Tungsten T3 Hot Sync in Windows 7 Ultimate 64 bit and WIndows XP mode

I upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not sync. I downloaded desktop 6.3, 4.1.4, and 4.1.4e. I tried all three in both windows 7 and windows XP mode which I am told is a 32 bit O/S but I'm really not sure. I have tried hot syncing in bluetooth in windows 7 the T3 and Laptop connect but it keeps telling me the port is in use by another program? Does anyone know what I have to do to get it to sync or am I doomed to throw my trusty T3 out? Any Ideas?
Post relates to: Tungsten T3
This question was solved.
View Solution.

Stan_R wrote:
link no longer works
You are correct, but you have pulled up a post that is over 3 years old!
If interested in syncing to a 64bit system, please view the sticky thread at the top of this section entitled "64bit Windows USB Drivers for Palm Desktop"...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Dual boot WIndows 8.1 and Windows 7 (32 bits) from separated disks gives error 0XC0000359

Hi all,
I have two disks, each with a (OEM) installed OS on it, a Windows 8.1 (64 bits) and Windows 7.0 (32 bits). The later came from mine old computer that unfortunately died to soon. So I have two disks and two OS in an brand new machine (with UEFI BIOS etc.).
Installing a dual boot option was a pace of cake. However booting into Windows 7.0 gives following error:
"Windows failed to start. A recent hardware of software change might be the cause.
File:\Windows\system32\winload.exe.
Status: 0XC0000359
Info: the application or operating system could't be loaded because a required file is missing or contains errors".
There is lot discussions about installing two OS but that is not mine problem: both are already installed.
Also there is much rumour about the UEFI BIOS and support for older systems. In mine medion computer the Security Boot option is disabled (by the OEM), so booting from a old BIOS should be possible, must isn't.
Someone advised me to run the recovery disk (of Windows 7.0) and run Bootmgr. However the system refuses to boot from CD/DVD with the recovery disk of Windows 7.0 inserted, booting from the recovery disk of Windows 8.1. goes fine.
Removing the disk with Windows 8.1 installed on it and directly booting in Windows 7.0 fails too with the message: "Reboot and Select proper boot device or: Insert boot media in selected boot device and press key". Also in this case the system
refuses to boot from the Windows 7.0 recovery disk.
Could you please help me?

Hi,
To rebuilt boot loader, I suggest we can try following command when you enter Windows 8.1.
Run cmd as administrator and type following command:
BCDboot [Partition Letter with windows 7 installed]:\windows
Note: if you installed Windows 7 on Partition F, the command can be write as: BCDboot F:\windows.
Then, restart and boot into Windows 7.
What’s going on?
Kate Li
TechNet Community Support

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

DAC 10.1.3.4.1 Server on Windows (64 bit) and Linux x86 (64 bit)?

Hi Friends,
Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
Windows (64 bit) and Linux x86 (64 bit)
Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
so will it mean that the same dump is used for both 32 and 64 bit
1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
can the above dump is used for both 32 and 64 bit windows?
2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
can the above dump is used for both 32 and 64 bit Linux?
The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
Please confirm .
Regards,
DB

It is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
Edited by: user12838563 on Jul 13, 2011 11:35 PM

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What i need to migrate portal EP 7 windows 32-bits to windows 64-bits

Hello,
What i need to migrate portal EP 7 windows 32-bits to windows 64-bits.
database ORACLE 10.2.0.2.
thanks

Hello,
i see this step in system copy installation guide.
can i do this without do a hetgenreous system copy ?
Windows Oracle: In chapter "Generating the Control File Structure" of the system copy guide for the database specific system copy procedure, add the following information as Step 1:
If you want to migrate your database from 32-bit to 64-bit or vice versa, add the following lines at the bottom of the control.sql file for Oracle 9.2 or Oracle 10.2:
Oracle 9.2: shutdown immediate
startup restrict
spool utlirp.log
@?/rdbms/admin/utlirp.sql
spool off
alter system disable restricted session
Oracle 10.2 shutdown immediate
startup upgrade
spool utlirp.log
@?/rdbms/admin/utlirp.sql
spool off
Shutdown immediate
Startup
Spool utlrp.log
@?/rdbms/admin/utlrp.sql
Spool off
exit

Is iTunes 10.5 beta available for windows 32 bit and where is it found?

New to the developers site. Can someone tell me if iTunes 10.5 beta is available for Windows (32 Bit) and where it can be found for download? Thanks.

You're out in the public forums here, bryan. Best not to ask questions like that here ... it's a breach of your NDA. Try the developer forums instead?
http://developer.apple.com/devforums/

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Frequent Fails when installing Adobe Flash Player (Windows XP, Windows 7, Windows 8.0, and Windows 8.1)

Constantly see the following error message from Adobe Flash Player Installer:
Error has been encountered. Close this window and try downloading again.
What in heck does that error message mean?
This message occurs most of the time when I try to update to the latest version of Adobe Flash Player.
It would be one thing if it was only occurring on Windows XP, but it shows up on Windows 7, Windows 8.0, and Windows 8.1 frequently.
Just for curiousity looked at the Windows 8.1 Event Viewer and NO error message shows up there.
Would be nice to:
(1) know what the error really is so that it can be reported to you to get it fixed once and for all.
(2) have Adobe Flash Installer NOT to delete itself every time that the installer is run.
(3) have an OFFLINE download installer to download and install Adobe Flash Player without the MacAfee installer.
(4) have Adobe UNCHECK that the Install MacAfee installer that you have to opt out of each time you do an Adobe Flash Player download. You should make it to OPT IN not OPT OUT! Don't need another program installed without my permission. This causes issues when I have to uninstall MacAfee on computers that others in my family use.
It seems to takes up to 20 times to download the Adobe installer over a period of many days or weeks to get it to install properly.
I have written software for over 36 years as a computer programmer and now Senior Software Developer. I have do installers on my own and have to figure out how to solve my own issues on the installers to get them fixed.
This issue doesn't seem to be tied to any particular version of Windows... Same issue occurs on Windows XP, Windows 7, Windows 8.0, and Windows 8.1! The ONLY commonality seems to be Adobe Flash Player.
Certainly Adobe should be smart enough to fix this issue once and for all.
If the issue is that there is a network congestion error that it cannot download the installer, please say so and please please please DO NOT delete the downloaded installer every time that it is run on a PC.
I'd like to fix the security issues with the Adobe Flash Player AS SOON as there is a patch for it. I don't like having security issues over a long period of time.
Please address this issue so that I can put this to bed and not have to keep sending you messages that once again the Adobe Flash Player Installer is yet again broken!
Certainly you have a staff at Adobe that CAN fix this problem quickly!

more information about errors can be found in the FlashInstall.log file in C:\WINDOWS\system32\Macromed\Flash (and the SysWOW64 equivalent on 64-bit systems)
the offline installers (below) do not delete themselves
you can find the offline installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
the offline installers are not bundled with any 3rd-party crapware

Competition problem between Windows 8.1 and Windows 7 on Photosmart C5180 connected via LAN

Hello everyone, I am writing because I need some advice / help on a problem last night while configuring a small network.
The network is made up as follows:
2 notebook: Windows 8.1 and Windows 7
3 different printers:
2 USB connected to the respective notebook,
1 HP Photosmart C5180 network printer connected via LAN via a router.
The situation is the following:
both notebooks recognize the various printers and are able to send and print documents but,
when the print command starts from both notebook SIMULTANEOUSLY or at a distance of a few seconds, the only document printed is ALWAYS the one sent from the notebook with WINDOWS 8.1. The other one submitted by WINDOWS 7 IS LOST without being reported.
So if I ask of you is someone experienced in the print queues, print drivers, competition in the print jobs that can help me in solving this problem.
Thanks in advance

Hello cesco,
Welcome to the HP Forums.
I see that you are having a communication issue when attempting to print on two separate printers at the same time.
This will be a communication issue for sure. The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer.
There is no way that you can print from one computer to two separate printers at the same time.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

SCM update for Windows 8.1 and Windows 2012 R2

Hi,
When are we likely to get an update to SCM for Windows 8.1 and Windows 2012 R2?

Hi
you must add these lines in ZTIGpoPack.wsf (for MDT) and LocalGPO.wsf (for LocalGPO), and for MDT 2013, copy ZTIGpopack to Deploymentshrare\Scripts
sOSVersion = oEnvironment.Item("OSCurrentVersion")
            If (Left(sOSVersion,3) = "6.3") and oEnvironment.Item("IsServerOS") then
                    sOS = "WS2012R2"
                    oLogging.CreateEntry "Using Windows Server 2012 R2 GPO Pack", LogTypeInfo
            ElseIf (Left(sOSVersion,3) = "6.3") and Not(oEnvironment.Item("IsServerOS")) then
                    sOS = "Win81"
                oLogging.CreateEntry "Using Windows 8.1 GPO Pack", LogTypeInfo
Regards
Thanks for this, but you also need to update the GPOPack.wsf in (each relevant) template folder of the Deployment Share like this:
        If(Left(strOpVer,3) = "6.3") and (strProductType <> "1") then
    strOS = "WS12R2"
        ElseIf(Left(strOpVer,3) = "6.3") and (strProductType = "1") then
    strOS = "Win81"
        ElseIf(Left(strOpVer,3) = "6.2") and (strProductType <> "1") then
    strOS = "WS12"
        ElseIf(Left(strOpVer,3) = "6.2") and (strProductType = "1") then
    strOS = "Win8"
As ZTIApplyGPOPack calls GPOPack.wsf.
(Which is what I think Scorpio92 probably meant when you said to edit LocalGPO.wsf...)

Finding the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections

Hi
Where can I find the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections that appear when I write the /store /v options of bcdedit command?
Thanks
Bye
Balubeto

All the BCEDIT command line options are described here:
https://technet.microsoft.com/en-us/library/cc709667%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Jerry
Actually, I wanted to find the explanation of all entries (as inherit or
device or osdevice) of the Windows Boot Manager and Windows Boot Loader sections
that appear when I write the /store /v options of bcdedit command?
Thanks
Bye
Balubeto

Hyper-V on Windows 2008R2 Running Windows 8.1 and Windows Phone

I am a lone wolf developer running Hyper-V on a legally-licensed Server running Windows Enterprise 2008R2. I have extremely limited research funding.
Since I need to evaluate Windows 8.1 and Windows Phone development for the 1080p Phone Emulator, I created a Virtual Machine of Windows 8.1 Evaluation Copy RTM on my server. I am trying to create software for the Nokia Lumia 1520 Phone-Tablet.
Everything in the Windows 8.1 Virtual Machine runs perfectly from Hyper-V on Windows 2008R2, except for one problem related to my Phone development project. Networking is perfect, the display is perfect, there are no other issues except this "gotcha".
The problem appears with the Windows Phone SDK Update 4, which supports a 1080p
Windows Phone Emulator. This emulator is supposed to load it's own instance of a Windows 8.1 Hyper-V virtual machine
when debugging the Phone Application from Visual Studio 2012 Express.
This Emulator tries to start it's own Hyper-V session inside Windows 8.1. In my humble opinion, it should be possible to do this (load a Windows 8.1 HyperV Virtual Machine inside a "parent" Virtual Machine).
It presents this error message instead:
Essentially, Windows 8.1, running in a Virtual Machine, should also be able to create a Virtual Machine inside it's own Virtual Machine. That is the required design of the Phone Emulator (must be able to intantiate a Windows 8.1 Hyper-V Virtual machine to display
the Phone).
If that does not work, then I guess it must not be a supported configuration. If not, then I need to licence Windows 8.1 on a separate physical computer. Anyone want to tackle this?
+__+

I have a legal, licensed Windows 2008 R2 Server with the Hyper-V Role. I then downloaded the time-limited
Windows 8.1 RTM Evaluation Version and successfully installed. It works flawlessly. Next, I installed the
Windows Phone SDK Update 4 on top of
Visual Studio Express 2012 for Windows Phone.
It all works flawlessly, except for one little problem.
Since I am interested in evaluating and testing the Windows Phone SDK 1080p Emulator, I must run
F5 - Start Debugging in Visual Studio in order to see my Windows Phone application in 1080p resolution. Well, the Emulator
almost completely starts up successfully, but at the last push it gives an error. This error is shown below as a JPEG.
Does anyone know which of the "Hyper-V components is not running?"
+__+

Maximize Code Reuse Between Windows Phone 8 and Windows 8(via Microsoft Dev Center)

Win8 App Developers: Picked this up on the Microsoft Dev site..great tips for reusing code between your Windows 8 app and Windows Phone.
Summary: In this section, we will help you make the right choices to maximize code reuse in your apps. As a developer, you want to streamline your development and make maintaining your apps as efficient as possible. By working smarter, you give yourself more time to develop more apps and fill the marketplace with your creations. When building an app for Windows Phone 8 and Windows 8, you should look for opportunities to share code, designs, and assets as much as possible so that you maximize the return on your investment. This section describes the sharing techniques that you can use when building you app for both platforms.Read full article
LenovoDev.com Manager

Very useful! Thank you!
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

I can't download any rented movie. When I start downloading Windows iTunes crashes and Windows close this program. What should I do?

I can't download any rented movie. When I start downloading Windows iTunes crashes and Windows close this program. What should I do?

If the problem is iTunes slowing down and not appearing to run correctly, you should check this Apple article out-> Apple software on Windows: May see performance issues and blank iTunes Store
You may want to try resetting Winsock as a temporary fix.
1. To do so, please do the following in an administrator user:
Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
Windows XP: Click Start > Run and type in cmd.
2. Enter the following command:
netsh winsock reset
3. Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP.

Tungsten T3 Hot Sync in Windows 7 Ultimate 64 bit and WIndows XP mode

Similar Messages

Maybe you are looking for