Tunning signature- set number of destination ip addresses

Any way to set IDS signature to fire only if same source address scanning more then say 50 different destinations in given time like 10 minute?

I guess you can do this using the 'custom signature' wizad using the IDM. I do not remember the available options, but you might see there once you get there.

Similar Messages

TS1629 Apple destination ip addresses for well known TCP and UDP ports used by Apple software products

I work for a large enterprise organisation with dual layer firewalls. The Apple article titled "allowing well known ports through the firewall "does not provide enough information on what the destination ip addresses of Apple servers are which host Apple ICloud services.
Does anyone have information on the destination Apple Ip addresses? So that I can lock down my firewall rules, just so that Apple devices, access Apple services on the Internet.
Many thanks

One option is to use "connection-reuse" cli under sip-ua configuration mode.
sip-ua
connection-reuse
This will enable the 7200 to create a connection with source and destination udp port number set to 5060. This feature is available in IOS 12.4(25d) which requires minimum of 256 / 512MB DRAM (depends on the feature set) and flash of 48 MB.

I created an Apple ID for my daughter with her own gmail address, but I want her Apple ID and primary email address to be an iCloud email address. How can I do this? I can't set up an icould email address for her without first creating an Apple ID?

I have created an Apple ID for my daughter with her own gmail address as the primary email address, but I want her Apple ID and primary email address to be an iCloud email address. How can I do this? I can't set up an icould email address for her without first creating an Apple ID right?
I'm not good with computers so please explain in simple way...:)
I also wonder what the best way is to set up accounts for children in a family. I dont want them to be able to purchase apps etc through the parents accounts, also some things we like to share as a family and others we don't want to share. Is there any good. clear, simple explanation from Apple Support about these issues? Or best to go to Apple store and go to genius bar or one to one advise?
thanks

You can set up an iCloud account which makes the iCloud email address you choose the Apple ID and thus the login for it:
https://discussions.apple.com/message/22283348#22283348
though I have to say I think it's more sensible if the ID is another address, both for security reasons (so people don't know what the login is) and as a contact address from Apple if the account were to stop working and they needed to contact you. So personally I would to to System Preferences, enter the GMail address which is an ID, and then choose a nerw @icloud.com address.
If she has her own iCloud account she will need either her own computer or her own user account on your Mac to be able to make use of it. You should note that under Apple's terms of use Apple IDs are only available to children of 13 and over.
As to purchasing apps, this is nothing to do with iCloud: it's iTunes, and the login can be different. So you can all sign into the same iTunes account but have different iCloud accounts. Or she can have her own iTunes account if she is of suitable age (credit card needed for purchasing apps).
If you have other children you should be aware that any one Mac or device can create only three iCloud accounts - this is tied to the serial number, not the user account, and once reached cannot be bypassed. You can of course sign into an iCloud account created on another device.

Setting the TFTP destination for RME Archive Sync

Hi,
We are attempting to do an Archive Sync from RME in LMS 3.2.
LMS is installed on a Solaris device with multiple VNICs (let's define VNIC1 IP as 1.1.1.1 and VNIC2 IP as 10.0.0.1). The network which has managed devices on it is connected to NIC 2 in the 10.0.0.0 range. We use VNIC 1 to access LMS. There is no routing between 1.1.1.1 and 10.0.0.0.
Now, I understand that when RME attempts to sync a switch, it starts and SSH session into the device and triggers a "copy flash: tftp:" command. This is apparent from the debug logs from RME.
These TFTP based retrievals are failing because RME is setting the TFTP destination to the IP from VNIC 1 (in our case, to 1.1.1.1). Is there any way to force RME to use another IP address for the TFTP destination?
Thank you.
- JMS

you should be able to workaround this by going to
RME > Administration > System Preferences > RME Device Attribute > Add Natted RME IP Address
and enter 10.0.0.1 as the Natted IP address

Why is i tunes gift card not going to email address I sent it to ?

I tunes gift card not going to email address I sent it to. Why ?

Sorry, I must have missed your last response, but can you calrify what feature do you want to use in FormsCentral? There are email receipts and email notifications. If you want the user to receive a copy of the date he entered in the form, then the user needs to enter an email address in the form and submit the form, but if you want the user to receive all responses he and others submit to a form, then it's email notification. It sounds like email receipts in your case. For email receipts to work, you need to have an email field in your form and set up Email Receipts in the options tab, by selecting the email field in the "To:" field.

Wrong Number is dialed from Address Book

Hi all,
i have the following problem on my BBerry pearl 8100:
I have various international numbers saved in the Address Book and they all get dialed wrong (one zero is removed) from Address Book. For example: 003906505152 is the correct number, but dialing from Address Book will get 00396505152 dialed.
Anyone has ideas? Basically I cannot use the Address Book for itnernational numbers because it is useless.
Thanks a lot!

Try setting your options at Call Log > Menu > Smart Dialing correctly. That is usually the source of most international dialing issues.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to track a 4g att iPad stolen? no find my iPhone installed. i have all serial number, imdi, iccdid, ip address...any help?

I have all numbers...Serial number, imei, iccid, ip address. any help. i just got this one replaced and didnt get the chance to set up the locks.

If you did not enable Find My iPad under Settings>iCloud, there is no way to track it.

Running a java program a set number of times

This is a general question. Is it possible to make a java program run only 5 times for the sake of arguement.
Basically I want to write a program that will give the user some flexibility when it will actually run another Java program, but I only want them to be able to say "not now' for a set number of times. When the last time comes the other program will launch. I was initially thinking of the Do Whilw loop, but this needs to work when the program is restarted.
Program starts, it has 5 times it will run before it does something else(doesn't really matter now I think). User takes option "Not Now" and the program ends, but warns the user this will run 4 more times before you will need to do something.
This process will repeat until the user takes the option "Ok install now" or the time limit expires and the install occurs anyway. Can someone point me in the right direction.

ok I see so it's like one those programs that you download for free on the internet and they give you a set amount times to use it before you have to pay for it. but in this case when the number of times you use it equals 5 (or when the user clicks ok) a different java app will open automatically.
My first thought would be to Write a Serialized object to disk using objectOutputStream that stores the number of times the application has been opened. and each time the program runs it checks for the serialized object and then you can do something like what I posted before. of course if were worried about security the user could always look for the object and erase it, if so then I guess we would have to come up with another plan of attack
Hope this helps

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

Any limit to number of secondary ip addresses?

Hi,
Is there any limit to the number of secondary ip addresses on an interface of a router?
I just took over an existing live system.
The previous engineer configured secondary ip addresses on a single physical interface.
Currently, there are 1 main ip address and 2 secondary ip addresses.
I am not allowed to change the existing configuration nor disrupt the existing live system, so I cannot use sub-interface.
When I tried to add 1 more secondary ip addresses, to make it 1 main ip and 3 secondary ip address,
but no matter how I tried, I cannot ping to the end device of this NEW secondary ip address subnet
So I removed one of the existing secondary ip address, I discovered I can ping to the end device of the NEW seconday address!!!
But when I put back the one I removed, I can no longer ping to the end device of the NEW secondary address AGAIN!
I suspect that there is a limit to the number of secondary addresses that can be configured on the physical address.
But, I check the link http://www.cisco.com/en/US/tech/tk365/technologies_q_and_a_item09186a008012d8f7.shtml#q21, it says
Q. What are the maximum number of secondary IP addesses that can be configured on a router interface?
A. There are no limits on configuring secondary IP addresses on a router interface. For more information, refer to Configuring IP Addressing.
I think Cisco could be wrong when saying "There are no limits".
Can someone kindly help me confirm whether there are any limits to the number of secondary ip addresses on an interface of a router?
thank you

Hi,
The main ip and secondary ip addresses are all subnetted into 255.255.255.240.
Main IP 172.16.21.155
Secondary IP#1 = 172.16.21.141
Secondary IP#2 = 172.16.21.93
New Secondary IP#3 = 172.16.21.226
As a test, I simply remove any of the existing secondary ip addresses, and it works!
But when I put back any of the addresses I removed, the new one does not work again.
If it is ture there is no limit, can it be due to other factors like the router hardware?
Pls kindly advice.
Thank you.
Rgds,
Rachel

HT201342 I have set up my iCloud email address on my iPhone and iMac but it does not appear on my iPad. Dies anyone else have the same problem?

I have set up my iCloud email address on my iPhone and iMac but it does not appear in my iPad? Any suggestions?

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team..

How to loop an swf a set number of times?

I need to loop a banner animation a set number of times, then
get it to gotoandstop on a final frame. I know in the past I could
use:
counter++; if (counter<5) { gotoAndPlay (1); }
At least for the looping part (don't even know yet about the
stop pon a particular frame part).
but now in Flash 8 I can't get my test swf to do that using
this statement. Am I missing something? (Of course, obviously I am
or I wouldn't be here!)

This works for me as well, but i don't want it to jump to the
final still frame. i need mine to loop three times, then plan
through to the frame i want, stopping there. the frame i want is
not the final frame in the swf. it is somewhere in the middle.
does that make sense?

Loop though foreach a set number of times

Hi Guys
I want to know how I can loop though a foreach loop a set number of times ? I know in a for loop you can set the max number of loops but I don't know how to do it when comes to a foreach loop. Below is the structure of my foreach loop:
for(Letter letter : letters) {
//I want to loop though only 50 objects max at a time
}

List<Letter> prefix = (letters.size() <= limit) ? letters : letters.subList(0, limit);
for(Letter letter : prefix) {
}

Choose a set number of files in a folder?

Is there a way using AppleScript to choose a set number of files inside a folder?
I've created an Automator workflow to convert some files (Illustrator to PDF) but the folders contain a large number of files (nearly 500). If I ran the workflow on this amount of files I'm pretty sure it would crash, as the workflow opens the files & then saves them in the other format (so it would open all 500 files).
So what the workflow does at the moment is ask me to choose the files to convert, I select around 50 & let it convert them & closes the files. It loops, so once it's completed them I it asks again to choose more files to convert etc...
If I could make it choose a set number of files (via some AppleScript & add this to the workflow) it could open & convert (for example) 50 files, then open & convert the next files. And keep doing this until it completes converting all of them.

red_menace wrote:
What happens to the original item after the conversion? Is it moved, or will some method need to be used to keep track of what has already been converted?/Trim Input Items.action.zip
After the files have been converted they are moved to another folder so that I don't choose them again & again, & so that I know they've been converted.
So if I used the Trim Input Items action it would choose only 9 items, convert them & then (with the workflow looping) convert another 9 files, & so on & so on. Is that correct? If so that could work for me.
The Dispense Items Incrementally action could also work for me. If I understand correctly it would convert 1 file at a time & I'd set to loop so it goes through all the items 1 at a time.
Camelot wrote:
I don't see the need to select a set number of files in the folder.
From your description it sounds like you want to process them all anyway, it's just that your existing (manual-select) workflow works by selecting a few at a time.
What's wrong with the script identifying all files and processing them all in one loop?
Because my workflow (at the moment) opens all the files at once, & then converts them. So it would open nearly 500 Illustrator files in one go rather then opening a few of them, or opening them 1 at a time. I'm pretty sure it would choke my system opening up 500 files (not particularly small files either).

How do I set up a different email address for HPePrint

how do I set up a different email address for HPePrint

@poloacuna
At this time you cannot reassign printer email addresses. Also, keep in mind If you delete a printer email address then you will not be able to use that same email address again for six months.

Tunning signature- set number of destination ip addresses

Similar Messages

Maybe you are looking for