TUP.ini File Error

I have Call Manager and Contact Center and installed both of them. Then i added license but i want to install CAD Client Configuration. I downloaded .exe file in CCX (Tools-->Plug-ins-->Download CAD Client Configuration) but when i open this .exe file, the program gives a error. Error is: "TUP.ini file on the server is missing a critical value for the Call Center Language."
How can i fix this problem?

Hi Ozcan,
I'm not aware of this issue affecting UCCX 8.0 but I can tell you that your current configuration is unsupported.  CCX 8.0 is not compatible with CUCM 6.0.  I would not be surprised at all if this is the root of your issue.  Even if it is not at the root of the issue, this setup will cause you many problems since CCX 8.0 was never designed to work with CUCM 6.0.
The compatibility guide is here:  http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
As far as that particular error is concerned though it sounds like the CAD configuration tool needs to be run again but first the system needs to be set back to a fresh install state (which allows you to go through the setup again and choose the language options).  This can only be done by TAC so I suggest you open a case for that.
TAC will likely not be able to assist with your current configuration though so I advise to upgrade the CUCM to a supported version first.
Thanks
Mike
Be sure to rate this post if the information is helpful.

Similar Messages

  • When creating pdf file am getting [700]** Message Msg700 not in .ini file ** error

    I am new to adobe output server. Am getting " [700]** Message Msg700 not in .ini file **, [397]** Message Msg397 not in .ini file **, [125]** Message Msg125 not in .ini file ** " while creating pdf file. Please help on this issue.

    Is this a new form, or one that was working before ?  Has something changed on the system ?
    Those errors dont really mean anything, so need to understand more around what is happening - a snippet from the log file just prior to the errors to see what is going on ?

  • C:windows\saplogon.ini file error

    Hi Experts,
    I have SAPGUI 7.10 systems and whenever I add new SAP Server in SAP Logon Pad, a corresponding entry is created in C:\WINDOWS\SAPLOGON.INI file.
    But in some system, part of file content is as below:
    Server
    Item1=
    Item2=XXXXX
    Item3=YYYYY
    Item4=AAAAA
    Item5=BBBBB
    where in xxx, yyyy,aaa,bbb are the application server IP.
    But here Item1= <space> as shown.
    For other user systems, item1 corresponds for first entry of logon pad as expected.
    Server
    Item1=XXXXX
    Item2=YYYY
    Item3=AAAA
    Item4=BBBBB
    And I am getting an error if I try at system with item1=<space>.
    Can you tell why this space is inserted on some system and not on others?
    Thanks
    Depesh.

    Hi,
    I am using sapgui 7.10 with patch level 14.
    There is a space shown in all the systems and this creating a problem while executing an SAP shortcut by saying no system description found as it tries to search for a description from saplogon.ini. even if it exists but with a space for item1.
    nobody has manually changed the saplogon.ini file.
    if i manually remove the space then add server list again or i copy the file with no space from somebody system then it works without error.
    But i cannot copy and replace this file if i have 1000+ user working on a solution having their saplogon.ini file with item1=space.
    Kindly suggest some automated process to ensure the space removal.
    thanks
    depesh.

  • Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

    Hello Experts,
    I follow the flightbooking tutorial to create a Material application to get material list. I  can start the agentry server but when I connect to SAP server and get data, I face below issue
    Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
    I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
    My javaBE
    [HOST]
    server=be1.vdc.csc.com
    APPNAME=ZCH_MATERIALLIST
    [CLIENT_NUM]
    CLIENT=800
    [SYSTEM_NUM]
    SYSNUM=01
    [LOGON_METHOD]
    ; USER_AUTH if standard UID/Password authentication is used
    ; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
    ; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
    ;   (load balancing) is used
    LOGON_METHOD=USER_AUTH
    [GLOBAL_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
    ; uses a pool of connections to the SAP backend all utilizing a single
    ;    UID/password
    UID=
    UPASSWORD=
    SHAREDCONNECTION=0
    GET_PERSONNEL_INFO=
    [SERVICE_LOGON]
    ENABLED=true
    UID=hngu3
    UPASSWORD=xxxxxxx
    UPASSWORDENCODED=false
    [GROUP_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GROUP
    ; individual user authentication using an SAP Message Server which distributes
    ; client connections among a "group" of SAP application servers based on load
    ; balancing criteria
    ; host name or IP address of SAP Message Server
    MESSAGE_SERVER=
    GROUP_NAME=
    SYSTEM_ID=
    CLIENT=
    [LANGUAGE]
    LANG=EN
    [LOGGING]
    Level=4
    [REQUIRED_BAPI_WRAPPER]
    com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
    com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
    com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
    com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
    com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
    com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
    com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
    com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
    com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
    com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
    com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
    com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
    com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
    com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
    com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
    com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
    com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

    Hi Tahir, please help me check the log below
    Agentry Runtime Worker Thread###throwExceptionToClient::begin |
    Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
    Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER),  |
    Agentry Runtime Worker Thread###loggedOut::begin |
    Agentry Runtime Worker Thread###HNGU3: SESSION END |
    Agentry Runtime Worker Thread###BAPI::begin |
    Agentry Runtime Worker Thread###create::nulled repository::created new repository |
    Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
    Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

  • Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

    Hi,
    I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
    In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
    During the process, I faced some issue with the output server in printing the labels.
    When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
    The file is move to the error folder and an error file is getting generated which contains the error message as given below:
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
    090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
    2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
    The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
    I also verified the license and it is a valid licence.
    Kindly help me out in solving this issue.
    Thanks
    Senthil

    I assume this is too late to help you, but other might need a hint.  I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
    It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
    Hope this helps anyone....
    Vegard

  • Error in executing transformer.ini file in SSM

    Hi,
    I am working on Hybrid Olap in SSM. I have prepared a transformer.ini file with required sections. I have exported my dimension model to RDBMS. But while executing transformer.ini file i am facing a error where a dialog box appears which says
    ' The library database could not be accessed while trying to report message 7026 ' .
    If anyone know about this errror or face the same error, then please let me know its solution.
    Also does anyone know about what is the exact function of first section of transformer file ie. [windows]
    does and why do we give the path of TBDB file.
    regards
    Himanshu

    Hi Ravi,
    i mapped some of the data fields. Control fields i disabled them....
    Can you giv me wat are the importent fields for Cremas04...
    I did all the field that are indicated in red color..
    still i m getting error
    Message was edited by:
            Pavani Kumari Kokkiragedda

  • Error with ini files & Memory Error

    Hi All,
    I am attaching my VI which is used to save the control values, I am doing it with configuration file, but sometimes what happens my configuration file got erased completely,and my data got lost otherwise saving control values works perfectly fine,  how can I stop this so my configuration data is safe. or is there any other method to save the control values.
    2ndly, I have another error in a different vi which keeps coming (image is attached as "Memory Error"), I tried installing LV and XP again, changed the PC but problem persists.
    Could someone please try to throw some light on these issues.
    Thanks & Regards
    James
    Attachments:
    ini error.PNG ‏24 KB
    Save control values.vi ‏50 KB
    Error2.JPG ‏1 KB

    Your Error2 image is not viewable. Looks like a corrupt upload.
    Your fundamental problem lies in the first part of your code. If the INI file doesn't exist, then when you open it, a new one gets created. There is no SVALUE key, so you are trying to loop 0 times. Since the first for-loop does not execute, the INI file refnum does not get transferred through the tunnel, and subsequent INI file functions receive a null refnum. You need to either wire the refnum outside the loops or use shift registers for the refnum.
    As to your code: OK...
    You must really like whitespace, because that's the only reason I can see for having such a huge while loop that just sits there.
    You really need to learn to draw straight wires.
    You are jumping through unnecessary hoops. You are taking the control values, bundling them into a cluster, converting the cluster into an array, and then autoindexing the array while at the same time setting the "N" terminal of the for-loop. Whew!
    Skip the bundling. Just make an array directly!
    Do not wire both the "N" terminal of a for-loop and autoindex. Do one or the other. Since you have the array, just auto-index.
    The Index Array function is resizable. You do not need to place 2 of them to get the 2 values.
    Your string constants are in 2 places. You should have them in one place only. If you decide to change the names then you need to remember to change them in 2 places.

  • NQS Error: 47077 NQS Config .ini file was not found

    Hi All,
    I just installed OBIEE 11.1.1.7 on my windows 64 bit. And trying to install OBIA 7.9.6.4 on the top of this . While installing I am getting an error :
    NQS Error : 47077 NQS Config.ini file was not found. Make sure your environment is set up properly.
    Pleasw help me out guys.. I am new to this OBIA installation.

    its a BUG
    see this Installing BI Applications 7.9.6.4 on BI EE 11.1.1.7.0 (Doc ID 1561846.1)
    Please down the attached file Technote1561846.1_InstallSecurity.zip and apply the solution.

  • Tecra M7: Can't create Recovery CD: Missing CDDVD.ini - Error loading INI file: RDC_info.ini

    I just recently purchased a Tecra M7, but the system does not come with recovery media, just a Recovery partition and a Recovery Disk creator.
    However, when I try to run the Recovery Disc Creator, it replies with "Error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini".
    I opened this file to try to determine the error, but the contents simply refer to a file named CDDVD.ini. I have looked all over the Hard Drive, even mounted the Recovery Partition, but could not find this file.
    Searching on Google, I found that this file regularly goes missing, and that without it, the recovery media cannot be created. One person reported Tech Support emailing him the file, another was emailed by another user.
    In both cases, the user was immediately able to make the disks. In any case, it seems to be a standard file, referring to "Add_info.ini" (Application and Drivers Disks) and "Rec_info.ini" (OS Recovery Disk), fairly consistent and unchanging through all systems that use this method to build disks.
    Please, could someone email me theirs or post it here so we can all see?
    If/when I receive this file, once I determine it works I will post it here.
    Daniel

    I have talked to Tech Support, and the Tecra M7 w/ XP Tablet Edition does not have Recovery Disks available yet. I was told to check back in a couple of weeks.

  • File Error 8 when saving an ini file in C:\Program Files\ without Admin rights

    I have built my LabVIEW 7.0 Functional Tester software into an application. During install I use a batch file to copy the limits.ini file to the install directory (Usually C:\Program Files\Wellington\ )
    If I log in as administrator (Windows 2k) LabVIEW can write to limits.ini OK. However without Administrator rights LabVIEW can't modify this file (using the Configuration File vi’s) - it returns File Permission Error 8. (It can read the file).
    1. Is there a way around this without manually hacking the registry?
    2. I tend to put my ini files for my LabVIEW software in the same directory as the LabVIEW exe file. Should I be using a different location (eg the \data directory)?
    3. The reason I do not include the *.ini file in the installer is that I can modify it without having to rebuild the app. Instead I get the installer to run a batch file that copies *.ini files from the source directory to the install directory.
    Thanks for your help in advance.
    Nicholas

    Nick wrote:
    > I have built my LabVIEW 7.0 Functional Tester software into an
    > application. During install I use a batch file to copy the limits.ini
    > file to the install directory (Usually C:\Program Files\Wellington\ )
    >
    > If I log in as administrator (Windows 2k) LabVIEW can write to
    > limits.ini OK. However without Administrator rights LabVIEW can't
    > modify this file (using the Configuration File vi’s) - it
    > returns File Permission Error 8. (It can read the file).
    >
    > 1. Is there a way around this without manually hacking the registry?
    Give the particular user write access to that directory.
    > 2. I tend to put my ini files for my LabVIEW software in the same
    > directory as the LabVIEW exe file. Should I be using a different
    > location (eg the
    \data directory)?
    For newer OSes like Unix, and Windows 2k or better yes it would be a
    good idea. Unix typically uses a . file in the home directory
    of the user. Another idea would be to create a known directory inside
    the home directory and put all it's data files there.
    LabVIEW 7.0 has a new VI to return the user data directory.
    > 3. The reason I do not include the *.ini file in the installer is that
    > I can modify it without having to rebuild the app. Instead I get the
    > installer to run a batch file that copies *.ini files from the source
    > directory to the install directory.
    This will only work when you work on the same machine as you developed
    it (or at least the same network).
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Syntax error in NQSConfig.ini.file

    # NQSConfig.INI
    # Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
    # INI file parser rules are:
    # If values are in literals, digits or _, they can be
    # given as such. If values contain characters other than
    # literals, digits or _, values must be given in quotes.
    # Repository Section
    # Repositories are defined as logical repository name - file name
    # pairs. ODBC drivers use logical repository name defined in this
    # section.
    # All repositories must reside in OracleBI\server\Repository
    # directory, where OracleBI is the directory in which the Oracle BI
    # Server software is installed.
    [ REPOSITORY ]
    Star     =     OracleBIAnalyticsApps.rpd, DEFAULT
    # Query Result Cache Section
    [ CACHE ]
    ENABLE     =     NO;
    // A comma separated list of <directory maxSize> pair(s)
    // e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
    DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
    MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
    MAX_CACHE_ENTRY_SIZE = 1 MB;
    MAX_CACHE_ENTRIES = 1000;
    POPULATE_AGGREGATE_ROLLUP_HITS = NO;
    USE_ADVANCED_HIT_DETECTION = NO;
    MAX_SUBEXPR_SEARCH_DEPTH = 7;
    // Cluster-aware cache
    // GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
    // MAX_GLOBAL_CACHE_ENTRIES = 1000;
    // CACHE_POLL_SECONDS = 300;
    // CLUSTER_AWARE_CACHE_LOGGING = NO;
    # General Section
    # Contains general server default parameters, including localization
    # and internationalization, temporary space and memory allocation,
    # and other default parameters used to determine how data is returned
    # from the server to a client.
    [ GENERAL ]
    // Localization/Internationalization parameters.
    LOCALE     =     "English-usa";
    SORT_ORDER_LOCALE     =     "English-usa";
    SORT_TYPE = "binary";
    // Case sensitivity should be set to match the remote
    // target database.
    CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
    // SQLServer65 sorts nulls first, whereas Oracle sorts
    // nulls last. This ini file property should conform to
    // that of the remote target database, if there is a
    // single remote database. Otherwise, choose the order
    // that matches the predominant database (i.e. on the
    // basis of data volume, frequency of access, sort
    // performance, network bandwidth).
    NULL_VALUES_SORT_FIRST = OFF;
    DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
    DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
    TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
    // Temporary space, memory, and resource allocation
    // parameters.
    // You may use KB, MB for memory size.
    WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
    SORT_MEMORY_SIZE = 4 MB ;
    SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
    VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
    // Analytics Server will return all month and day names as three
    // letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
    // To use complete names, set the following values to YES.
    USE_LONG_MONTH_NAMES = NO;
    USE_LONG_DAY_NAMES = NO;
    UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
    // Aggregate Persistence defaults
    // The prefix must be between 1 and 8 characters long
    // and should not have any special characters ('_' is allowed).
    AGGREGATE_PREFIX = "SA_" ;
    # Security Section
    # Legal value for DEFAULT_PRIVILEGES are:
    # NONE READ
    [ SECURITY ]
    DEFAULT_PRIVILEGES = READ;
    PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
    MINIMUM_PASSWORD_LENGTH     =     0;
    #IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
    #SSL=NO;
    #SSL_CERTIFICATE_FILE="servercert.pem";
    #SSL_PRIVATE_KEY_FILE="serverkey.pem";
    #SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
    #SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
    #SSL_VERIFY_PEER=NO;
    #SSL_CA_CERTIFICATE_DIR="CACertDIR";
    #SSL_CA_CERTIFICATE_FILE="CACertFile";
    #SSL_TRUSTED_PEER_DNS="";
    #SSL_CERT_VERIFICATION_DEPTH=9;
    #SSL_CIPHER_LIST="";
    # There are 3 types of authentication. The default is NQS
    # You can select only one of them
    #----- 1 -----
    #AUTHENTICATION_TYPE = NQS; // optional and default
    #----- 2 -----
    #AUTHENTICATION_TYPE = DATABASE;
    # [ DATABASE ]
    # DATABASE = "some_data_base";
    #----- 3 -----
    #AUTHENTICATION_TYPE = BYPASS_NQS;
    # Server Section
    [ SERVER ]
    SERVER_NAME = Oracle_BI_Server ;
    READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
    MAX_SESSION_LIMIT = 2000 ;
    MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
    SERVER_THREAD_RANGE = 40-100;
    SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
    DB_GATEWAY_THREAD_RANGE = 40-200;
    DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
    MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
    MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
    MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
    MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
    INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
    CLIENT_MGMT_THREADS_MAX = 5; // default is 5
    # The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
    # a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
    RPC_SERVICE_OR_PORT = 9703; // default is 9703
    # If port is not specified with a host name or IP in the following option, the port
    # number specified at RPC_SERVICE_OR_PORT will be considered.
    # When port number is specified, it will override the one specified with
    # RPC_SERVICE_OR_PORT.
    SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
    # or "IP1","IP2":port or
    # "hostname":port,"IP":port2.
    # Note: When this option is active,
    # CLUSTER_PARTICIPANT should be set to NO.
    ENABLE_DB_HINTS = YES; // default is yes
    PREVENT_DIVIDE_BY_ZERO = YES;
    CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
    # SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
    # for the cluster participant yet.
    // Following required if CLUSTER_PARTICIPANT = YES
    #REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
    #REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
    DISCONNECTED = NO;
    AUTOMATIC_RESTART = YES;
    # Dynamic Library Section
    # The dynamic libraries specified in this section
    # are categorized by the CLI they support.
    [ DB_DYNAMIC_LIBRARY ]
    ODBC200 = nqsdbgatewayodbc;
    ODBC350 = nqsdbgatewayodbc35;
    OCI7 = nqsdbgatewayoci7;
    OCI8 = nqsdbgatewayoci8;
    OCI8i = nqsdbgatewayoci8i;
    OCI10g = nqsdbgatewayoci10g;
    DB2CLI = nqsdbgatewaydb2cli;
    DB2CLI35 = nqsdbgatewaydb2cli35;
    NQSXML = nqsdbgatewayxml;
    XMLA = nqsdbgatewayxmla;
    ESSBASE = nqsdbgatewayessbasecapi;
    # User Log Section
    # The user log NQQuery.log is kept in the server\log directory. It logs
    # activity about queries when enabled for a user. Entries can be
    # viewed using a text editor or the nQLogViewer executable.
    [ USER_LOG ]
    USER_LOG_FILE_SIZE = 10 MB; // default size
    CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
    # Usage Tracking Section
    # Collect usage statistics on each logical query submitted to the
    # server.
    [ USAGE_TRACKING ]
    ENABLE = YES;
    //==============================================================================
    // Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
    STORAGE_DIRECTORY = "<full directory path>";
    CHECKPOINT_INTERVAL_MINUTES = 5;
    FILE_ROLLOVER_INTERVAL_MINUTES = 30;
    CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
    //==============================================================================
    DIRECT_INSERT = YES;
    //==============================================================================
    // Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
    PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT" ; // Or "<Database>"."<Schema>"."<Table>" ;
    CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool>" ;
    BUFFER_SIZE = 10 MB ;
    BUFFER_TIME_LIMIT_SECONDS = 5 ;
    NUM_INSERT_THREADS = 5 ;
    MAX_INSERTS_PER_TRANSACTION = 1 ;
    //==============================================================================
    # Query Optimization Flags
    [ OPTIMIZATION_FLAGS ]
    STRONG_DATETIME_TYPE_CHECKING = ON ;
    # CubeViews Section
    [ CUBE_VIEWS ]
    DISTINCT_COUNT_SUPPORTED = NO ;
    STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
    USE_SCHEMA_NAME = YES ;
    USE_SCHEMA_NAME_FROM_RPD = YES ;
    DEFAULT_SCHEMA_NAME = "ORACLE";
    CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
    LOG_FAILURES = YES ;
    LOG_SUCCESS = NO ;
    LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
    # MDX Member Name Cache Section
    # Cache subsystem for mapping between unique name and caption of
    # members for all SAP/BW cubes in the repository.
    [ MDX_MEMBER_CACHE ]
    // The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
    ENABLE = NO ;
    // The path to the location where cache will be persisted, only applied to a single location,
    // the number at the end indicates the capacity of the storage. When the feature is enabled,
    // administrator needs to replace the "<full directory path>" with a valid path,
    // e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
    DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
    // Maximum disk space allowed for each user;
    MAX_SIZE_PER_USER = 100 MB ;
    // Maximum number of members in a level will be able to be persisted to disk
    MAX_MEMBER_PER_LEVEL = 1000 ;
    // Maximum size for each individual cache entry size
    MAX_CACHE_SIZE = 100 MB ;
    # Oracle Dimension Export Section
    [ ORA_DIM_EXPORT ]
    USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
    DEFAULT_SCHEMA_NAME = "ORACLE";
    ORA_DIM_SCHEMA_NAME = "ORACLE";
    LOGGING = ON ; # OFF, DEBUG
    LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";
    Help me out Gurus thanks in advance

    Hi,
    Star = OracleBIAnalyticsApps.rpd, DEFAULTthis should be end with semicolon
    Star = OracleBIAnalyticsApps.rpd, DEFAULT;
    Assign Points and close thread, if your question is answered...
    Cheers,
    Aravind

  • [SOLVED] Php.ini syntax error, unexpected '&'

    Hi guys,
    I'm having a trouble setting up a local hosted LAMP, I want to enable the error reporting and display, but it's giving me this error:
    [root@albert albert]# php
    PHP: syntax error, unexpected '&' in /etc/php/php.ini on line 105
    Line 105:
    ; error_reporting
    Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; this is the 105
    Development Value: E_ALL
    Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    And when I access to on localhost/phpmyadmin:
    Fatal error: Call to undefined function PMA_DBI_num_rows() in /usr/share/webapps/phpMyAdmin/libraries/navigation/Nodes/Node.class.php on line 408
    When I comment the line 105,106,107, it works as I expected, but I can't see any error output...
    Here it's the entire php.ini:
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    Default Value: On
    Development Value: On
    Production Value: Off
    ; display_startup_errors
    Default Value: Off
    Development Value: On
    Production Value: Off
    ; error_reporting
    Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    Development Value: E_ALL
    Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    Default Value: On
    Development Value: On
    Production value: On
    ; log_errors
    Default Value: Off
    Development Value: On
    Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/home/albert/Dropbox/bitday/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.
    ibase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ibase.max_links = -1
    ; Default database name for ibase_connect().
    ;ibase.default_db =
    ; Default username for ibase_connect().
    ;ibase.default_user =
    ; Default password for ibase_connect().
    ;ibase.default_password =
    ; Default charset for ibase_connect().
    ;ibase.default_charset =
    ; Default timestamp format.
    ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
    ; Default date format.
    ibase.dateformat = "%Y-%m-%d"
    ; Default time format.
    ibase.timeformat = "%H:%M:%S"
    [MySQL]
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysql.allow_local_infile
    mysql.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysql.allow-persistent
    mysql.allow_persistent = On
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysql.cache_size
    mysql.cache_size = 2000
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysql.max-persistent
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/mysql.max-links
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysql.default-port
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysql.default-socket
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-host
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-user
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysql.default-password
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    ; http://php.net/mysql.connect-timeout
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    ; http://php.net/mysql.trace-mode
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysqli.max-persistent
    mysqli.max_persistent = -1
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysqli.allow_local_infile
    ;mysqli.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysqli.allow-persistent
    mysqli.allow_persistent = On
    ; Maximum number of links. -1 means no limit.
    ; http://php.net/mysqli.max-links
    mysqli.max_links = -1
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysqli.cache_size
    mysqli.cache_size = 2000
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysqli.default-port
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysqli.default-socket
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-host
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-user
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysqli.default-pw
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mysqlnd]
    ; Enable / Disable collection of general statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_statistics
    mysqlnd.collect_statistics = On
    ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_memory_statistics
    mysqlnd.collect_memory_statistics = Off
    ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
    ; http://php.net/mysqlnd.net_cmd_buffer_size
    ;mysqlnd.net_cmd_buffer_size = 2048
    ; Size of a pre-allocated buffer used for reading data sent by the server in
    ; bytes.
    ; http://php.net/mysqlnd.net_read_buffer_size
    ;mysqlnd.net_read_buffer_size = 32768
    [OCI8]
    ; Connection: Enables privileged connections using external
    ; credentials (OCI_SYSOPER, OCI_SYSDBA)
    ; http://php.net/oci8.privileged-connect
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ; http://php.net/oci8.max-persistent
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ; http://php.net/oci8.persistent-timeout
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ; http://php.net/oci8.ping-interval
    ;oci8.ping_interval = 60
    ; Connection: Set this to a user chosen connection class to be used
    ; for all pooled server requests with Oracle 11g Database Resident
    ; Connection Pooling (DRCP). To use DRCP, this value should be set to
    ; the same string for all web servers running the same application,
    ; the database pool must be configured, and the connection string must
    ; specify to use a pooled server.
    ;oci8.connection_class =
    ; High Availability: Using On lets PHP receive Fast Application
    ; Notification (FAN) events generated when a database node fails. The
    ; database must also be configured to post FAN events.
    ;oci8.events = Off
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ; http://php.net/oci8.statement-cache-size
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ; http://php.net/oci8.default-prefetch
    ;oci8.default_prefetch = 100
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ; http://php.net/oci8.old-oci-close-semantics
    ;oci8.old_oci_close_semantics = Off
    [PostgreSQL]
    ; Allow or prevent persistent links.
    ; http://php.net/pgsql.allow-persistent
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    ; http://php.net/pgsql.auto-reset-persistent
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/pgsql.max-persistent
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    ; http://php.net/pgsql.max-links
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    ; http://php.net/pgsql.ignore-notice
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    ; http://php.net/pgsql.log-notice
    pgsql.log_notice = 0
    [Sybase-CT]
    ; Allow or prevent persistent links.
    ; http://php.net/sybct.allow-persistent
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/sybct.max-persistent
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/sybct.max-links
    sybct.max_links = -1
    ; Minimum server message severity to display.
    ; http://php.net/sybct.min-server-severity
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    ; http://php.net/sybct.min-client-severity
    sybct.min_client_severity = 10
    ; Set per-context timeout
    ; http://php.net/sybct.timeout
    ;sybct.timeout=
    ;sybct.packet_size
    ; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
    ; Default: one minute
    ;sybct.login_timeout=
    ; The name of the host you claim to be connecting from, for display by sp_who.
    ; Default: none
    ;sybct.hostname=
    ; Allows you to define how often deadlocks are to be retried. -1 means "forever".
    ; Default: 0
    ;sybct.deadlock_retry_count=
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    ; http://php.net/bcmath.scale
    bcmath.scale = 0
    [browscap]
    ; http://php.net/browscap
    ;browscap = extra/browscap.ini
    [Session]
    ; Handler used to store/retrieve data.
    ; http://php.net/session.save-handler
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; The path can be defined as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ; http://php.net/session.save-path
    ;session.save_path = "/tmp"
    ; Whether to use cookies.
    ; http://php.net/session.use-cookies
    session.use_cookies = 1
    ; http://php.net/session.cookie-secure
    ;session.cookie_secure =
    ; This option forces PHP to fetch and use a cookie for storing and maintaining
    ; the session id. We encourage this operation as it's very helpful in combating
    ; session hijacking when not specifying and managing your own session id. It is
    ; not the end all be all of session hijacking defense, but it's a good start.
    ; http://php.net/session.use-only-cookies
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    ; http://php.net/session.name
    session.name = PHPSESSID
    ; Initialize session on request startup.
    ; http://php.net/session.auto-start
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    ; http://php.net/session.cookie-lifetime
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    ; http://php.net/session.cookie-path
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    ; http://php.net/session.cookie-domain
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    ; http://php.net/session.cookie-httponly
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    ; http://php.net/session.serialize-handler
    session.serialize_handler = php
    ; Defines the probability that the 'garbage collection' process is started
    ; on every session initialization. The probability is calculated by using
    ; gc_probability/gc_divisor. Where session.gc_probability is the numerator
    ; and gc_divisor is the denominator in the equation. Setting this value to 1
    ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
    ; the gc will run on any give request.
    ; Default Value: 1
    ; Development Value: 1
    ; Production Value: 1
    ; http://php.net/session.gc-probability
    session.gc_probability = 1
    ; Defines the probability that the 'garbage collection' process is started on every
    ; session initialization. The probability is calculated by using the following equation:
    ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
    ; session.gc_divisor is the denominator in the equation. Setting this value to 1
    ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
    ; the gc will run on any give request. Increasing this value to 1000 will give you
    ; a 0.1% chance the gc will run on any give request. For high volume production servers,
    ; this is a more efficient approach.
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; http://php.net/session.gc-divisor
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    ; http://php.net/session.gc-maxlifetime
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; find /path/to/sessions -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope.
    ; PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled. This feature
    ; introduces some serious security problems if not handled correctly. It's
    ; recommended that you do not use this feature on production servers. But you
    ; should enable this on development servers and enable the warning as well. If you
    ; do not enable the feature on development servers, you won't be warned when it's
    ; used and debugging errors caused by this can be difficult to track down.
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/session.bug-compat-42
    session.bug_compat_42 = Off
    ; This setting controls whether or not you are warned by PHP when initializing a
    ; session value into the global space. session.bug_compat_42 must be enabled before
    ; these warnings can be issued by PHP. See the directive above for more information.
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/session.bug-compat-warn
    session.bug_compat_warn = Off
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    ; http://php.net/session.referer-check
    session.referer_check =
    ; How many bytes to read from the file.
    ; http://php.net/session.entropy-length
    ;session.entropy_length = 32
    ; Specified here to create the session id.
    ; http://php.net/session.entropy-file
    ; Defaults to /dev/urandom
    ; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
    ; If neither are found at compile time, the default is no entropy file.
    ; On windows, setting the entropy_length setting will activate the
    ; Windows random source (using the CryptoAPI)
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    ; http://php.net/session.cache-limiter
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    ; http://php.net/session.cache-expire
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publicly accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    ; http://php.net/session.use-trans-sid
    session.use_trans_sid = 0
    ; Select a hash function for use in generating session ids.
    ; Possible Values
    ; 0 (MD5 128 bits)
    ; 1 (SHA-1 160 bits)
    ; This option may also be set to the name of any hash function supported by
    ; the hash extension. A list of available hashes is returned by the hash_algos()
    ; function.
    ; http://php.net/session.hash-function
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; Possible values:
    ; 4 (4 bits: 0-9, a-f)
    ; 5 (5 bits: 0-9, a-v)
    ; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; http://php.net/session.hash-bits-per-character
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; http://php.net/url-rewriter.tags
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Enable upload progress tracking in $_SESSION
    ; Default Value: On
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/session.upload-progress.enabled
    ;session.upload_progress.enabled = On
    ; Cleanup the progress information as soon as all POST data has been read
    ; (i.e. upload completed).
    ; Default Value: On
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/session.upload-progress.cleanup
    ;session.upload_progress.cleanup = On
    ; A prefix used for the upload progress key in $_SESSION
    ; Default Value: "upload_progress_"
    ; Development Value: "upload_progress_"
    ; Production Value: "upload_progress_"
    ; http://php.net/session.upload-progress.prefix
    ;session.upload_progress.prefix = "upload_progress_"
    ; The index name (concatenated with the prefix) in $_SESSION
    ; containing the upload progress information
    ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; http://php.net/session.upload-progress.name
    ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
    ; How frequently the upload progress should be updated.
    ; Given either in percentages (per-file), or in bytes
    ; Default Value: "1%"
    ; Development Value: "1%"
    ; Production Value: "1%"
    ; http://php.net/session.upload-progress.freq
    ;session.upload_progress.freq = "1%"
    ; The minimum delay between updates, in seconds
    ; Default Value: 1
    ; Development Value: 1
    ; Production Value: 1
    ; http://php.net/session.upload-progress.min-freq
    ;session.upload_progress.min_freq = "1"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.conf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ; http://php.net/assert.active
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ; http://php.net/assert.warning
    ;assert.warning = On
    ; Don't bail out by default.
    ; http://php.net/assert.bail
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ; http://php.net/assert.callback
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ; http://php.net/assert.quiet-eval
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ; http://php.net/com.typelib-file
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ; http://php.net/com.allow-dcom
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ; http://php.net/com.autoregister-typelib
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ; http://php.net/com.autoregister-casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ; http://php.net/com.autoregister-verbose
    ;com.autoregister_verbose = true
    ; The default character set code-page to use when passing strings to and from COM objects.
    ; Default: system ANSI code page
    ;com.code_page=
    [mbstring]
    ; language for internal character representation.
    ; http://php.net/mbstring.language
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ; http://php.net/mbstring.internal-encoding
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ; http://php.net/mbstring.http-input
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ; http://php.net/mbstring.http-output
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ; http://php.net/mbstring.encoding-translation
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ; http://php.net/mbstring.detect-order
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ; http://php.net/mbstring.substitute-character
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ; http://php.net/mbstring.func-overload
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_detection = Off
    ; This directive specifies the regex pattern of content types for which mb_output_handler()
    ; is activated.
    ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
    ;mbstring.http_output_conv_mimetype=
    [gd]
    ; Tell the jpeg decode to ignore warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ; http://php.net/gd.jpeg-ignore-warning
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings

    Hi, everything in the "Quick Reference" section should be commented out with ;
    You should change those settings further down in the php.ini file.
    Example:
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    display_errors = Off
    Last edited by adrianx (2013-07-26 12:32:02)

  • Memory leakage when using Ini-file VIs

    I'm using the Configuration File Vis to read and write data to different .ini files. The files contain both standard keys and clusters written as a segment using the Open G toolkit. Instead of opening the files and keeping them in the memory of the Config VIs I'm just using them to read and write, decode and encode...the references are all closed using the Close Config Data.vi. The problem is that even though immediately close the config data the application keeps grabbing more and more data...every time a configuration file is open, read or written to and the closed everything from 4K to 50K of additional memory has been allocated by the application (this is a stripped down application that only deals with the config files, so
    there are no other sources for the memory leak).
    Has anyone else experienced this? How can you repeatedly open and close config file slike this without it continoulsy allocating more memory?
    Attached is a copy of the VIs, the directory structure must be kept intact if the ini file is to be read correctly.
    I've been stearing so hard on this the whole day that I might just be overlooking something obvious...
    In the full application the VI init and write operations are only done when the user reconfigures the system, which may be a couple of times per month...so the memory leak would not cause a problem right away, but it would not be healthy to leave it there...
    MTO
    Attachments:
    Memory_Leak_Demo.zip ‏1391 KB

    Could you post a 6.1 version?
    LV7 is still about two weeks away for me.
    Does the problem show up in 6.1?
    I ran across an error while writting to a FP output that was not configured that would cause a "drop of memory" to leak every time the VI performed the write. The leak did not show up in the profiler but windows would show te memory foot print growing continually as long as the writes continued. The work around was "don't do that!".
    I bring this up because I found and reported this just prior to LV7 release and the featur may still be present in LV7. I also believe that Jean-Pierre used a "write and check" metod to detail with the unknown data types of of complex data structures.
    If you just read does it leak?
    If you just use simple data types do
    es it leak?
    Is the ini file growing?
    I really appreciate the effort you have been putting into the Dev-Exchange Mads! I wish i could do to more to help.
    Keep us posted.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Firefox profile cannot be loaded. It may be missing or inaccessible - yet no profile.ini file is missing (folder empty), clean reinstall has not not worked

    I'm running windows 8 and had recently handed my computer back to be repaired. When I got my computer back I started getting the error that states that "Your Firefox profile cannot be loaded. It may be missing or inaccessible." upon opening.
    I've had this before and just renamed the profile.ini file as something different forcing Firefox to create a new profile. However the profile.ini file is not there, at all.
    Everything that I've searched for shows profile management through firefox, but I can't open firefox to create any profiles so they don't help at all.
    Does anyone know

    This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 is no longer present on the hard drive.
    *Windows: "%AppData%\Mozilla\Firefox\"
    *Linux: ~/.mozilla/firefox/
    *Mac: ~/Library/Application Support/Firefox/
    *Delete the profiles.ini file to force Firefox to create a new default profile
    *Use the Profile Manager to create a new profile
    *Use "Choose Folder" to recover an existing profile if there is still one present
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.org/kb/Managing+profiles
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How to write Data from INI file to Ring control

    Hai,
    I need to write the Data read from INI file to a RING control.While doing this operation using Variants i am getting error.
    I will be pleased if somebody help me.I have attached the Particular INI file and the VI. 
    Solved!
    Go to Solution.
    Attachments:
    Read Serial IO INI data.vi ‏34 KB
    Serial IO paramters.ini ‏1 KB
    Serial Engine Initialize.ctl ‏6 KB

    Adding data to ring
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet
    Attachments:
    Adding data to ring.vi ‏10 KB

Maybe you are looking for

  • No Workflow created for BPM

    Dear Experts, I'm trying to do a N:1 mapping using BPM. i have two different files coming in and i have to merge into one. i used multimapping and designed the Integration process based on the example given in SAP BASIS http://sap.com/xi/XI/System/Pa

  • Date format in CSV file

    Hello, I am working on loading program which downloads the application server CSV file to internal table. In the CSV file there is a field date in the format (22/05/2008). When I move this to my internal table field date, it is truncating to '22/05/2

  • Issue during Depreciation Below Zero Calcualtion

    Dear All, I have configured for depreciation below calculation with a separate depreciation area. There is no depreciation calculated till the end of useful life. It is workign fine, but issue is that if an asset's useful life is expiring in between

  • What's the point of Weblogic JAAS authentication?

    Hello, I'm looking into one way authentication using weblogic and JAAS, Weblogic say this is the preferred mechanism, however I can't see the advantages. My (ok, limited) understanding of it is thus: The advantage of JAAS is that you can specify diff

  • Cannot Transfer Audition 3 Activation

    Moving to a new computer, tried to transfer the old PC's activation of Audition, was told the server is unavailable. Per online instructions, I deleted Audition from my old computer,since I could not deactivate am existing install. Automated phone ac