Turbo memory Crashes vista and windows 7 when I install the driver (any available driver)
It goes like this .
when I first receive my t61 there was a vista installation and turbo me worked. I downgraded to XP and then I didn't use turbomem.
about half a year ago I tried running windows 7 beta and one of the turbo memory drivers worked but didn't operate the Readyboost or ready drive but only I was able to see the IMD-0 in the disk management so I mounted the IMD as a drive and run manually the ready boost on that drive.
I installed a newer version of windows 7 (Build 7600) and I tried that newer turbo mem drivers and the older drivers nothing works !
When I install the driver my comp crashed because ianvstor. That happens everytime IM trying to install the driver.
I tried installing vista SP2 and the same thing happens. I think my turbo mem chip is burned or something.
I also tried to replace hard drives and it didn't works.
it's really annoying that I have a component on the computer which I payed for it and it doesn't work.
i really hope this forum can help me to solve the problem.
i was going throw all the posts in google about turbo mem and none of them have my problem which I can't even install the driver.
ZetLAW wrote:
about half a year ago I tried running windows 7 beta and one of the turbo memory drivers worked but didn't operate the Readyboost or ready drive but only I was able to see the IMD-0 in the disk management so I mounted the IMD as a drive and run manually the ready boost on that drive.
I installed a newer version of windows 7 (Build 7600) and I tried that newer turbo mem drivers and the older drivers nothing works !
When I install the driver my comp crashed because ianvstor. That happens everytime IM trying to install the driver.
I tried installing vista SP2 and the same thing happens. I think my turbo mem chip is burned or something.
I also tried to replace hard drives and it didn't works.
it's really annoying that I have a component on the computer which I payed for it and it doesn't work.
i really hope this forum can help me to solve the problem.
Windows 7 is still in beta stages first of all, and second, Lenovo hasn't released any official drivers to work with Windows 7 yet. That will NOT happen unitl Microsoft offically releases Windows 7.
http://www.lenovo.com/us/en/windows7/index.html?ipromoID=wnb00492&
I would highly recommend sticking with the OEM version of your OS to eliminate problems of this kind! You want Lenovo to help you, but you're using a non-OEM operating system on your unit. Maybe someone else here in the forum might be able to assist you.
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks
Similar Messages
-
I downloaded the mountain lion from the app store and it downloaded. When i installed the mountain lion it said that the hd disk is broken and cannot be repaired, and the other disk doesnt have enough space! HELP and i cannot return to my desktop with the old sofware so i cant use my computer normaly
This error means that your hard drive is badly corrupt and cannot be repaired by Disk Utility. Since you say you don't have backups, this is very bad news. You may already have lost data irrevocably.
First order of business needs to be backing up whatever you can, but this may be difficult to do if the machine won't start up any more. See step 1 of the following post:
https://discussions.apple.com/message/21614450#21614450
Once you have backed up your data, you can address the other issues. -
HT1766 My iphone isn't beging recognized when I installed the newest update for itunes ***
The newest update from Itunes is not recognizing my Iphone and I have gone thru the troubleshooting procedures. Nothing is working. Apple should get their **** together.
Quit iTunes.
Disconnect your iPhone from your PC.
Go to Control Panel.
List installed software and remove the driver software for the iPhone. It's named something like "Driver or Device, Apple iPhone".
Restart Windows 7.
Connect your iPhone, make sure it the screen is not locked.
Windows should automatically re-install the driver software for the iPhone now.
If it has done that, start iTunes.
iTunes should now detect your iPhone again.
Kind regards,
emeu1 -
I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark -
Jre8 is not installing in Windows Vista and Windows 8.
Hai,
When I have tried to install jre8 (latest release) in Windows Vista and Windows8, it was not installed and shown the message "Installation Failed" at the end.
Can anyone suggest me How to install jre8 in Windows Vista and Windows8.
Thanks & Regards,
Gowrisankar C.Try the instructions on this page. They were written at the time of Java 6 but still apply to 7 and 8
Error: The wizard was interrupted before Java(TM) 6 update could be completely installed.
Once you run the MS tool, please install using the offline installer from:
https://www.java.com/en/download/manual.jsp
-Roger -
Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7
There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7. A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip 34 KBJust want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!
-
How to dual install Vista and Windows 7?
Hi,
I have a question about setting up windows 7. But Im trying a slightly different approach. I have a drive on my Mac Pro that has Windows Vista on it. But I would like to put Windows 7 on it too. I dont know if i have to partition the drive to do this or can i just install it along side Vista? Thing is before i installed Vista I used disk utilities to partition the drive to 2 equal partitions but when I went on it to put Vista on it somehow Vista took the whole drive. So i have Vista on there and all set up but now I'd like to add Windows 7 without destroying Vista...How can I do that? Do i have to use the Mac OS and partition it and install or is this something I should do from the Vista side?None. You have everything you need.
Windows 7 DVD
Vista
And if you want another Paragon CampTune for resizing partitions.
For backup, Vista, no need to buy Paragon or Acronis. WinClone is free and handy too.
Trouble with Macs, or any computer, there are always different ways to get to same place.
Backup, and then try, that is all anyone can do. I had Vista SP1 for work, Vista SP2 beta for testing, and Windows 7 beta to give it a shot, and I like W7 better.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0 -
have Mozilla Firefox as my browser vs Internet explorer. This morning when I tried to open Mozilla after several attempts it said it had crashed with a window that I could check the box to send the report to Mozilla but it wont even let me send the report I can get on the internet with explorer but dont want to go back to that so would I just delete mozzila and start all over or will that not clear up the problem? Im lost help
Have you tried any of the solutions in [[Firefox crashes when you open it]]?
-
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor
Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support -
after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8
You might want to post this over in the iTunes Match forum.
-
cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...
You should first uninstall iTunes completely.
This is not an easy task!
Read this article on how to remove iTunes completely
http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
Then download the latest version of iTunes for your Windows Version and install it. -
I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing. After letting it run for 3-4 minutes I kill the task. What can I do to get the reader installed on this machine? I've tried using chrome, firefox and explorer and get the same results with each.
Try the offline installer from http://get.adobe.com/reader/enterprise/
-
i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help pleaseThanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
I have a version 7.0.4. I can't connect to the server. My capacity is 13.5 with 10.4 GB available. Diagnostics and usage data, when scrolled to the bottom, tells me I have low memory.How cani fix this?
Clear Safari, close all apps on the iPad and reboot. Then see if you can connect.
Go to Settings>Safari>Clear Cookies and Data.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to each app then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you still can't connect to the internet, you need to do some more troubleshooting with the network connection, but report back with more details if that doesn't work and don't just repeat the question in the text box are that you have to describe the problem. That serves no purpose at all.
Maybe you are looking for
-
Error in Authorization even after giving Colon authoriztion to users
Dear Experts We have built a query which is having Sum GT function used and also Constant for some characterstics. But when we execute the query the user is getting not authorized message. If i run the query without the SUM GT and Constant RKF and C
-
earlier my itunes told me that my files were corrupted and I needed to restore, so I did. In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod
-
IPhoto Rotating Imported Pictures Randomly
Hey, Ive been having this problem for a while through multiple Mac OS updates/Phone updates. I've got a 2008 Macbook Pro (Ancient I know) and an IPhone 5. It is running the latest Mavericks OS and the phone is up to date. Anyway, it always seems t
-
The finder says I have 25 gigs of movie files. When I serch for .mov or .avi, I get just a mb's of files. How do I find the rest?
-
I am having 2 problems with my Z1 phone
Firstly, everyone who calls me (or whom I call) on my cell complains about getting an annoying echo on their end. So I'm not being bothered by an echo, but everyone else is. My husband is threatening to never call me or anwer my calls anymore. Any