmart with tuner not working out of the box.
Driver appears to be installed and working, but tuner will not pick up any channels.
Both ATSC(antenna) and NTSC(converter box used) were scanned and nothing picked up in either mode.
Both LiveTV and Media Center give same results.
HP will be picking it up to be serviced. I'm wondering if it's a Window7 Home Premium 64 bit and driver issue?
I suppose it could be a bad card.
Driver was uninstalled and reinstalled - did not work
OS was reinstalled (online chat said that reinstall fixes 5 of 10 computers with this problem)
Computer: HP TouchSmart 300 - 1000z
Driver: AVerMedia A323 MiniCard Hybrid ATSC version 1.1.64.46
OS: Windows 7 Home Premium
Any ideas? I really like the computer, I really don't want to deal with the hassle of shipping and setup again.
Thanks

This seems like a possible problem with the device access point settings. Are other applications able to connect to internet, for example browser?
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

RF Tuner not working correctly in Pavilion DV6-1200

Having troubles tuning the computer to the tv signal. The signal is via a wall cable RF type, Comcast cable.The computer can not detect the source data, however when a normal tv is plugged into the same cable, it tunes into 35 channels. The tv tunes to the signal prior to June 12, 2009 (NTSC). There is no setup box being used. I have used windows media centre and HP media center to tune the computer in but no success yet. The tuner mode I thought that should work is Analog Cable NTSC, plus tried every other mode many times over. The strange thing about this whole matter I was connected to HP tech support for 4 HOURS on this matter! They could not give me any reason why this was happening!!!! The tv tuner does work with the supplied antenna using the Digital Antenna Mode. When I talked to HP tech support, their so called tv tuner experts, they could not tell me what the Analog Cable NTSC mode was used for! Regards, Ed

Hi,
Please uninstall the existing version and install the newer version:
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64126.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why has the Reload button shrunk and shot to the end of the URL window? How will I find out when the Favloc plugin works in V4?

I had installed Firefox 4, but rapidly had to backtrack to 3.6, then again to 3.5. Two reasons: 1. The three toolbar buttons I use most are Back, Forward and Reload. In 3.5 I can group these nicely at the left hand end; in 4 the Reload button has shrunk and shot across to the end of the URL bar. Why?
2. Versions 3.6 and 4 are incompatible with the Favloc plugin. This is such a brilliant plugin you ought to buy the code and build it in. I am marooned in 3.5 until this plugin works in V4 - running 3.5, how will I find out when it does?

As far as I know, [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ the Classic Theme Restorer add-on] is the only way move the Reload button outside the address bar.
# Install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
# Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
# Next to Classic Theme Restorer, click the Options button.
# On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
# Right-click an empty area of the tab bar and choose Customize.
# Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
# Click the Exit Customize button in the lower right corner when done.
That being said, I should point out that you can reload pages in other ways.
* Right-click any tab and choose Reload.
* Right-click an empty area of the page and choose Reload.
* Press F5.
* Press Ctrl+R (Mac: Command+R).

Hello World plugin works in 32-bit, does not work in 64-bit

I created a simple "Hello World" plugin by following the instructions in Adobe's guide: Getting Started with Adobe Illustrator CC Development, which is available as a pdf here.
The plugin works in the 32-bit version of Illustrator CS6, but I get an error message while trying to launch the 64-bit version. "Error loading plugins. HelloWorld.aip"
How can I fix this error?

You need to build 64 bit version of plugin. Change the configuration to x64 in your visual studio (I am assuming windows) and build. It should work fine.

The last update failed on my window 7 pc, resulting in me having to try it manually download and install, this also failed leaving my I tunes not working, I tried restore back to a safer date, but every time it tried to update it failed. eventually i

The last update failed on
my window 7 home prermium pc, resulting in me having to try it manually download and install,
this also failed leaving my I tunes not working, I tried restore back to a
safer date, but every time it tried to update it failed. eventually it told me
to delete and reinstall, this fails due to the apple mobile device service
failing to start, and asking me if I have sufficient privileges to start system
service, I have tried all suggestions on iTunes page, ie delete everything to
do with apple, and start as administrator, nothing works, help please

I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

What is the latest version of firefox that foxy tunes will work with

what is the latest version of firefox that foxy tunes will work with

It is compatible with Firefox 9
* getfirefox.com
foxytunes are here
* https://addons.mozilla.org/en-US/firefox/addon/foxytunes/

Accordion Plugin works well

My accordion plugin works well now.But while viewing in the tablet or mobile view, when i click my navigation , the first tab of the accordion tab looks like this
What could i do?Please help...
My link : http://bhc.edu.in/commerce/StaffProfiles.php

Google Chrome comes with its own version of the Flash Player plugin.
Your system details list doesn't show that the Shockwave Flash plugin is installed and enabled.
You can find the latest Flash player versions for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

Tuner plugin working in 9.1.1?

Similar Messages

Maybe you are looking for