Tungsten T5 and Centro

How do I get the information from Tungsten T5 to my Palm Centro? When I downloaded the software that came with the Centro, it cleared the data from my Tungsten and now I can't get the data from my Tungsten back on my computer because it says it can't find the device, uggh!
Thanks,
Dorie
Post relates to: Centro (AT&T)

How to Upgrade from a Previous Palm device to a Newer One: http://kb.palm.com/ and enter 12926 (General Upgrade guide) or 45175 (Upgrade to Centro) into the "solution ID:" box (lower right).
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Tungsten E to Centro

I have a Tungsten E and a Centro. When I sync either device, niether loads the other's calendar. Can this be done and if so, how? This is quite important to me and the reason for purchasing the Centro. Help is appreciated.
Post relates to: Tungsten E

Search engines are your friend!
Entering "syncus for Palm" into Yahoo produced over 1,000 hits in a matter of seconds.
Here's one:
http://www.palmgear.com/index.cfm?fuseaction=software.showsoftware&PartnerREF=&siteid=1&prodID=44684
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Tungsten e2 and datebk3

i have just upgraded my tungsten e to an e2. while datebk3 worked just fine on my e, there is an enormous lag time when i try to access it and exit from it on the e2. according to the pimlico site, there shouldn't be a problem but... i would appreciate any comments.
Post relates to: Tungsten E2

Hi, and welcome to the Palm Community Forums.
DateBk3 was released long, long ago, I'm pretty sure long before the Non-Volatile File System devices were released by Palm (beginning with the T5 and the Treo 650). Maybe that's a reason for the delays. They're now up to DateBk6.
I suggest you download the trial version of DateBk6 to see if it works better, and consider an upgrade if it does.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Windows Vista with a Tungsten E and Tungsten W

What operating system should I use to manage Tungsten E and Tungsten W while running Windows Vista?
Post relates to: Tungsten E

Hi, and welcome to the Palm Community Forums.
The Windows Hotsync board is chock full of threads and stickies regarding Windows Vista and older Palm devices such as yours.
32-bit Vista: use Palm Desktop 6.2.2 plus PalmHotsyncSetup from www.pimlicosoftware.com
64-bit Vista: USB Hotsync won't work (no drivers). Must use IR beaming, Bluetooth or Wi-Fi to Hotsync
p.s. I have merged your two threads
Post relates to: None
Message Edited by smkranz on 02-14-2009 07:28 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Tungsten T3 and I get a error message

I'm trying to sync my Tungsten T3 and the message I get on my T3 is "Connection between your handheld computer and the desktopcould not be established. Please check your setup and try again"
I have changed Ports and changed USB ports. Nothing seems to work. When I touch the Sync button on the cradle... I hear 3 beep sounds. In the past I only heard one.
Post relates to: Tungsten T3
This question was solved.
View Solution.

Hello and welcome to the Palm forums.
Do you see the hot sync icon (circle with red and blue arrows) on the bottom right of your computer screen? Is there an arrow with the option to "show hidden icons"? If you do not see it there, hot sync will be disabled and you will keep getting that message (the connection between your device and the desktop could not be established...).
To enable the hot sync program once again, click on Start > Programs/All Programs > Palm OS Desktop/Palm One > Hot Sync Manager. It will take about 5-10 seconds and the icon will be there once again.
Also, make sure your device is firmly plugged in to the cable that connects it to the computer. Check that the usb port is plugged into the computer as well.
Now the sync should go through.
Post relates to: None

Linux and Centro sync???

Just wondering if any one has been succesful in getting a Centro to sync with KDE Kontacts, and how you did it.
I have had a Tungsten E for several years and syncing was and is no problem. I have been using KPilot but with the Centro KPilot just crashes and I can't do a sync.
Any help would be greatly appreciated.
Thanks in advance.
Post relates to: Centro (AT&T)

Sorry for the slow reply, I have been trying all kinds of things to try and get this to work. Unfortunately no luck. The one thing that I haven't tried seems to be the most likely solution, and that is to use J-Pilot. I really am not intrested in using J-Pilot, since Kontacts is my PIM system. As far as the latest K-Pilot version I have that but there is svn version and that is usually not knownfor stability so I'd rather stay away from it. Thank you for your suggestion however, I am setting up a partition to install a experimental linux so I can try svn and so I can experiment with diffrent set up and linux sync programs to see if I can get anything to work. Will post any success I have for others to reference.
Post relates to: Centro (AT&T)

Tungsten E2 and wi-fi card

As my icon shows, I am a newbie, and I have a very basic question about a wi-fi card. Is this something additional that I would have to purchase since I am striking out with the blue tooth option?
Post relates to: Tungsten E2

Hello SharonML, the Wifi card is another piece of hardware that you will have to purchase. It is not inlcuded with an E2.
Unfortunately, Palm has discontinued selling the card, so you're limited to the areas of eBay and maybe amazon.com.
"striking out with the blue tooth option"??? What are you trying to do?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Tungsten E and Mac OSX 10.5.6

I have a Tungsten E that I haven't used in a while, but had last hotsync'd to my desktop computer, which had Mac OS 10.4.
My laptop, which I'd like to get the palm software on is OS 10.5.6.
But when I went to install on my laptop, I see in the read me file that the Tungsten E software that came with the palm is only for OSX version 10.1.2 to 10.2.6.
Do I dare install it on my 10.5.6? If I do, is the Tungsten E software upgradable to this system? If so, where can I find that update?
Confused in NH!!!! Appreciate any assistance!
Susan
Post relates to: Tungsten E

Hello sgbe59 and welcome to the Palm forums.
I would download and install the latest version of Palm Desktop for the Mac, Palm Desktop 4.2.1 Rev D. You can download it for free here.
Alan G
Post relates to: Treo 755p (Sprint)

Calendar and Address will not sync between Desktop and Centro after removing CompanionLink Pro

I did the 14-day trial of CompanionLink Pro software for syncing my ACT! 2010 with my Palm Centro. When the 14-day trial ended, my Palm Address and Calendar applications ceased syncing between the Palm Desktop and Palm Centro. I spent 1-1/2 weeks in chat sessions with both CompanionLink tech support and Palm tech support without any success to resolve the problem. Has anyone experienced this problem, and, if so, how did you resolve it?
I use the following:
Palm Desktop by Access ver. 6.2.2
Windows 7, 64-bit
Palm HotSync Manager ver. 7.0.2
Palm Centro
I have installed and uninstalled both CompanionLink Pro - 14-day trial and the Palm Desktop over a dozen times each. Also, when I first install the Palm Desktop, the HotSync Manager shows the Palm apps for Calendar, Address, ToDo List, and Memo. However, when I reboot my computer, those same apps no longer show on the HotSync Manager.
Thanks for any suggestions you might have for me to try to fix this problem.

When you uninstalled Palm Desktop did anyone suggest a "clean uninstall" where you pull out the registry keys? Also when you restart your computer what shows under the hotsync manager (If you can list everything that would be very helpful)?

Palm Tungsten E2 and Mac 10.3.9

I am getting a Palm Tungsten E2. What issues should I be aware of when trying to use it with iSync/OS 10.3.9? I plan on using it to keep my calendar and contacts handy, for the most part.
Also, I foresee upgrading to a new computer within 6 months- will the Tungsten still be useful with the new OS?

First things first...all installations should be updated to 4.0.5.
Bob

Tungsten T5 and Windows Vista 64-bit

I just got a new laptop with Windows Vista 64-bit. I have bluetooth on my laptop. I am trying to figure out some way to sync my T5 with Vista 64-bit. Can someone please help me!
Post relates to: Tungsten T5

jennrankin, please view this similar thread to yours with answers how to sync your T5:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=45281&jump=true
While there is no USB driver written, it is most certainly possible to sync a T5 via BlueTooth or Wifi!!!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Prob w/ Tungsten T3 and Sun One

I have a Tungsten T3 Palm Pilot that is connecting to a Windows XP Professional laptop. This machine has 1GB of RAM, 40GB HDD, and 2.3GHZ. The problem that I am having is that when I try to synchronize contents from the iPlanet calendar server to the Palm Desktop ( Palm Desktop 4.14 ), I get the following error message shown here:
Sun ONE Synchronization
Errors and Warnings
Serial #: 1
Application: Date Book
Type: Error
Data:
Start Date =
Start Time =
End Date = 12/31/1970
End Time =
Description = \
Alarm = 0
Alarm Date =
Alarm Time =
Private = 0
Note =
Error Message(s):
Field out of range: Start Date
It gives me the option to proceed but when I click on proceed nothing gets transferred over, even though the message box says "Synchronization completed successfully". I have re-installed the Palm Desktop software, the Sun One Software and even went as far as starting from scratch and deleting all Palm and Sun One entries from the registry and re-installing from there with no luck. There is no date that I am aware of, boasting the year 1970 ( as stated in the log ), so I dont know why the application DateBook is screaming about this. Any help with this would be greatly appreciated it, it seems that I have tried everything. I even went to the Sun One and Palm Support Sites but still I didnt have any luck of finding the solution to this. btw I installed the latest Sun One patches but still no luck and also updated the Palm Desktop application.

Hi Sergio,
Have you tried enabling full debugging on the Sun synchronisation tool? This may provide you with additional debugging information to help resolve your issue.
To turn on full debugging, run:
Start -> Programs -> Sun One Synchronization -> Sun One Synchronization Debug Log
Set the logging level to 5 and try the synchronization again.
The debug log is placed in:
C:\program files\common files\XCPCSync\Log\rsSync.log
Cheers,
Shane.

Tungsten C and Vista x64

Does anyone know how to synch a Tungsten C via USB on a computer running Vista x64? Will I also be able to synch 3rd party apps?
Very frustrated!
Post relates to: Tungsten C

I got my WiFi hotsync to work fine on my Vista 64 system. The latest Palm Desktop versions did not work for me, only the original set up disk worked. Make sure all previous versions of Palm Desktop that you may have tried to install are uninstalled first and to be safe, reboot after the uninstall. Go to help and support in your start menu. Type "compatibility wizard in the search pane. Start the wizard. Follow the directions and select the Start with XP service pack option. Also choose the start with cd option. Insert the original Tungsten C installation disk. You may have to fool around with the various screens that come up next, but the bottom line is, install the original program from your installation disk under the run with XP option. You will then be able to hotsync with Wifi after you set up the wifi on your palm with the correct computer name and ip address. (VPN is not necessary.). I have not yet tried the USB as it is still set up on a backup computer with XP, but I suspect thet it will work. You may have to reboot before the hot sync after installation. Also you will note an icon in the taskbar that shows that there is a program that was blocked from startup by Vista. You have to click on the icon and open the blocked program which is Palm Desktop before each hotsync. (It opens the hotsync icon on the taskbar and then allows the options menu in the palm desktop program to work). Also you will probably have to open the hotsync icon on the taskbar and configure the setup before first hotsync.

Tungsten T5 and New Vista Computer

Okay--I believe I've tried everything--4.1 and 6.2--my computer recognizes something has been plugged in--but keeps calling it Palm One (in device manager and it has a yellow caution triangle with an exclamation point in it)--which it isn't it's a TungstenT5--I still cannot get a hotsync to happen and I can't understand half of what the heck everyone has written on this subject before...someone please, please tell me in clear language what my best bet would be to get things working. I have been working on computers since the mid-80s, many programs, many computers--both MACs and PCs-- but this has got me baffled.
Thanks in advance.
JK
Post relates to: Tungsten T5

Okay--three days later--got a bluetooth dongle--fixed bluetooth connection problems on new HP Pavilion and performed a hotsync---hot sync successful--but nothing shows up on my computer--where did it go--how do I get it to show up in Desktop Access--or do I need my old desktop?

Tungsten T5 and Centro

Similar Messages

Maybe you are looking for