Tungsten E2 and wi-fi card

As my icon shows, I am a newbie, and I have a very basic question about a wi-fi card. Is this something additional that I would have to purchase since I am striking out with the blue tooth option?
Post relates to: Tungsten E2

Hello SharonML, the Wifi card is another piece of hardware that you will have to purchase.  It is not inlcuded with an E2.
Unfortunately, Palm has discontinued selling the card, so you're limited to the areas of eBay and maybe amazon.com.
"striking out with the blue tooth option"???  What are you trying to do?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • Updated to iso7 and now credit card will not work with itunes account. What is going on?

    When I updated to iso7 my credit card information for my iTunes account is no longer valid. Tried to update my credit card information and it will not allow my current and valid credit card to be used and will not accept any of my other valid credit cards to be used.
    What is going on? Am I missing something or is apple hijacking my paid for accounts again?

    Hi paul.labiche,
    When having iTunes Store connectivity issues, the following articles provide the best solutions:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • I just bought this iPad today any I set up my iTunes account and I purchased a app store card and a iTunes card but when I try to dowload stuff it won't let me what's the problem

    Need help please I just bought this iPad today and I factory reset it and then I plugged into my laptop and downloaded the latest software I went and purchased a app store card and a iTunes card but when I try to download apps it won't let me if anyone can help with this problem it would be greatly appreciated. Thanks in advance. Antawn

    Hello Tntingey,
    The gift card you've given your father must be redeemed via the steps below.
    Redeeming iTunes Gift Cards and content codes
    http://support.apple.com/en-us/HT201209
    Cheers,
    Allen

  • I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

    I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

    The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

  • Problem with NEO2 and sata controller card

    1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
    and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
    2.BIOS version: The newest one, 1C0 or something.
    3.External VGA Type: Geforce 6800 GT
    4.CPU Type: AMD 64 3500+
    5.Memory Type: G Skill ZX 2048mb.
    6.Power Supply Type:
    7.Operating System: Xp Pro
    8.Problem Description:
    Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
    I wrote
    "Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
    It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
    I would be very thankful if you could help me with this problem.
    //Martin

    I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
    Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
    Quote:
     have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
    I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
    I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
    I think this card do not properly support HDD above 120G.
    Please respond to: [email protected]
    http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
    Btw: you have xp sp2 ?
    48bitLBA is not enabled in the first version.
    http://www.48bitlba.com/winxp.htm
    Edit:
    Here's another with complete different setup and same problems
    http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
    I doubt it has anything to do with your motherboard and/or bios.
    Btw: I looked at innovision and their drivers in download area are very old.
    Get the latest SIL3112 drivers for XP here:
    http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
    And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
    Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
    without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
    so having command queing set ON will cause major conflicts in data transfers.

  • Is it worthy to buy a Zen with 2Gb and a SD card of 4 or is it better to buy a Zen with 4

    Hi.
    I'm thinking on buying a Zen, but i'm a bit confused on the issue of if is it better to buy a Zen with 4Gb or a Zen with 2Gb and a SD card with 4Gb, because the diference on the pricefrom the 2Gb to the 4Gb fits a SD card with 4Gb, and will result in a Zen with 6Gb...
    Does the zen works fine with the reading times of the SD cards? Or does the performance drops when reading from the card?
    I would apreciate your experience/knowing opinions.
    Thanks
    BM

    Ask that question here.http://epizenter.net/e07_plugins/forum/forum.php

  • HT204266 I used several apple and iTunes gift cards on my account with relevant codes.  How can I verify all cards have been used when total purchases don't line up?

    I have used several apple app and itunes gift cards to purchase apps and music with no problem.  Codes were entered as required.  Is it possible to get a printout of the card amount and codes to check against purchases.  My total is not jiving.

    No, you can't see a list of card redemptions, nor how items were billed - all you can do is view your account's purchase history via your computer's iTunes : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.

  • I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card.  How can I buy Pages with my iTunes card to my iPad? thank you

    I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card.  How can I buy Pages with my iTunes card to my iPad? thank you

    Have you redeemed your iTunes card to an account associated with an Apple ID?
    Once you have your iPad associated with an Apple ID AND you have an account with a credit card associated with the same Apple ID AND you have some 'store credit' (from redeeming your iTunes card) then purchases use the store credit before they charge the credit card, so you should be ok!
    Personally, I use 'store credit' as a way to monitor whether or not there have been any 'unauthorised' purchases because as soon as the store credit is zero, the security code from the credit card is needed for further purchases!  It does mean that I have sometimes to top up store credit before making a purchase, but 'better safe than sorry'! 

  • I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

    I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
    Thx

    Barbara Hunt wrote:
    Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
    Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
    However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
    Hope this helps,
    Steve

  • How can I configure and control a non-plug and play VXI card using the NI-controller (NI-VXI/NI-VISA software)?

    Defining the slot, logical address and sending data across the card bus are the main operations I would like to perform. The non plug&play card is a VXI send & receive slave card. Low-level programming is probably required. Has anyone tried this before? If so I would be so grateful if you could share your experiences or refer me to someone who has.
    Thank you for your time and help,
    Nandeesh

    VXI cards are, by specification, plug and play, so I'm not exactly sure what you mean by a "non plug&play card." I'm guessing that the card is effectively a VME card. In this case, you can just add the VME device in the proper configuration utility. Here is a link to a document on our website about configuring VME cards (http://ni.com/support/vxi/vmeinfo.pdf).
    You should easily be able set the slot, pseudo Logical Address and memory space. Once configured, you should be able to write to registers using NI-VISA commands (viIn, viOut, and viMove). These high level commands are included in the highreg.c example which shipped with your NI-VISA software (installed in vxipnp directory).
    I hope this helps.
    Trey Hamilton
    National Instruments
    Applications Enginee
    ring
    http://www.ni.com/support

  • HT201251 I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

    I want to use 30  ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

    Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
    Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
    Here is a pic

  • Can I setup an Apple ID with only a Paypal account and NO credit card?

    I recently purchased an iPhone and am looking forward to getting everything setup. I'm currently living in Japan and my japanese bank doesn't have a card that has the jcb logo, nor do I have a credit card. So...
    Can I setup an Apple ID with only a Paypal account and NO credit card?

    You can set up an apple Id without a credit card using this article: http://support.apple.com/kb/ht2534
    After that, you can login at iTunes on a computer, go to 'Account' and just change the payment information to something else.
    NB: where I live, the only three options for payment are creditcard, iTunes gift cards and Click&Buy, not Paypal. It might be possible elswhere though, I'm not sure.
    Good luck

  • I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

    I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

    Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
    G5 PCIe options are listed here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

  • HT1933 I make a purhase on March 6 at 11:33 Order number MHOXX3TK9J for $1.99 and my credit card was charged $20.00 can you please help me find out why this happened

    I made a purchase on itunes on March 6 at 11:33 order umber MHOXX3TK9J for 1.99 and my credit card was charged $20.00 please help me find out why this happened.

    Contact iTunes support at the link below.
    https://ssl.apple.com/emea/support/itunes/contact.html

Maybe you are looking for