Tuning off issues: please help

Please help!!
I have had my nano for a week now and was working until last night. When I select the music folder, it turns off and shows the apple logo. What do I have to do to fix this??
Please help
iPod nano Windows XP

Hi Cmart7,
Welcome to Apple Discussions
You might want to look at Knowledge Base Document #61584 goes over When the iPod Only Shows an Apple Logo and Doesn't Start Up. You might also want to look at "The Five Rs", which are the main troubleshooting procedures.
Jon

Similar Messages

Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYS

THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS...

Headerrenderer issue -Please help

Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>

I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Why can't I make a kik account? I have IOS6 and higher and my restrictions are turned off! Please help!

Why can't I make a kik account? I have IOS6 and higher and my restrictions are turned off! Please help!

What happens when you try?
See:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Contact the developer/go to their support site
https://kikinteractive.zendesk.com/home
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

My iphone keeps freezing, then turning itself off. Please help me resolve the problem whatever it is

My iphone keeps freezing, then turning itself off. Please help me resolve the problem whatever it may be.

You said that you restored it. "forgot to mentioned that ive tried all of that"
When you restore, you can restore from backup or as new.
Did you or did you not restore it?
iPhone User Guide (For iOS 5.0 Software)

I connected my iPad to wireless, now my MacBook will not download new mail (Charter) unless I turn the iPad off. Please help?

I connected my iPad to wireless, now my MacBook will not download new mail (Charter) unless I turn the iPad off. Please help?

Is there anything in this link to help, particularly in the Troubleshooting section at the very end? http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=2234

I forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod

i forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod...

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
And also see How to Recover Forgotten iPhone, iPad Restrictions Passcode.

Trackpad Issue - Please Help!

Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
J

I'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.

HT1551 I by mistake turned on my speak feature on my apple TV, now it speaks everthing when I navigate the remote. I cannot figure how how to turn it off. Please help

I by mistake turned on my speak reature on the my apple TV. Now it speaks everthing when I navigate through the remote. I cannot figure out how to turn it off.
Please help.
Thanks,
BKK speak.

Hi jwerrr,
On your Apple TV, choose Settings > General > Accessibility
Change VoiceOver setting to OFF
For more information, click on the link below:
Apple - Support - Apple TV
Cheers,
Judy

Transport Issue Please help

Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
Samit

Hi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D

Why i cant install adobe creative cloud - i try to download afew time's when i start the install its turns off..please help me fix that i wanna try AI

why i cant install adobe creative cloud - i try to download afew time's when i start the install its turns off..please help me fix that i wanna try AI
when its go to downloading Creative cloud to des its go down

http://prntscr.com/4iaboa
http://prntscr.com/4iabrvx
anyone can help me please?

IPOD NANO WONT TURN OFF! PLEASE HELP

my ipod is 3 days old and wont turn off! i bought it in singapore and i downloaded itunes on the computer in singapore and put songs and pictures on it, and it would turn off. the next day i was on the plane and i was listening to it and i went to turn it off and it wouldnt, i got it off by putting sleep timer on so it automatically went off but i couldnt turn it off by pressing play pause button or menu button. i have tried resetting it but wen you reset it you have to turn it off and i couldnt turn it off. everything else workd fine but it will not turn off!please help me its only 3 days old!!
iPod nano 2GB Windows XP

The iPod does not need to be turned off to reset it. Here are the instructions for resetting the ipod. If this fails to do the trick you may want to try and do a restore.
http://docs.info.apple.com/article.html?artnum=61705
Hope this helps

I just changed my iphone 4s and received another one as i was still under my one year warranty, and now when i play music via headphones there is a volume limit on it, i have tried to turn it off but it wont turn off someone please help

i just changed my iphone 4s and received another one as i was still under my one year warranty, and now when i play music via headphones there is a volume limit on it, i have tried to turn it off but it wont turn off someone please help>>>

Hi kingminjing,
Have you checked your Control Panel to make sure you don't have the flashlight turned on?
Swipe up from the bottom of the screen and make sure the flashlight icon (bottom left-hand corner) is not white. If it is, tap on it to turn it off.
Cheers,
GB

Tuning off issues: please help

Similar Messages

Maybe you are looking for