Turbo-Boost: How to find out about current processor sped?

On the new Mac Pros the processors can enter Turbo-Boost-mode. How can I find out at which speed the processors are currently running?
Thanks!

It is complicated. Can happen in nanoseconds. And depends on processor and load as to how many cores will go to sleep and how many go into turbo... if the app is single threaded.
It is something you don't really need to know or worry about.
There are better tools for Windows to monitor core temp and frequency (and voltage).

Similar Messages

  • How to find out about the SMTP Server

    Hi,
    I have been trying to configure groupware in the portal - in particular I want to enable the sending of emails through the portal. I already have a how-to-guide that that seems to explain the steps quite well. However, it mentions that I need to know the SMTP Server of the email. Can you tell me how to find out about the SMTP Server? Where do I need to look for the name of it?
    Thank you and regards,
    Katharina

    Hi Katharina,
    you need the SMTP server of your company. This means you can't look for it in the portal, but have to ask the responsible person in your company.
    Kind regards,
    dominik

  • How to find out about questions

    How to find out about a question I submitt with out looking through everything?

    If your question is .... you submit a question and then just want to see replies to it? Enable email notifications, and you'll get an email when people respond to your post. Each email includes a link you can click on to go immediately to the thread you started.

  • How to find out the current hostname?

    How do I find out the current hostname for a given SoaSuite installation?
    Peter

    You can check the WSDL of any of your BPEL processes on BPEL console.

  • How to find out the current form name

    Hi all,
    I have to pass the current sapcript form name in the sauroutine pool for some further processing.
    I just wanted to is there any variable, method, or way to find out the current/running Sapscript form name generically so that we can pass it on to subpool.
    Looking forward for your reply.
    Regards,
    Anuja.

    Hi All,
    Many thnaks for your replies.
    Actually in my case the situation is, i have to change in multiple forms.
    I mean the same perform needs to be used in all the forms almost around 20 using the current form name.
    So that perform should be generic. I mean is there any variable/ method or way to get the current form name so that we can pass that to the subroutine pool through form.
    Looking forward for yoour reply.
    Regards,
    Anuja.

  • How to find out the current number of rows in a form without navigation

    Hi.
    Is there any way to count the rows in a form (block) without navigation to the last record?
    I am modifying CUSTOM.pll and have to count the rows before user commits changes.
    All records are new in this case. Can anyone halp me? Thanks.
    Regards
    Tomáš

    Magoo wrote:
    no, such a block-property ^unfortunately^ does not exists.
    you can just go to to the block, call the last_record build-in and find out, where the cursor is.
    But with this you call restrictred procedures and their are not everywhere allowed ...
    If you execute a query on a block, may not all records getting retrieved from database.
    For this forms does not know, how many records are really in the block and
    for this there is no build-in like get_block_property ( records_count ).It does exist indeed. GET_BLOCK_PROPERTY('BLOCK',QUERY_HITS);
    Of course, this will return the number of records that would get fetched to the block (based on the where condition), but not the records with NEW status (i.e new records which are not yet committed).
    -Arun

  • How to find out the current workspace?

    Assume I have a couple of possible workspaces on my harddisc.
    Can I find out for a JDev installation which of them is currently used?
    Peter

    respect...
    you didn't explain yourself properly. I too wondered if you were writing a JDev extension which this is a common question that comes up. Use case is everything when it comes to helping people to understand what you are trying to achieve.
    If you hold your mouse over your application or project file icon in the application navigator it displays the full path of the current workspace/project.
    Brenden

  • How to find out the current index

    Hello Experts,
               How to find the current index and whatever we entered in that table how to ratrieved that entry value.pls give the suggest..

    Hi,
    To get current index write below piece of code in the outbound plug for your F4 help pop up.
    We have to write this in the outbound plug itself otherwise it will not work.
    let me know whethere it worked or not
    cl_chtmlb_config_utility=>outbound_plug_event_info( EXPORTING iv_event_string = lv_event_string
                                                          IMPORTING ev_index        = gv_index ).
    Regards,
    Swapna

  • How to find out the current VM Version?

    hi
    I want to find out with witch VM Version my java application runs.
    what methods or syntax do I need to get the VM Version as a return value.
    thanx in advance for the replies.

    Hi! Look at the docs for the getProperties() method in the java.lang.System class. It lists several properties related to the VM that you can retrieve at run time.
    Hope this helps!
    Cheers!

  • How to Find out about CN21 rollout at my exchange

    Hi all. Whilst doing some mooching around on t'interweb I discovered that our exchange (Melbourne EMMELBO) is finally dragging itself out of the dark ages and having CN21 installed on 31/11/12. This is according to the data shown on both Kitz and SamKnows web site.
    Can someone tell me, whether this means that this is the date the equipment will be installed in the exchange, or when it will be rolled out to the customer.
    If it is the former, who can I ask about when it will be available to Joe public?
    Thanks

    hope just a typo as there is no 31/11/12 only 30 days in November.
    date is normally when wholesale expect to have completed upgrade to the exchange.  ISP's like BT retail will rollout after this date but it could be weeks or even months before BT retail customers get an email advising that BT are rolling out the upgrade to 21CN to customers.  There are numerous posts on the forum asbout this and how people have jumped the queue and upgraded sooner - normally involving a new contract
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How to find out the current  screen resolution/width in webdynpro.

    HI,
    Can any one please tell me how to get the screen resolution in webdynpro?
    Regards
    -Sandip

    Hi Sandip,
    - view size can be set by setting the 'width' of the RootUIElementContainer. By defalut, it will be 100% only. Also, It is always better to use the % coz it does not distort your view with different screen resolutions.
    - while creating the iview, you have the property like 'HeightType'. There you can set the value as FIXED, AUTOMATIC & FULL_PAGE. If you wish, you may leave it as it is.
    - All you have the properties like 'Fixed Height' etc to set the size values.
    Regards
    Chander Kararia
    # Please close the thread once get the correct answer. Give rewards for answers.
    Edited by: Chander Kararia on Feb 20, 2009 9:55 AM

  • Does anyone have any idea how to find out the version of weblogic plugin

    Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
    I could not find version in plugin directory.
    it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
    Sun One 6.1 SP6
    Weblogic 9.2
    Solaris 5.10
    Edited by: 985608 on 01-feb-2013 8:20
    Edited by: 985608 on 04-feb-2013 6:25
    Edited by: 985608 on 04-feb-2013 6:27

    Hi,
    You can find version of weblogic plugin using below command.
    strings <plugin module file> | grep -i wlsplugins
    Mark if this helps.
    Regards,
    Kishore

  • JS CS3: Is a property read only? How to find out...

    Hello all,
    I found out about the x.reflect.properties object and find it very helpful in my current project.
    Now I know how to find out about the properties of a dynamically given object :)
    But here's the rub: is there any better way to find out if I can actually change one of those properties (i.e. whether it is not "read-only") other than just to try {} catch(){} it?
    Thank you
    Gerald

    [email protected] wrote:
    > Hello all,
    >
    > I found out about the x.reflect.properties object and find it very helpful in my current project.
    >
    > Now I know how to find out about the properties of a dynamically given object :)
    >
    > But here's the rub: is there any better way to find out if I can actually change one of those properties (i.e. whether it is not "read-only") other than just to try {} catch(){} it?
    From the JS Tools Guide
    ReflectionInfo.type (String)
    The type of the reflected element. One of:
    readonly: A Read only property.
    readwrite: A read-write property.
    createonly: A property that is valid only during creation of an
    object.
    method: A method.
    for photoshop scripting solutions of all sorts
    contact: [email protected]

  • How to find out the users currently logged into ODI

    Hi all,
    How to find out the users currently logged into ODI Work Repository?
    Thanks.

    Hi,
    It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
    Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
    I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
    Thanks,
    katukota

  • How do you find out about new VoD videos

    Quick question for FiOS TV users - how do you (personally) find out about new on-demand videos?
    Do you rely on the Spotlight email, or the trailers playing in the VoD store-front, or mail inserts etc? Keen to hear what everyone thinks works best!
    Thanks,
    Rich

    Here is one suggestion for you.
    http://www22.verizon.com/residential/fiostv/vod/vod.htm
    Joe D
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™!

Maybe you are looking for