Turbo Intel Drive - 'your laptop does not meet the minimal requirements'

I have a HP Pavillion dv6-2155dx laptop with OS Windows 7, 32bit.
I recently just reformatted the laptop after receiving it from my aunt
and was redownloading the drivers after the format when the Intel Turbo Driver wouldn't work.
I'd get it to install, however a message saying my laptop doesn't meet the minimal requirements
would pop up after it finished installing.
How do I fix this? 

The Airport 802.11n Cards use MiMo technology to communicate with the Computer. MiMo stands for Multiple In, Multiple Out, resulting in much higher datarates. This allows the processor to boost the power of the Airport Card's Chip.
Only Core2Duo Processors support MiMo.

Similar Messages

  • Your system does not meet the minimum requirement for this update (9996)

    Hi
    recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however  the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
    Hardware Ids are:
    PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
    PCI\VEN_8086&DEV_0000&SUBSYS_00008086
    PCI\VEN_8086&DEV_0000&CC_020000
    PCI\VEN_8086&DEV_0000&CC_0200
    Regards artie 

    I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
    I tend to agree that either the NIC is bad or possiblly a factory restore would help.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • I receive the error "axError.gifSorry, your device does not meet the system requirements that are needed to support BlackBerry App World

    Hi My name is Tibor Madarasi i purchased a Blackberry 8900 brand new i can't install app world i instaled the updates for this phone (v4.2.0.85)still can install app world i receive the error "axError.gif Sorry, your device does not meet the system requirements that are needed to support BlackBerry App World." I'm using O2 network in London UK Please advice me Regards
    Message Edited by MichelleK on 06-15-2009 09:53 AM

    ffbizz wrote:
    I hate this bold 9700 series 2 no carrier and find it to be a pathetic product backed up by even more pathetic support so I have decided to use it as a torch. There is an app for this but it requires app world first. Are you trying to say that I MUST have a carrier and they will resolve this issue but otherwise RIM cannot do anything about their own product?
    Hello and Welcome to the Forums!
    We are so sorry that you are having so many difficulties. While many experience the same (a search here will reveal that fact), there are also many who have very positive experiences with their BB. Not every device is suitable for everyone -- which IMHO is why there are so many choices.
    In addition, but for AppWorld, front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
    As to AppWorld Support (beyond what we volunteer to provide in these forums), that is available via this portal:
    https://www.blackberry.com/CSOHelp/index.do?ft=generic
    If you choose to submit to them in this manner, then please use, in the "Please select a component:" field, the AppWorld Billing/Payment selection. Any other selection will simply route you back anonymously to these public forums.
    As to your question, RIM and the carriers both participate in AppWorld. My suspicion is that the carriers get a portion of the costs for the apps that are vended via AppWorld -- but that's just my suspicion. Hence, the use of AppWorld indeed requires a carrier (and, indeed, the proper data plan level from them).
    But, AppWorld is merely a portal, vending apps that are (for the most part) developed by others. As such, it is not the only portal in the world for BB apps. There are a few, I think, apps that are exclusively vended via AppWorld...but I think that number is rather small. Consequently, if you desire an app that will allow your BB to function as you desire, you should seek out alternative vending portals. There are plenty.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

    I have a Curve 8300.  With OS v4.5.0.81.  And I am on a BB Social network plan through my cell providor "Fido".
    I mainly use it for Facebook & Twitter  and have no problems using either app.  However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update.  Just decided to update today at home where I do have wifi.  However when I go to do the update, it gives me the following error:
    "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
    I have scoured for answers but haven't had much luck.  I tried checking for OS updates.  I apparently have the most current one that my phone will support.  I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone.  Got the same error.  Tried reinstalling it through app world, it installed just fine.  However it installed the version that I had previously had.  So I went to twitter's settings and checked for updates.  It prompted for one as I expected it would.  And when I tried to get the update.  It gave me that error again.  I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps.  Is it a software compatability issue?  Is it a hardware compatability issue?  Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

    Hi and welcome to the forums!
    The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
    Thanks,
    Bifocals
    BlackBerry Device Software 5.0 main support page
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • App World - Sorry, your device does not meet the system requiremen​ts that are needed

    Hi, I’ve just got a blackberry which is my first. I am new to this. I'm trying to download the App World on my phone because I would like to get some applications on my phone. As I try to download the App World it says "Sorry, your device does not meet the system requirements that are needed to support Blackberry App World." I have tried to download this on my computer Via Cable and on my Blackberry Via the Browser. If this doesn’t work for my blackberry is there any way around this so I can download applications from somewhere else. 
    Network Provider: 02
    Network Plan: Pay As You Go
    Thanks.

    Hi, thanks. Is this something my provider can activate free of charge or does this come at a monthly payment?
    Can someone provide a bit of information about this please.
    Thanks.

  • New iMac Intel - Hardware Does Not Meet the Minimum Requirements?

    When attempting to load Apeture I get a window pop up during the loading phase that states
    " Your computer hardware does not meet the minimum requirements for Apeture?"
    Any idea what this may be from. I have the new 17inch iMac with Intel processor and it worked before?
    Help woudl be greatly appreciated. This is my first Mac. I switched from a P.C. I have no idea how to even trouble shoot challenges as of yet.
    Thanks

    Hi, and welcome to the Mac.
    Aperture doesn't yet run on Intel hardware. A new version should be available in March, according to a blurb in the lower right corner of this page:
    http://www.apple.com/aperture/

  • We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation.  I keep getting this message trying to view how to videos on my new iPad mini, does the new full size iPad have the same lim

    'We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation'. I just received the iPad mini and get this message when I try to view videos.  Does the full size iPad support video play back?

    iPads have the same video requirements. What is the source of the video - streaming, download, from video camera?
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
    System Requirements
    Minimum
    One of the following Intel-based Mac computers:
    Mac Pro
    MacBook Pro
    MacBook
    MacBook Air
    iMac
    Mac mini
    Operating system:
    Mac OS X v10.5.8 or v10.6.2 or later
    Memory:
    1GB of RAM
    2GB of RAM required for Mac Pro
    Other requirements:
    DVD drive for installation
    1GB of disk space for application and documentation
    7GB of disk space for Sample Library

  • Best way to announce that the hardware does not meet the minimum requirements

         Hi Everybody!!!
         I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
    to use does not meet the minumum requirements.
         In a nutshell:
     * I just created a game using Direct3D / DirectX 11,
     * I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
    much died in my arms).
     * According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
    the customer detailing the Direct3D requirements."
     * I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
         I don't have much knowledge about the current trends:
     * I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
    is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
     * I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
     * I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
     * Then again, displaying that message in a command prompt may not be the best idea either.
         Any help is greatly appreciated!!!
         Best Regards,
         Tarh Ik
    Tarh ik

         Hi Chuck,
         I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
    a museum). The crash started as a driver unload call, and after that everything goes down.
         I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
         What I finished doing was to create two sets of shaders (pixel and vertex):
     * If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
     * If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
    that the computer did not match the hardware requirements.
          It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
          Best Regards,
          Tarh Ik
    PS: This posting has been posted "AS IS"
    Tarh ik

  • Does not meet the system requirement for installing BB App World

    I bought a Curve 8520 in Singapore yesterday. When i tried to download App world into this phone, it says "my phone does not meet the system requirement for the software".  does it refer to hardware specification or the BB O/s version on the phone. How can fix it because being able to use App world is one of the purposes that i buy a BB.
    Also, How about MS Live Messenger , facebook ?  Do I need to install them seperately through App World?
    Please help!

    Hi there!
    Please see these links for reference:
    http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements
    http://www.blackberry.com/app_includes/devicesoftware/appworld/appworld_availability_en.html
    A key component in accessing AppWorld is your carrier -- if they are not delivering it, then you can't get it. If you don't have an adequate plan from them that incudes it, then you can't get it. Hence, if you meet the hardware requirements AND it is available in your country, then you need to contact your carrier to find out how you can get it via their network.
    All that said, AppWorld is merely a storefront, vending apps developed by others...there are many other storefronts available that don't have the same restrictions.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

    Help.  I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
    I have not made any changes to my machine. Help  - I can't get to my images

    Try restarting your system.
    If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

  • RCU-6002:The specified database does not meet the minimum requirement to

    I did all that is neccessary to let RCU to run but met the issues below. Really,this is not so good for me.pls has anyone a solution to this?
    RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
    RCU-6080:Global prerequisite check failed - Check requirement for specified database
    The database you are connecting is not a supported version. Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 in 11g. Refer to the certification matrix for supported DB versions
    Mcdonald gabriel

    Hi Dear,
    You need install the database version 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 with the database character set AL32UTF8.
    Best of Luck

  • This PC does not meet the minimum requirements for this version of iTunes

    Trying to update my iTunes, the installer gives the error message:
    "This PC does not meet the minimum requirements for this version of iTunes"
    I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
    This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today.  Hacked off big time :-\

    Well I've eventually managed a work-around.  Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
    What a ball ache.
    If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
    I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device!  Somehow lost it all off my iTunes in the process!
    TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly.  Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

  • I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. Tis does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

    I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. This does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

    Luis Sequeira1 wrote:
    I have run things that are unsupported too (like 10.3 Panther on a Wallstreet Powerbook, anyone remember those? )
    Hey Luis. I not only remember…I still have mine (OS 9)!  Works perfectly well…for some things; just need to be selective about what I ask it to do. (Also have its big brother Pismo running Tiger, which is still an extremely competent machine.) When I take them out of their cases, I'm still amazed at the G3's build quality.
    Russ

  • Installed graphics card does not meet the minimum requirements for AP...

    2006 MP with an HD 2600 and a 7300 GT card installed, 8 GB RAM, OS 10.4.11. Tried to install Aperture v1 from CD and got the error message "The installed graphics card does not meet the minimum requirements for Aperture" which disallowed upgrading to v1.5.6 because v1 would not install. So I downloaded and installed the v2 trial and got the same error message.
    The release lever on the 7300 card would not work so I left it in slot 1 for now rather than risk breaking the card. That put the HD 2600 card in slot 2, which is not optimum but I do not think it should cause problems.
    23" ACD connected to the HD 2600 card.
    Ideas? I perused the threads and found similar reports but no solutions.
    TIA
    -Allen Wicks

    Answering my own question, I moved the ACD connection to the 7300 card and v2 Aperture installed OK.
    Now I guess I need to get precise details on how to eject the 7300 card (mainly better directions than Apple's as to exactly what direction to force the release lever toward). I applied way more force than I am accustomed to and the card did not release.
    Comments appreciated, TIA.
    -Allen Wicks

Maybe you are looking for

  • Can not delete data from table which is queried in my stored procedure

    Hi, Anyone knows how to fix it: I have a table. In a stored procedure, I have a simple query running on this table. When I want to delete one record from that table, I got error message: ORA-04091: table *** is mutating, trigger/function may not see

  • Regarding Date Range parameter

    hello, in purchase order, i want to pass date range parameter. For eg . I want to fetch data from 21/11/2011 to 25/11/2011 how to pass parameter for this?? or do i need to create any formula?? if yes then how/??????? awaiting for soonest reply.

  • Cant access My Photo stream from macbook air.

    No direct access to My photo stream. I can access it fine from a PC. The "Web" option is not showing. Recent photos taken on mi iPad do get to the cloud ok. on latest Mavericks.

  • Why can't I text someone that deactivated their Facebook account?

    My son deactivated his Facebook account and now I can't text him from my iPhone via messages.  He can text me. How do I (or how does he) disconnect Facebook and Messages?  He also has iPhone 4. 

  • ANOTHER SELECTION SCREEN VALIDATION

    SUPPOSE SELECT-OPTIONS:S_DELIEVRY FOR LIKP-VBELN. HOW TO GIVE F4 FUNCTIONALITY FOR S_DELIVERY AT SELECTIONSCREEN ON VALUE REQUEST FOR S_DELIVERY. WHT TO CODE HERE?