Tuning RMAN backups
Hello,
Would someone help me with the RMAN configuration for backup to disk? I am new to RMAN so I have no idea. Below is my database configuration.
Windows 2000 SP4
Oracle9i binaries on C:\ drive
Database (datafiles) on D:\ drive
Logs on E:\ drive
I have a total of 5 datafiles with approx. 400GB total. I would like to use RMAN to backup my database to disk in a SAN. The D: and E: drives are using RAID5. If I want to run the backup database in RMAN, the default is used. I guess my question is, how do I list all the default settings in RMAN and how do I optimize RMAN to backup my database (i.e. multiplex, number of channels, MAXOPENFILES, FILEPERSET, disk buffer, etc...) and the actual RMAN commands to perform these tasks.
Thank you very much.
Once in RMAN, you can execute the following to see all the default settings:
RMAN> show all;You may want to read over Recovery Manager Quick Reference and Recovery Manager User's Guide to get details on the parameters available to you for configuring the various backup options.
Similar Messages
-
RMAN backup performance tuning
Hi All,
We have oracle 9iR2 two nodes RAC on solaris 9, I am looking for some helpful material on RMAN backup performance tuning, though i went through oracle's official RMAN performance tuning guide, still if there is some really nice material please let me know!
TIAOracle Material is the best.
Anyway, the one given below is also a good P&T book.
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm
I am looking for some helpful material on RMAN backup performance tuningTip: Give a good value for large_pool_size buffer for a better RMAN performance. For RAC configure channels on multiple nodes for parallel backup process through RMAN,
CONFIGURE DEVICE TYPE sbt PARALLELISM 3;
CONFIGURE DEFAULT DEVICE TYPE TO sbt;
CONFIGURE CHANNEL 1 DEVICE TYPE sbt CONNECT 'usr1/pwd1@n1';
CONFIGURE CHANNEL 2 DEVICE TYPE sbt CONNECT 'usr2/pwd2@n2';
CONFIGURE CHANNEL 3 DEVICE TYPE sbt CONNECT 'usr3/pwd3@n3';
BACKUP DATABASE PLUS ARCHIVELOG DELETE INPUT;
[email protected] -
Recently we have enabled RMAN in oracle database 11gR2.
We are using Oracle secure backup 10.4, solaris 10 and SL24 tape autoloader.
We have performed full database backup with size 610GB using RMAN to tape and it took 7hrs to backed up.
Could you please advice me how to fine tune the performance of RMAN.
Thanks in advance,
veijar
Edited by: veijar on Sep 6, 2012 11:03 PMHello;
I like this chapter :
Tuning RMAN Performance
http://docs.oracle.com/cd/B28359_01/backup.111/b28270/rcmtunin.htm
Additional information :
http://www.oracle.com/technetwork/database/features/availability/s316928-1-175928.pdf
http://juliandontcheff.wordpress.com/category/rman/
http://levipereira.wordpress.com/2011/01/28/rman-performance-tuning-notes-my-oracle-support-metalink/
http://levipereira.files.wordpress.com/2011/01/tuning_rman_buffer.pdf
Best Regards
mseberg
Edited by: mseberg on Sep 7, 2012 11:28 AM -
Alter system flushed shared pool in RMAN backup
Hi,
I am trying to take RMAN backup of 11.2.0.1 Database in IBM AIX 6.1 server.
The RMAN is hanging .
Though the backup gets completed, The channels allocated doesnt get released and the RMAN gets hanging.
In earlier RMAN backup Scripts,
the DBA was using alter system flush shared pool in RMAN backup script and the backup was getting succesful.
Now my question is , is using ALTER SYSTEM FLUSH SHARED POOL have any performance impact on the database.
Regards,
TEJASTEJAS_DBA wrote:
Hi,
I am trying to take RMAN backup of 11.2.0.1 Database in IBM AIX 6.1 server.
The RMAN is hanging .
Though the backup gets completed, The channels allocated doesnt get released and the RMAN gets hanging.Are you setting the large pool? If you don't, then rman uses the shared pool. Read about tuning rman performance in the docs.
>
In earlier RMAN backup Scripts,
the DBA was using alter system flush shared pool in RMAN backup script and the backup was getting succesful.
Now my question is , is using ALTER SYSTEM FLUSH SHARED POOL have any performance impact on the database.Yes, you are allowing the components in there to be loaded in the random order of whatever is called first. This may have a good impact if you had some fragmentation in there, or it could be mildly bad if everything was well sorted, or it could be very bad if you are unlucky or have some pattern of invalidations or should be pinning something or who-knows-what. It generally is considered not a good thing to do as a habit. You wind up with [url http://tkyte.blogspot.com/2012/05/another-debugging-story.html]rainy Monday scenarios.
Edit: I notice there are some bugs, including very slow performance when using a catalog. When you say hang, how long are you waiting? Have you considered current patches?
Edited by: jgarry on Aug 8, 2012 11:09 AM -
RMAN BACKUP PERFORMANCE.
Hello Sir,
Oracle Version : 9.2.0.1 /10.2.0.1
Operating System : ANY
This is just for knowledge :
What will be the performance issue if I have more than 1db (for example 10 Dbs.) and I start RMAN backups of all Dbs simultaneously and only the default channel to disk is being used ?
If there is any performance issue i.e. slowdown, what will be the best remedy for that and how ?
Please guide
Thanks & Regards NeerajHi,
Please take a look on this links:
- http://blogs.sun.com/glennf/entry/parallelizing_oracle_backup_with_rman
- [Advise On How To Improve Rman Performance - Note:579158.1|https://metalink.oracle.com/metalink/plsql/f?p=130:14:725432850963062762::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,579158.1,1,1,1,helvetica]
- [RMAN Performance Tuning Diagnostics - Note:311068.1|https://metalink.oracle.com/metalink/plsql/f?p=130:14:725432850963062762::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,311068.1,1,1,1,helvetica]
- [Known RMAN Performance Problems - Note:247611.1|https://metalink.oracle.com/metalink/plsql/f?p=130:14:725432850963062762::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,247611.1,1,1,1,helvetica]
Do you have access to Metalink?
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com
Edited by: F. Munoz Alvarez on Sep 17, 2008 9:43 PM -
How can i do a RMAN backup of my database from the network ?
i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus -
Can not recover table from rman backup
For testing I want to recover deleted table from rman backup.
I have make vm of oracle 11g. the following step i have applied but could not recover the table.
rman> backup database ;
On sqlplus create login as scott/tiger
create table scott.emp1(col1 varchar2(10));
insert into emp1(col1) value('Yasir ') ;
commit ;
select * from emp1 ;
it shows me one row successfully.
Now i have login the sys as sysdba
sqlplus> alter system switch logfile ;
after this i have drop the table .
Now to recover the table i have restored database on same vm.
rman>restore database ;
rman> recover database ;
rman> alter database open ;
on sqlplus i have issued
sqlplus> select * from scott.emp1 ;
table or view does not exist.
any help how to recover the deleted table from rman backupHi,
Check this test case
SQL> create table TEST2 as select * from emp;
Table created.
SQL> select count(*) from TEST2;
COUNT(*)
15
SQL> select TO_CHAR(SYSDATE,'DD-MON-YYYY HH24:MI:SS') from dual;
TO_CHAR(SYSDATE,'DD-
10-SEP-2013 10:57:05
SQL> alter system switch logfile;
System altered.
SQL> drop table TEST2 purge;
Table dropped.
SQL> shu immediate
[oracle@vnode MYSHELL]$ rman target /
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 10 10:58:39 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DDTEST (DBID=1667776968, not open)
RMAN> run{
set until time "to_date('2013 Sep 10 10:57','yyyy mon dd hh24:mi')";
restore database;
recover database;
alter database open resetlogs;
}2> 3> 4> 5> 6>
media recovery complete, elapsed time: 00:00:02
Finished recover at 10-SEP-13
database opened
RMAN> exit
SQL> set lin 200 pages 100
SQL> select count(*) from test2;
COUNT(*)
15
HTH -
Unable to restore and recover my Database from RMAN Backup
Dear All,
Iam practicing RMAN in Windows environment.
My configurations are
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION ON; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:\Backup\%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'E:\ORACLE\DATABASE\SNCFORCL.ORA';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'F:\Backup\%U.bak';
Then i took the RMAN backup, now iam shutdown my DB and removed one logfile..
then i tried to startup the DB but it is saying
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: 'E:\ORADATA\ORCL\REDO03.LOG'
So i tried to restore the Database with my rman backup
RMAN> restore database;
But i am unable to restore my logfile in the Datafiles location where as all other datafiles are restored but redo logfiles are not restored.
So, i am unable to recover my DB
Please tell me whether i am doing any mistake, what is the solution for my problem.
Thanks in advance
MahiAll you restored was your datafiles.
Now issue recover database and that will apply the archive logs.
This is in the oracle documentation.
"You must restore backups of these archived logs for recovery to proceed. You can restore either to the default or nondefault location. If you do not have backups, then you must performing incomplete recovery up to an SCN before the first missing redo log and open RESETLOGS."
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/osrecvry.htm
In this case after issuing restore database in RMAN, then issue this.
"Recover database"
It will then be an incomplete recovery. They should have been multiplexed. Did you restore your controlfile with this backup? You may have to issue an "Alter database open resetlogs;" -
Create a new Database in an other server using a copie of RMAN backup
Hi all,
I want to create an other instance for our production database. We have disk and tape in rman backup. My question is can i create a new database using our disk backup in an other server?
If some procedure or steps is there, email it to my adresse [email protected]
Hamid.
ThanksBy means of the use of Recovery Manager it is possible to duplicate a database out from a previously taken rman backup. The method will be outlined in the next few lines.
Let's assume a source database named SRCDB and the target database, named GEMINI. A unix like environment is assumed, but it can be implemented on windows as well, just beware of the particular Oracle implementation on a windows platform (orapwd file name, service creation, path format)
1. Create a password file for the Cloned (GEMINI) instance:
orapwd file=/u01/app/oracle/product/9.2.0.1.0/dbs/orapwGEMINI password=password entries=10
2. Configure tnsnames.ora and listner.ora
Properly identify the database at the tnsnames.ora and have the instance manually registered against the listener.ora files, both files located at the $ORACLE_HOME/network/admin directory.
2.a Manually register the database against the listener (listener.ora)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/9.2.0.1.0)
(SID_NAME = GEMINI)
2.b Added the target GEMINI to the tnsnames.ora
GEMINI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost.mydomain.com)(PORT = 1521))
(CONNECT_DATA =
(ORACLE_SID = GEMINI)
2.c Reload the listener
lsnrctl reload
3. Create a new init.ora for the cloned database.
Next create an init.ora file for the cloned database. In case the same paths cannot be used on the target host, either because it is the same source host or because those paths are not reproducible on the target, then DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT may be required to be defined
DB_NAME=GEMINI
CONTROL_FILES=(/u02/oradata/GEMINI/control01.ctl,
/u02/oradata/GEMINI/control02.ctl,
/u02/oradata/GEMINI/control03.ctl)
# Convert file names to allow for different directory structure.
DB_FILE_NAME_CONVERT=(/u02/oradata/SRCDB/,/u02/oradata/GEMINI/)
LOG_FILE_NAME_CONVERT=(/u01/oradata/SRCDB/,/u01/oradata/GEMINI/)
# block_size and compatible parameters must match those of the source database
DB_BLOCK_SIZE=8192
COMPATIBLE=9.2.0.0.0
4. Connect to the cloned instance
ORACLE_SID=GEMINI; export ORACLE_SID
sqlplus /nolog
conn / as sysdba
5. Create an SPFILE based on the init.ora
CREATE SPFILE FROM PFILE='/u01/app/oracle/admin/GEMINI/pfile/init.ora';
6. Start the database in NOMOUNT mode:
STARTUP FORCE NOMOUNT;
7. Connect to the TARGET, CATALOG and AUXILIARY databases.
By means of the rman three connections are open, one for the Source Database (SOURCEDB), another for the Catalog database (RCAT), and one more for the cloned database (GEMINI)
ORACLE_SID=GEMINI; export ORACLE_SID
rman TARGET sys/password@SRCDB CATALOG rman/rman@RCAT AUXILIARY /
8. Complete or Incomplete clone (recover)
From the rman the database using one of the following commands:
8.a Clone the database by means of a complete recover.
DUPLICATE TARGET DATABASE TO GEMINI;
8.b Clone the database up to a defined point in time in the past by means of an incomplete recover
DUPLICATE TARGET DATABASE TO GEMINI UNTIL TIME 'SYSDATE-2';
9. Process finished.
Once the process is finished, the newly created GEMINI database is ready to be used as an independent new cloned database.
Ref. RMAN Clone a Database
~ Madrid -
I am getting below error while taking RMAN backup.
Friends,
I am getting below error while taking RMAN backup.
The issue is related with a lock while trying to backup the controlfile.
The lock is more likely caused by the autobackup controlfile process started just before RMAN process was also trying the backup controlfile as shown in the following alert.log excerpt.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Is there anyway to solve this issue?Thanks in advance.Hi,
SQL> SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
FROM v$session s, v$enqueue_lock l
WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2; 2 3
no rows selected
Oracle version : 10.2.0.3
I am getting this error once in a month not everyday.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Please suggest me based on this..Thanks in advance.. -
Creating a new controlfile with datafiles in RMAN backup
Hi,
i am using oracle 10g (10.2.0.1) in RHEL5 server. i am trying to restore a RMAN backup from one server to another new server with new db name. i have taken out the spfile from RMAN autobackup and created pfile from it and edited the pfile with new dbname and directory structure and started the db in nomount with the new pfile. Now i have restored the controfile from the RMAN autobackup tried to put the database in mount state. But it failed due to the below error
RMAN-03002: failure of alter db command at 11/05/2012 21:44:56
ORA-01103: database name 'ORADB' in control file is not 'DEVDB'
Hence i shutdown the database and started the db in nomount with new pfile and tried to create the controlfile with the new db name,but it failed as it is looking for the datafiles.
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/u01/app/oracle/oradata/DEVDB/datafile/o1_mf_system_80jq0kfw_.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
All my datafiles reside in my RMAN backup. How to get the datafiles from RMAN backup in the above scenario??
Regards,
007Hello;
The location and filename and DBIS will be different, but you need something like this :
$ORACLE_HOME/bin/rman << EOF
CONNECT TARGET /
STARTUP NOMOUNT;
SET DBID 3754763357; #DBID of PROD database
RUN
ALLOCATE CHANNEL c1 DEVICE TYPE disk format '/u01/oradata/backups';
RESTORE CONTROLFILE FROM '/u01/oradata/backups/sb_t790762003_s85_p1';
ALTER DATABASE MOUNT;
SET NEWNAME FOR DATAFILE 1 TO '/u01/app/oracle/oradata/CLONE/system01.dbf';
SET NEWNAME FOR TEMPFILE 1 TO '/u01/app/oracle/oradata/CLONE/temp01.dbf';
RESTORE DATABASE;
SWITCH DATAFILE ALL;
RECOVER DATABASE;
release channel c1;
ALTER DATABASE OPEN RESETLOGS; So you need "SET NEWNAME" for all your files
Full Example
http://www.visi.com/~mseberg/rman/restore_database_without_catalog.html
Best Regards
mseberg -
Setting up new dbname/sid while creating oracle db from rman backups in 11g
Hi all,
I have rman backups and need to create another database from rman backups with different name... but it is unsuccessful..
created instance with new db...
running create new db connecting rman auxiliary sys/password@newdb
run {
SET NEWNAME FOR DATAFILE 1 TO 'F:\app\HOME\oradata\clonedb1\SYSTEM01.DBF';
SET NEWNAME FOR DATAFILE 2 TO 'F:\app\HOME\oradata\clonedb1\SYSAUX01.DBF';
SET NEWNAME FOR DATAFILE 3 TO 'F:\app\HOME\oradata\clonedb1\UNDOTBS01.DBF';
SET NEWNAME FOR DATAFILE 4 TO 'F:\app\HOME\oradata\clonedb1\USERS01.DBF';
SET NEWNAME FOR DATAFILE 5 TO 'F:\app\HOME\oradata\clonedb1\EXAMPLE01.DBF';
SET NEWNAME FOR TEMPFILE 1 TO 'F:\app\HOME\oradata\clonedb1\TEMP01.DBF';
DUPLICATE DATABASE TO clonedb
pfile 'D:\TESTDELETE\initclonedb1.ora'
BACKUP LOCATION 'F:\app\HOME\flash_recovery_area\orcl\'
LOGFILE GROUP 1 ('F:\APP\HOME\ORADATA\ORCL\REDO01.LOG') SIZE 60M REUSE,
GROUP 2 ('F:\APP\HOME\ORADATA\ORCL\REDO02.LOG.rdo') SIZE 60M REUSE,
GROUP 3 ('F:\APP\HOME\ORADATA\ORCL\REDO03.LOG') SIZE 60M REUSE;
Error it shown is in rman backup creation is as follows
<part>>
sql statement: alter system set db_name = ''ORCL'' comment= ''Modified by RMAN
duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 640286720 bytes
Fixed Size 1376492 bytes
Variable Size 314576660 bytes
Database Buffers 318767104 bytes
Redo Buffers 5566464 bytes
Starting restore at 20-DEC-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=133 device type=DISK
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:07
output file name=F:\APP\HOME\ORADATA\CLONEDB1\CONTROL01.CTL
output file name=F:\APP\HOME\FLASH_RECOVERY_AREA\CLONEDB1\CONTROL02.CTL
Finished restore at 20-DEC-11
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/20/2011 07:07:11
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01102: cannot mount databa
se in EXCLUSIVE mode
RMAN> EXIT
how can i prevent rman setting db_name=orcl which is already exists in the db.. i need to create db from rman backups with different dbname...
whould someone help me out, how can i create database from another database rman backups with different dbname/sid on same host..
My pfile has new db_name , but while db creation rman setting to db_name to source dbname.. it should be new db name that i want create with new db name...
is there any RMAN command to specify new DB name it should set while running
sql statement: alter system set db_name = newdbname -- as part rman script execution...
it appears to be i should not touch the soruce db.. i have access to only source db rman backups and need to create another db with different dbname/sid.. please do help...When you performing RMAN duplicate why you making your script so complicated?
Your instance name and DB name can be different, But what is the contents in your pfile "D:\TESTDELETE\initclonedb1.ora" ? please do post
Have you started any other services related to ORACLE? check in start --> run --> services.msc any other active oracles services, Make sure you have clonedb1.
Startup in nomount
check the connectivity to target server.
SET NEWNAME FOR TEMPFILE 1 TO 'F:\app\HOME\oradata\clonedb1\TEMP01.DBF';Why you mentioning SET NEWNAME FOR DATAFILE ? You have option of db_file_name_convert/log_file_name_convert in case if your file system different in Target & auxiliary.
BACKUP LOCATION 'F:\app\HOME\flash_recovery_area\orcl\'When you have backup in same location why you are mentioning this clause?
First run duplicate from auxiliary server as
rman target sys/*****@prod auxiliary /
RMAN> duplicate target database to "db_name";
Am not sure what you are trying to do. is it 11gR1 or 11gR2?
You have option of duplicate from active database without having backup also..
here some links please check it.
http://docs.oracle.com/cd/E14072_01/backup.112/e10642/rcmdupdb.htm#BGBFDJHB
RMAN 11GR2 : DUPLICATE WITHOUT CONNECTING TO TARGET DATABASE [ID 874352.1]
knowledgespring
Newbie
Handle: knowledgespring
Status Level: Newbie (10)
Registered: Dec 26, 2007
Total Posts: 243
Total Questions: 77 (75 unresolved)
So sad that forum was able to help only in two answers out of your 77 questions :(
Edited by: CKPT on Dec 21, 2011 5:12 PM -
Error , ORA-19809 & ORA-19804 While restoring RMAN backup .
Hi Experts,
I am restoring production RMAN backup to UAT . Using below steps
1)rman target=/
2)RMAN> startup nomount;
3) RMAN> restore controlfile from '/orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl';
Starting restore at 05-AUG-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=3 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATA_ACME/acme/controlfile/current.256.724845209
output file name=+DATA_ACME/acme/controlfile/current.257.724845209
Finished restore at 05-AUG-10
4) RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
5) RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME1/current/%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
new RMAN configuration parameters are successfully stored
6) RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
7) RMAN> CATALOG START WITH '/orabkdump/Rman_Bak/ACME';
searching for all files that match the pattern /orabkdump/Rman_Bak/ACME
List of Files Unknown to the Database
=====================================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
List of Files Which Where Not Cataloged
=======================================
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
RMAN-07517: Reason: The file header is corrupted
8) RMAN> run {
2> set until sequence 1789 thread 2;
3> restore database;
4> recover database;
5> sql 'alter database open resetlogs';
6> }
executing command: SET until clause
Starting restore at 06-AUG-10
using channel ORA_DISK_1
Finished restore at 06-AUG-10
Starting recover at 06-AUG-10
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2803
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=6051
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2804
channel ORA_DISK_1: reading from backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/06/2010 23:10:38
ORA-19870: error while restoring backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 49283072 bytes disk space from 5218762752 limit
** My UAT database should be in noarchival mode . Generally such errors have been observed during backup , but have no clue why they occurred during recovery .Please advice .
Thanks
Edited by: user11981514 on Aug 6, 2010 9:46 AMHi,
Since the error ORA-19809 indicates the lack of space in flash recovery area during the media recovery, I suggested increasing the value of the parameter DB_RECOVERY_FILE_DEST_SIZE.
Yes, during the media recovery the RMAN will restore the archived log to the default destination (only if the required archived logs are not already on the disks).You can confirm the restore location of the archived log in RMAN restore log/destination specified by parameters log_archive_dest_1/db_recovery_file_dest.
Regards,
Vaibhav -
Restore spfile from rman backup ---- error.
Hi,
I am trying to execute recovery on new machine ...
I have done the following steps..
I have one database as ora10g2 as peroduction database on one machine as hosta
I have created a catalog on another machine cora10g2 (hostb)
I have taken a full backup from hosta as per following ...
the following command execute from hosta machine.
$ rman target sys/<passwd>@ora10g2 catalog rman/rman@cora10g2 ...
Backup completed ...
Now I am trying to restore this backup on hostb machine where i have already rman catlog database ..
I have done the following setting ...on host b
set oracle_sid=DUP
and execute following command ...
rman target / catalog rman/rman@cora10g2
RMAN> set dbid 2760732370
executing command: SET DBID
database name is "BAAN10G2" and DBID is 2760732370
RMAN>
RMAN>
RMAN> startup force nomount ;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/oracle/dbs/baan10g2/dbs/initbaan10g2.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 1977112 bytes
Variable Size 67114216 bytes
Database Buffers 83886080 bytes
Redo Buffers 6406144 bytes
RMAN>
RMAN>
RMAN>
RMAN> show all ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rman/backup/control/cntrl_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/baanora3/rman/ora10g2/bkup_db_%d_s%s_P%p_t%t' MAXPIECESIZE 1024;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
RMAN>
RMAN>
RMAN> list backup of spfile ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
2420 Full 7.33M DISK 00:00:01 14-JUN-07
BP Key: 2426 Status: AVAILABLE Compressed: NO Tag: TAG20070614T182935
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070614-00
SPFILE Included: Modification time: 14-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2509 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2515 Status: AVAILABLE Compressed: NO Tag: TAG20070615T130416
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-00
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2694 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2739 Status: AVAILABLE Compressed: NO Tag: TAG20070615T131703
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-01
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2760 Full 80.00K DISK 00:00:01 15-JUN-07
BP Key: 2763 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163437
Piece Name: /rman/spfile/spfile.ora
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2769 Full 7.33M DISK 00:00:02 15-JUN-07
BP Key: 2771 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163441
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-02
SPFILE Included: Modification time: 15-JUN-07
RMAN>
RMAN>
RMAN> restore spfile from autobackup ;
Starting restore at 19-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=35 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=34 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=33 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20070619
channel ORA_DISK_1: looking for autobackup on day: 20070618
channel ORA_DISK_1: looking for autobackup on day: 20070617
channel ORA_DISK_1: looking for autobackup on day: 20070616
channel ORA_DISK_1: looking for autobackup on day: 20070615
channel ORA_DISK_1: looking for autobackup on day: 20070614
channel ORA_DISK_1: looking for autobackup on day: 20070613
channel ORA_DISK_1: no autobackup in 7 days found
channel ORA_DISK_2: looking for autobackup on day: 20070619
channel ORA_DISK_2: looking for autobackup on day: 20070618
channel ORA_DISK_2: looking for autobackup on day: 20070617
channel ORA_DISK_2: looking for autobackup on day: 20070616
channel ORA_DISK_2: looking for autobackup on day: 20070615
channel ORA_DISK_2: looking for autobackup on day: 20070614
channel ORA_DISK_2: looking for autobackup on day: 20070613
channel ORA_DISK_2: no autobackup in 7 days found
channel ORA_DISK_3: looking for autobackup on day: 20070619
channel ORA_DISK_3: looking for autobackup on day: 20070618
channel ORA_DISK_3: looking for autobackup on day: 20070617
channel ORA_DISK_3: looking for autobackup on day: 20070616
channel ORA_DISK_3: looking for autobackup on day: 20070615
channel ORA_DISK_3: looking for autobackup on day: 20070614
channel ORA_DISK_3: looking for autobackup on day: 20070613
channel ORA_DISK_3: no autobackup in 7 days found
channel ORA_DISK_4: looking for autobackup on day: 20070619
channel ORA_DISK_4: looking for autobackup on day: 20070618
channel ORA_DISK_4: looking for autobackup on day: 20070617
channel ORA_DISK_4: looking for autobackup on day: 20070616
channel ORA_DISK_4: looking for autobackup on day: 20070615
channel ORA_DISK_4: looking for autobackup on day: 20070614
channel ORA_DISK_4: looking for autobackup on day: 20070613
channel ORA_DISK_4: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 06/19/2007 18:00:13
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
RMAN>
I am not able to restore spfile from rman backup ;;;Hi,
I would like to know few things
1. How are you setting the db_name ? you can set db_id at RMAN, how are you setting the db_name ?
2. Do you have any default init file at default location ? if yes, is the db_name parameter set correctly in that file ?
Since spfile is yet to be restored, you must set the db_name parameter correctly before you start spfile restore.This can be done with init file at default location which can even contain just one paremeter i.e db_name. -
How to find out when last rman backup was made in 9i
Hello,
i have an oracle 9i database running on windows here. Is there a way to find out when the last rman backup was done with a sql query?
I would like to create a job inside the database that regulary checks if a rman backup ran sucessfully instead of using scripts in the operating system.
But i only know about commands in the rman utility (that i can not execute as a job, right?) - is something similar possible with for example sqlplus?Hello,
this gives some results, but none of the views begins with RC:
ALL_DIM_HIERARCHIES
ALL_SOURCE
ALL_SOURCE_TABLES
ALL_SOURCE_TAB_COLUMNS
DBA_DIM_HIERARCHIES
DBA_RCHILD
DBA_REGISTRY_HIERARCHY
DBA_RSRC_CONSUMER_GROUPS
DBA_RSRC_CONSUMER_GROUP_PRIVS
DBA_RSRC_MANAGER_SYSTEM_PRIVS
DBA_RSRC_PLANS
DBA_RSRC_PLAN_DIRECTIVES
DBA_SOURCE
DBA_SOURCE_TABLES
DBA_SOURCE_TAB_COLUMNS
USER_DIM_HIERARCHIES
USER_RESOURCE_LIMITS
USER_RSRC_CONSUMER_GROUP_PRIVS
USER_RSRC_MANAGER_SYSTEM_PRIVS
USER_SOURCE
Edited by: user590072 on 22.06.2010 05:49
Maybe you are looking for
-
Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore. When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD". Anyone else have this issue after they u
-
Photoshop Album Starter Ed 3.0
I need an unlocking code for Photoshop Album Starter Edition 3.0
-
EXEC SQL Error: ORA-01401: Inserted value too large for column
Getting this SQL Error: ORA-01401: Inserted value too large for column..on an EXEC SQL Insert statement when writing to an external Oracle DB from SAP. On further analysis..it appears that this happens to the fields..when the string length matches th
-
Portal adds "=" in URL jump
Dear forumers, I'm facing a strange problem, i'm not able to resolve: When defining a jump on a BI query to a document placed in the content server, the jump doesn't work. After analyzing the problem, i found out that the portal adds an "=" (=equal
-
Addition of discount % if Material received after delivery date
Hi, I have a requirement, in PO we add the delivery date now user want to if material received after the delivery date then 2% discount to be added on the base value of material, Can we configur this in system. regards, zafar