Tuning technical application Essbase bso
Hello;
I have slow load and procedures in one of my bso Essbase applications. The other applications work fine.
I wonder if there are any technical level process that allows me to improve performance.
What is it that makes Optimize and Restructure Outline Essbase level.?
What should you keep in mind to increase the cache Essbase database?
I have clear that it can also be necessary to perform a structure-level tuning and optimizing load scripts but this is done by a functional area.
Thank you very much.
regards
Rodrigo
I renamed the .pag, .ind, .esm files. But the application still doesnt start. I get this error in EAS console
error: 1054001 Cannot load application appname with error number [1052003] - see server log file
The server log file also says
error: 1054001 Cannot load application appname with error number [1052003] - see server log file
I also took the .otl file from the same backup and dropped it in database folder but the application is still not coming up
Similar Messages
-
EPMA - Essbase BSO application - UDA problem
Hi
we have a shared hierarchy in EPMA which we are using to maintain the Dimensions in the applications.
Among the dimensions that I need in the Essbase BSO application - two of them have specific UDAs assigned to them. (two for each member in these dimensions - UDAs can be common between the dimensions)
Dimension_A
--Member_A1 (UDAx, UDAy)
--Member_A2 (UDAp,UDAq)
Dimension_B
--Member_B1 (UDAx, UDAy)
--Member_B2 (UDAp, UDAq)
UDA
--UDAx
--UDAy
--UDAp
--UDAq
But when I deploy the application I am only seeing one UDA getting updated into the Essbase Outline (am checking via EAS)
Dimension_A
--Member_A1 (UDAx)
--Member_A2 (UDAp)
Dimension_B
--Member_B1 (UDAx)
--Member_B2 (UDAp)
I don't know why it is not updating the outline correctly - can anybody suggest what the problem might be ?
I have tried redeploying multiple times / deleting the dimensions adding them again / even deployed a new application from scratch - no luck.
Regards
AnkurI tried even in another environment - had the UDA dimension from the Shared Library - and another local dimension.
Just added multiple UDAs to the same member of the Local dimension and deployed the application - but in the Essbase application it only updated the first UDA that I had assigned to these members.
For e.g. I added 3 UDAs to
MemberX : Check1, Check2 & Check 3
MemberY : Check3, Check1 & Check 2
But it only updated the first UDA in each
MemberX : Check1
MemberY : Check3
Is there any setting that I am missing ? in EPMA or in Essbase.
Not sure about EPMA but I don't remember any setting that we need to configure in Essbase for multiple UDAs (it always accepts multiple UDAs)
Regards
Ankur -
Cannot Delete / Validate / Deploy Essbase (BSO) application [EPMA]
Hi All,
I deployed a Essbase BSO application from EPMA (11.1.2.1) and got a successful result. I have made a minor change and want to deploy the application again but all the options for Duplicate / Delete / Validate / Deploy / Compare are disabled.
I have tried this on two separate instances with the same result.
- I have restarted the services already.I also ensured that no ESSSVR service was running when I had shutdown all the services.
- I have also checked the timeout period to ensure that it is not a timeout issue.
Does anyone have any clue as to why this might be happening. I was given a suggestion that the Relational Schema for EPMA might have certain flags that may be blocking this. Any ideas on which tables / columns I should look at?
ShehzadFirst check the application diagnostics to see if anyting is amiss. Go to Application Library, right-click on the application and selecxt "Diagnostics".
Run all the diagnostics. If a diagnostic test fails, Performance Management Architecxt provides an automated solution or manual steps to resolve the problem. Your security role must be EPMA Administrator to run them. Which also makes me think that it's possible that your security has been changed so you no longer have access to the app. Has someone changed your security? Did you create the app under a different ID? -
Hello
In my organization, we have one essbase BSO application. For some reason, the data in it got wrong and we have to restore the data from file system backup. We created a new temporary essbase application and copied the .otl from the existing application using EAS console. The outline opens in the new temporary application. Then I stopped the application and and copied .pag , .ind, .esm and .tct files from file system backup to this application folder but the application does not start. What could be the reason? and can anything be done about it.
ThanksI renamed the .pag, .ind, .esm files. But the application still doesnt start. I get this error in EAS console
error: 1054001 Cannot load application appname with error number [1052003] - see server log file
The server log file also says
error: 1054001 Cannot load application appname with error number [1052003] - see server log file
I also took the .otl file from the same backup and dropped it in database folder but the application is still not coming up -
EPMA Essbase BSO cube with text measures
Hi everybody ,
I am using Oracle EPM 11.1.2.2
I am trying to deploy a essbase BSO cube with text measures from EPMA. In EPMA the text list has to be created as a smartlist dimension. I have even kept the Account member with data type as Text as the first level 0 member of the Account hierarchy.
When I am deploying am gettting no error . In EAS when I see the property of the member it shows as Text and also with the text list attached to it . But When I load data , the data also gets loaded and gives no error.
But when am viewing the data through Smart View or through HFR , the data is displayed as numbers and not as text.
Kindly help .
regards,
SSI can see that it is working with EPMA Essbase too, (nothing wrong there, with EPMA)
Is there any member with a member formula, where you are getting numbers.
If that is the case then text list will not work there. I remember raising a bug for this when text list was introduced for the first time. If that is the case, then you might have to wait till next release (11.1.2.3) where I heard for the first time solve order is coming to BSO (I could be wrong here.)
Regards
Celvin
http://www.orahyplabs.com
Please mark answers as helpful/correct if applicable -
Dear all,
I have an essbase BSO cube. The cube is refreshed from EPMA.
It was working fine. But after making some changes (add members), the deployment was being aborted with the following message.
Error.
Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (XX_MONTHS) .
Caused by: Cannot end stream build. Essbase Error(1007083): Dimension build failed. Error code [1060056]. Check the server log file and the dimension build error file for possible additional info.
Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (XX_MONTHS) .
Caused by: Cannot end stream build. Essbase Error(1007083): Dimension build failed. Error code [1060056]. Check the server log file and the dimension build error file for possible additional info.
\\Error Updating Dimension MA_MONTHS
\\Error Initializing Rule File Information.
Kindly help.
Thanks and Regards,Error 1060056 usually tells you that generation or level with the same name already exists. So check whether you have same member names across/within the dimension.
Regards
Celvin -
EPMA Application Deployment Error (Essbase BSO cube)
Hi,
I am trying to deploy the EPMA application & I am getting the following error:
Success.
\\Record #8797 - Error adding Dynamic calc property to member %_to Sales (3320)
\\Record #8797 - No time dimension defined
Stat Accounts + S T Stat Reps + X T %_to Sales ~ X F E T "\"5500"->\"YearTotal\"/\"Sales\"->\"YearTotal\" ;" % to Sales % to Sales
\\Record #8799 - Error adding Dynamic calc property to member Margin_Inc% (3320)
\\Record #8799 - No time dimension defined
Stat Accounts + S T Stat Reps + X T Margin_Inc% + X A E T "\"Margin\"/ \"Sales\";"
I am trying to tag the account members %_to Sales & Margin_Inc% as TB Average, If I change that property to None, I don't get these errors & everything deploys without any error. Post deployment if I go in the outline & try to assign TB average directly in EAS I am able to do that without any errors.
I am on EPMA 11.1.2.1, this error is not occuring in Planning application but in BSO Essbase cube in EPMA
Any thoughts?
Thanks.Sorry - reread your post and follow that it is an EPMA BSO app, not planning. Can you try placing the Period dimension before the Account dimension in order and seeing if it deploys? I know that's not ideal, but just as a test. You may want to read the very end of this possibly related post:
Re: Essbase Studio - Measures hierarchy
Thanks,
Jon -
1st child of the node in essbase/BSO application script/command
Hello Experts
I was trying to write controlled aggregation via web-form and was wondering if there is any way i can find 1st child of the node for @ANCESTORS function that i would like to use.
e.g. i have product tree node name 100 has 3 children 100_X,100_Y & 100_Z , all 3 children are rows in web-form and i would like to aggregate these product members to the root node using "Controlled" aggregation "@ANCESTORS 100_X" , so long story short i was looking for, if there is any dynamic way i can find out 1st child of the node so that i don't have to hard-code anything level 0 members or UDA's.
Hope my question is clear enough.
Thanks a bunch for your time & input in advance!There is a Custom defined function (CDF) that will do this for you^^^Is this a publicly available CDF? Is it released by Oracle? I took a quick look at http://www.oracle.com/technetwork/indexes/samplecode/essbase-sample-522117.html and
I don't see anything blindingly obvious but I have a peculiar talent for overlooking the blindingly obvious.
Regards,
Cameron Lackpour -
Data issues in Migrating Essbase(BSO and ASO apps)from Server 7 to Server 9
I was able to copy application one is BSO another one is Aso
Both APPS ARE CLEARED IN BATCH FILE.
Budget data excel and flat files is loaded to BSO, calcualation for current year data is done the some for budget files loaded and then calcs are executed.
Then the data for curent year is extracted from bso
then this data all such previus yr and prev exports are loaded to ASO
Then agg is enabled in ASo
All this is done using a batch which call s 10 maxl and which in turn load data and run staggered calcs.
But the issues is Data is not matching after perform these steps in Server 9 at many intersections
Every artifact/var are copied, batch logs are success but still data does not match vs Server 7.
I believe some extra data is generated by Creteblockoneq, createnonmissblock and other calc functions.
I tried copy/Migrate/Manual copy but nothing worked.
Data analysis shows atleast some extra recored are generated after calc in export file
Help needed?Hi
Thanks for the reply.
There are no rejects.
I am exporting level 0 data and loaading it to ASO.
And, the issue includes both points-
1)Extra data points coming in
2)Some intersections data is missing
It is like 80% data is matching
It seems some essbase Calcs calculation way is modified although not sure. -
Essbase BSO data cache setting
can you guys post your BSO cube compressed data size(.pag files) and data cache setting? I am trying to get a better understanding about these two areas interms of optimization. I am also curious to know the maximum data cache setting ever used on BSO cube....(1 GB is what I know as of now)
I think the settings depends on million things (available RAM on server, performance check, etc etc) but just a quick check.
Thanks,
KKIndes and data caches work differently and it is probably good to talk about that. When an Essbase database starts, it will grab all of the memory you have defined for the index cache and nothing else can get at it. Data cachs is grabbed as it is needed until it reaches the maximum. It was truly problematic in the old days when we had much less memory to work with. If you started too many applications, you took all available memory right away. Man I feel old talking about it :)
-
Automate Application & Essbase Backup
Hi Gurus
We have done lots of things on different topics in this forum but one thing which i feel lack is Backup & Recovery Procedures. How can we automate Application & Db Backup for Data forms. Anyone have implemented it or have some clue then pls let it share on this forum.
Thanks in advance
SNKFor the planning application then I would take a backup of the schema/db, this can be automated and done by your dba.
For essbase then different backup options are outlined in :- http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_backup_recovery/launch.html
It all depends on your backup method to how it would be automated.
Cheers
John
http://john-goodwin.blogspot.com/ -
EPMA- ESSBASE BSO app Validation error
Dear's,
I have created a BSO app with epma shared library and while Validating application i am getting below error.
Error : Member 'D-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'W-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'M-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'Q-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'P-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'S-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'Y-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Error : Member 'H-T-D' under parent 'Period' in dimension 'Period' is a leaf level member with a DataStorage value of 'DynamicCalcAndStore'. A MemberFormula value is required for this member.
Please any inputs appreciated.
Thanks,
~KK~Have you tried changing the Data Storage type or entering a formula as the error suggests?
Cheers
John
http://john-goodwin.blogspot.com/ -
Essbase BSO Performance Tunning
Hi Team,
Actually i have one planning application (11.1.2.2) and the performance is very slow for the aggregation it is taking almost 2 hours . I have done as per the hour glass model but it didnt helped.
Any suggestions
Cube 1
Dense
01.Account - 743 , 02.Period - 19
Sparse
03.Scenario - 4 ,04.Currency -5
05.Version -5 , 06.Cust Dim1 -12
07.Years - 11 , 08.Cust Dim2-152
09.cust Dim3-212 , 10.cust Dim4-288
11.cust Dim5-318 , 12.Entity -421
13.Cust Dim7-598
Cube 2 -
Dense
01.Account - 15 , 02.Period - 19
Sparse
03.Scenario - 4 ,04.Currency -5
05.Version -5 , 06.Cust Dim1 -12
07.Years - 11 , 08.Cust Dim2-152
09.cust Dim3-157 , 10.cust Dim4-212
11.cust Dim5-318 , 12.Entity -598
13.Cust Dim7-9692
Thanks in advance.You could try the "Hour Glass In the Stick".
It's similar to Hour Glass, but the non-aggregate dimensions stay at the bottom of the dimensions.
So, let's say version and scenario are non-aggregate dimensions (almost sure), you could try this configuration:
Cube 1
Dense
01.Account - 743 ,
02.Period - 19
Sparse
03.Currency -5
04.Cust Dim1 -12
05.Years - 11 ,
06.Cust Dim2-152
07.cust Dim3-212 ,
08.cust Dim4-288
09.cust Dim5-318 ,
12.Entity -421
11.Cust Dim7-598
12.Scenario - 4 ,
13.Version -5 ,
Cube 2 -
Dense
01.Account - 15 ,
02.Period - 19
Sparse
03.Currency -5,
04.Cust Dim1 -12
05.Years - 11 ,
06.Cust Dim2-152
07.cust Dim3-157 ,
08.cust Dim4-212
09.cust Dim5-318 ,
12.Entity -598
11.Cust Dim7-9692
12.Scenario - 4 ,
13.Version -5
I think "years" could be a non-aggregate dimension too, so put 11. Scenario, 12.Version, 13.Years it's another idea.
From my experience, i think scenario should become dense and then be the 3 ^rd^ dimention.
Even though, i do think you already have tried this.
Other idea, some applications we have performance issues start to calculate faster if we restructure the database. In our case, the client don't use the Planning during the night, so we have a some time for restructuring every night.
Edited by: WesleyRY on 19/02/2013 10:10 -
Essbase trigger error : Application shuts down
Hi,
I am implementing a trigger in Essbase BSO application. Trigger is as below
CREATE OR REPLACE TRIGGER 'SPMTEST'.'SPMTEST'.'SPMONUPD'
WHERE (Jan,[2010], Sales, Actual, [100-10], [New York])
WHEN Jan > 20 and Jan < 25 THEN SPOOL EssSPM
WHEN Jan > 30 THEN SPOOL ESSSPMTEST
END
But when I lock send value from excel to the above intersection, its gives me error as
Network Error [10054] : cannot receive data.
also in the application log it logs following,
[Thu Jul 15 17:10:15 2010]Local/SPMTEST/SPMTEST/admin/Info(1020082)
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
[Thu Jul 15 17:10:17 2010]Local/SPMTEST/SPMTEST/admin/Info(1008106)
Exception error log [D:\Hyperion\logs\essbase\app\SPMTEST\SPMTEST\log00012.xcp] is being created...
[Thu Jul 15 17:10:18 2010]Local/SPMTEST/SPMTEST/admin/Info(1008107)
Exception error log completed D:\Hyperion\logs\essbase\app\SPMTEST\SPMTEST\log00012.xcp please contact technical support and provide them with this file
[Thu Jul 15 17:10:18 2010]Local/SPMTEST///Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
Has anyone got with above scenario. Kindly help to resolve problem.
Email : [email protected]
Thanks and Regards
Shyamkant
Edited by: user11292324 on Jul 15, 2010 4:56 AMThis is my VI, i use a "simulate signal" to generate my sine signal. I used other waveform generators but i keep having the same prob. When i use digital i/o or analog dc out, i have no probs.
Attachments:
AC uit sinus.vi 113 KB -
Essbase Application Restore Issue.
Hi All,
I am trying to copy an Essbase Application from a distant install. I have been provided the contents of the 'app' directory of the remote server. After copying to my Essbase server instance 'app' directory, I am trying to restore by creating a new application in EAS with the same name. But I get the below error:
*Error: 1002097 Unable to load database [PFTAPRFT].*
This application has 20 DBs. If I remove the PFTAPRFT folder from the app directory, it gives the same error on another database. All this while I try to create the application as BSO. But when I try to create the same using ASO option, I get a different error as below:
*Error: 1002112 Unable to convert outline [D:\EPMhome11G\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\ACCPROFT\PFTAPRFT\PFTAPRFT.otl], verification failed*
I also tried not to place these applications in the 'app' directory and manually create the application, outline and load data using files, but that cube did not show any measures and was showing all values as '#MISSING'.
Can some one please point me on what I am missing here to able to move the application successfully from one Env to another ?
-Sandeep.why dont you check with your server team(windows/unix) to revert it back as your applications are getting effected & ask them to first apply on Dev/QA servers and then test, if everything is ok, then move it to Prod.
Are you sure that before restore you always change the app/db settings(uncheck allow users to start,etc) and stop the application, then try to restore full application or only DB also fine as you are not going to change anything on app files.....
Maybe you are looking for
-
Export list to SAP memory.
Hello experts, I'm trying to excute the following sample: http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html I replaced the program in the SUBMIT STATEMENT with the name of my program which displays the reportt in an ALV format. But my code giv
-
How to configure security groups creation in OID through LDAP sync
Hello, I am on OIM 11.1.2.1.0. I created a new role and assigned the role to a user. The user was added to the corresponding group in OID. This was the result I observed: Role created in OIM: PIPELINE-18010-DEC~LEAVIERWER There is a corresponding g
-
XML News content modification problem in Portal application
Hi, We are trying to update the xml news content in Portal application with KM API. We are getting following exception while updating the content. javax.xml.transform.TransformerException: Namespace fixup failed. Prefix 'xsi' used in attribute 'xsi:n
-
Similar to BUPA_ROLES_GET_2
Hi All! Do you know a FM which is similar but more reliable than BUPA_ROLES_GET_2. Regards sas
-
Wierd problem with video playback getting corrupted
I have a "week 38" iPod Touch 16 that didn't exhibit any negative black issues or other problems. But ever since I did the 1.1.1 update I sometimes get weird psychedelic colors in the dark areas of the video playback (iTunes purchases or YouTube). A