Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

hello every body,
For:-
HP DV6-2170ee with I7 720 qm processor
System: Windows 7 Professional SP1 32 bit
I have a strange problem, while i am working on battery processor can boost up to 2.6 but when i connect it to the Ac adpater charger, no boost is there?!!!!
Checked through internet and did the following:-
1-update the bios.
2-check power option and use the same settings as in battery mode.
3-observe processor temperature through CPUID HWmonitor, it's almost 65 lower than 67 in the battery case.
4-searched allover the whole internet google .. yahooo ...
5-Each time i try to install the SP50038 which is the driver for the inter turbo boost, it gives an error message "your pc doesn't meet the minimum requirement"
TIll the moment no solution, could you please help me ?
Thank you for your time ans i hope to receive solutions soon ..
Thanks in advance ;-)
This question was solved.
View Solution.

Hi,
To answer your last question first, the Turbo Boost Technology Driver is only intended for processors with an integrated GPU - the i7-720QM does not have this.
More difficult is why you observe no Turbo Boost on AC Power.
Try the following.
Shut down the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has reloaded, download and install the Turbo Boost Technology Monitor from Intel on the following link and see what this shows.
http://www.intel.com/support/processors/sb/CS-031038.htm?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

hello every body,
I have a strange problem, while i am working on battery processor can boost up to 2.6 but when i connect it to the Ac adpater charger, no boost is there?!!!!
Checked through internet and did the following:-
1-update the bios.
2-check power option and use the same settings as in battery mode.
3-observe processor temperature through CPUID HWmonitor, it's almost 65 lower than 67 in the battery case.
4-searched allover the whole internet google .. yahooo ...
TIll the moment no solution, could you please help me ?
Thank you for your time ans i hope to receive solutions soon ..
Thanks in advance ;-)

Have you made sure you are using the high performance profile? Here is where you can check:
Double check you performance profile and make sure its on HIgh Performance. Also download CPU-Z to monitor your CPU speed. Im unsure if the turbo boost applies to all the cores of the processor. CPU-Z will give you a better idea of whats going on.
CPU-Z
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

i lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

Hi,
This assumes that Windows 7 was the original OS that your notebook came with.
If you created a set of Recovery Discs you can use these to reinstall the original OS - they will also re-create the Recovery Partition on the Hard Drive as well as reinstalling all your original software. Remember this is a destructive process, so back up any personal files etc that you wish to keep before reinstalling the Operating System.
If you don't have your original Recovery Discs, you can order a replacement set using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Unable to install itunes for new computer with windows 8

unable to install itunes for new computer with windows 8
states this app unable to run on this PC

Hello jgrn76,
It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
iTunes 11.1.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
If issues persist when trying to install it, I would try running through the steps in the article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Otherwise, would you mind elaborating a bit on what the error message says, word for word?
Thank you for using Apple Support Communities.
Regards,
Sterling

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

How do i solve the following error message that come with uploading to itunes Match: The itunes library file can not be saved. you do not have enough access privileges for this operation with windows xp

Bump.

I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?

I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?

Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda

HT4436 iCloud control panel for my PC with Windows 7

I just downloaded iCloud control panel for my PC with Windows 7, created an Apple ID, but when trying to open iCloud control panel it says the info I typed in is a legitimate Apple ID but not an iCloud login. ***?

Have you ensured that PhotoStream is on in the iCloud Settings in your iPhone?
Make sure you're connected to WiFi with a good connection.
Make sure you have at least 20% battery life on your phone. PhotoStream will not work unless you have at least 20% battery.
Try turning your phone off and then turning it back on again.

Palm m500 Hotsync with Windows 7 Home Basic - 32 bit

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
I tried hot-syncing by installing Palm Desktop 4.1.4. and Palm 6.2. Have both on my PC. It did do a hot-sync but only to back-up data. I need to view the data on my PC/Monitor.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step simple instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........
Myra

You can give this a try if you havent done it yet...
How to import the Address Book from Palm Desktop to Outlook
You may need to install this too if it is Outlook 2007
Outlook 2007 Update (Windows installer) for Palm OS
For other outlook versions download from this link:
Downloads
There is another post that said you may be able to transfer it using the Infrared feature in the device.
Check POST
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

HP Advisor stops working on my Pavilion p6330f with Windows 7 Home Premium 64 bit system

My computer is a Pavilion p6330f with Windows 7 Home Premium 64 bit system. It bothers me when I get error messages and can't seem to correct the problem. After loging onto my computer a message comes on that the HP Advisor stopped working. When I attempt to load the HP Advisor it gives me the same message and does not come up.

HP Advisor-one of the first things I uninstall, flaky software.
Have you tried the update for Advisor from your support & drivers page?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4120...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Is Oracle EBS compatible with Windows 7 Home Premium 64-bit OS?

Hi,
Is Oracle EBS compatible with Windows 7 Home Premium 64-bit OS? If yes, how come I don't find the appropriate e-delivery download on edelivery? Thanks.
Ari

Hi Ari;
Which Windows OS is R12 completely compatible with? All tiers? For all your certifed question please refer Oracle certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
My Oracle Support Certification Information -> Oracle E-Business Suite -> Applications Technology -> Lifecycle Management -> Application Install -> R12 -> 12 or 12.1 -> Tier -> Database&application -> plarform Windows
Regard
Helios

Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

Hi All,
Has anyone been able to install DSEE 7 on Windows 2008 R2 SP1 64-bit? Is it supported?
I followed the instructions and when run the command (as the Administrator) below nothing happen, it simply return an empty command prompt. Ms VC 2008 Redistributables (the one that come with the archive) is installed.
dsccsetup.exe war-file-create
dsccsetp.exe ads-create
When run the same command using the same archive on Windows 7 64-bit it does prompt for further input or report error.
Any suggestions or help would be much appreciated.
Shane L

Windows 2008 R2 is not listed as a supported OS in the release notes.
http://docs.oracle.com/cd/E19424-01/820-4805/820-4805.pdf
It lists:
Microsoft Windows Server 2008 Standard Edition for x86 and x64 Service Pack 1
Microsoft Windows Server 2008 Enterprise Edition for x86 and x64 Service Pack 1
If you are able to go to the next version, it is listed as supported in the release notes for ODSEE 11g:
http://www.oracle.com/technetwork/middleware/downloads/odsee-11gr1certmatrix-161592.xls
I have not tried 11g on 2008 R2 myself, but if it is in the certification matrix, it should work.
Hope that helps,
Eric

Turbo Boost Problem on Batteries in 4530s Probook

Hi Friends!
Please Some one help me , I have 4530s probook (LJ518UT) laptop Core i5 2450M. My Problem is turbo boost not working on batteries , But its Completly Working When i connect my Charger, Please Solved this Problem. My Laptop Bios Version is f.30 Updated 27 dec 2012. My Operating System is Windows 7 Home Premium. Please Reply me Urgently guys & Solve that problem.... Thanks in Advance.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
This question was solved.
View Solution.

Hi,
Try the following.
First, uninstall Skype and when this has completed, restart the notebook.
When windows has reloaded, download and reinstall the Chipset driver Here.
When the installation has finished, restart the notebook again.
Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Reinstall Skype and see if the Mic now works Ok.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

G580 (i5-3210m;gt635m) Turbo Boost problem

Hello!
I've bought the new G580 with the i5-3210m and the nVidia gt635m. The problem is that when i want to install the Turbo Boost Gadget on Win7(downloaded from Intel download center), it says that my processor is not compatible with the turbo boost. So how can I fix this problem? I installed all of the drivers from the DVD that came with the machine.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage.
You can access the enterprise support forums at the following link.
http://h30499.www3.hp.com/
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Turbo boost problem for DV6-2170ee with Windows 7 Proffessional SP1 32 bit

Similar Messages

Maybe you are looking for