Turn a string that shows hex data in normal format, into a string that shows the same data in hex format

I have a string of arbitrary length - say, 1AB1C0 - in normal format. I would like to have a function which takes that string in, and outputs the same exact characters, but in hex format. So the input will read 1AB1C0 in normal string format, and the output will read 1AB1C0 in hex string format.
I am doing this because I have found the end device works better if I send the bytes as a hex string vs. as an array of U8. Furthermore, I manipulate a lot of byte streams in my program, and I find the string parsing tools less cumbersome to use vs. the byte array parsing tools - however, they only work on the strings as they appear in normal mode. So I have reasons in different parts of my program to have the string in normal vs. hex formats; but I cannot figure out any remotely elegant way to cast from one to the other.
Solved!
Go to Solution.

CraigRem wrote:
So the input will read 1AB1C0 in normal string format, and the output will read 1AB1C0 in hex string format.
Well, you need to scan the hex formatted string two bytes at a time to an U8 numeric and then cast it back to a string. There are many ways to do that, here are two possibilities. (Mkae sure to use the correct representations as labeled).
(I still don't quite understand your reasoning why you need this).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
NormalToHex1.png ‏12 KB

Similar Messages

  • I have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

    i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

    Might be corrupted preferences ..
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.desktop.plist
    Click Go then move the com.apple.desktop.plist file to the Trash.
    Restart your Mac and try changing the desktop photo.

  • BAM Combo Chart showing data in 2 graphics for the same data object

    Hi all,
    I’m trying to show 2 views of the same data object in a Combo Chart (e.g. orders created today as a bar chart and orders created yesterday as line chart grouping by hour of day). It was pretty easy adding the same data object twice but the data type of the horizontal axis seems to be lost and it gets sorted as a simple string, leading to strange grouping of the hours with 05:00 representing 5 AM sided with 05:00 representing 5 PM. Also, I’m not able to format such fields using the format values tab.
    Is using the same data object two times in the same report an unsupported scenario?
    Thanks,
    Daniel

    why you want to add the same data object twice? Your use case can be achieved with single data object only.
    1) Create combo chart and select the data object.
    2) On "Choose data fields" page group by datetime field.
    3) You will see UI changed to 3 sections - left one with "Group by" section, middle with "Chart values" and right one with "Time Groups".
    4) In the right "Time Group" section, uncheck checkbox for continuous time series. Time Unit as hour, quantity as 1.
    5) In middle "Chart values" section ,select the fields that you want to display as chart values and respective chart types , in your case orders created today as a bar chart and orders created yesterday as line chart.
    5) Click Next and Finish.
    6) Then you can go to Value format tab, and change the format for the datetime field as timeunit and required format.

  • I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.  Please help!

    I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken.   I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto.  I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken.  I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported.  I greatly appreciate some assistance!

    All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
    The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
    Regards
    TD

  • Query result shows the same data twice

    Hello All,
    I've created UDFs like Supplier Name, Supplier Address, and (Excise Details like)Supplier ECC No,
    Supplier Range.
    And I've created Query for Supplier Name and Supplier Address, and I assigned to FMS, Its working Correctly.
    I've created Query for Supplier ECC No. the Query is,
    SELECT  T0.[ECCNo],T1.[CardName]
    FROM CRD7 T0  INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    WHERE T0.[ECCNo]  Like  '[%]'
    I saved the Query, and assigned to FMS.
    At this stage (i.e. Query for Supplier ECC No.) the above Query showing the same data twice.
    Please suggest to rectify the problem.
    Thanks,
    Pratheeviraj

    You can get rid of the duplicates by changing the query to
    SELECT DISTINCT T0.ECCNo,T1.CardName
    FROM CRD7 T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    WHERE T0.ECCNo Like '[%]'
    But it is always worth understanding why you are getting multiple records to check that you are getting back what you want.  I think you may be seeing this because CRD7 can have multiple records for a business partner - maybe one for each of 'pay-to' and 'ship-to' address?

  • Sub Report in Table, always showing the same data

    I created a main report with data from a dataset. The DataSet has a column: @Region_ID. The Main Report is Page-Grouped by this @Region_ID and shows a tablix with some datarows foreach region. 
    I now want to include a subreport into the table and pass the parameter @region_ID to the subreport, which also calls a procedure including the passed @region_ID. I set the @region_ID-Parameter to "always refresh"
    I added a textbox on the subreport to display the values which has been passed to the subreport. 
    I now have a multipage report, with a page for every region. The subreport displays various @region_ids in the textbox, but the data for the subreport itsself, shows the same data on every page. It seems like it has called the procedure only once, with the
    first @region_id, and now displays this data on every page, allthough it does not match.
    Any suggestions what I did wrong?

    Hi tkrasinger,
    According to your description, you have the issues on displaying the parameter in subreport. It only shows the first value of the parameters. Right?
    In Reporting Services, when we execute a procedure with parameter, this procedure will only be executed one time. This is the reason why it shows the same value in your subreport.
    In this scenario, we can just right click on the textbox of region_id, go to
    Texobox Properties -> Action -> Go to report. Select the subreport, add the region_id as parameter in
    Use these parameters to run the Report. When you click on the textbox, the region_id will be passed to the subreport. So that the value will be displayed dynamically in the subreport. 
    Reference:
    Add a Subreport and Parameters (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • I currently have one input but need to run two loops. I cannot get the two while loops to run so that they both pick up the same data, they are both picking up alternate samples. How can I get them to both pick up all of the values?

    The system I am trying to create calculates a number of values based on an input. I need to make the calculations and display the values for an entire production run and for each hour. The only way I know to do this is to create two while loops, one looking at all the values that are received and one looking only at the values for hour long periods.
    Any help would be great.
    Thanks
    RossH

    Why do you think that you have to have two loops to accomplish this task? Why not use one loop and accumulate the same data into two data sets based on the two sets of criteria?

  • My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

    my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

    Hello gpbondi,
    The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
    Download past purchases
    http://support.apple.com/kb/HT2519
    Cheers,
    Allen

  • Query for retreiving table names that have the same data

    Hi,
    Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
    Thanks in Advance,
    Balaji.

    What about...
    WITH manager_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id
      AND   m.name = :P_MANAGER)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    ), all_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    SELECT a.*
    FROM   manager_list m,
           all_list a
    WHERE  m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
    Cheers
    Ben

  • How do I set all photos in a project to the same date (rather than simply time-shifting)?

    I have a bunch of old scanned photos in Aperture (current version - 3.5.1), and am trying to tidy up the metadata, especially the dates.
    This is turning out to be quite a task, as the date gaps between scans are all over the place. For example, in one project I might have photos scanned between 2004 and 2007 that all took place on one day in 1999.
    This means the native "adjust date and time" function in the metadata menu doesn't work, as it is a little too clever in its timeshifting. If I highliht the whole project and change it all to 1 June 1999, the 2004 shots get changed to that date but the 2007 scans are dated 2002, with Aperture "cleverly" preserving the inaccurate three year gap in the original scans' metadata.
    This is making the process of fixing my data far more arduous than it needs to be.
    I feel like my situation can't be that unusual, and their must be a way to override this behaviour. I'm not fussy about preserving logical time gaps between shots  but I'd like them to have the right year and month (so a "dumb" solution that gave them all idntical date and times would be fine).
    Can anayone help? Thanks in advance!

    What is your Aperture version?
    If it is compatible with iPhoto, open the Aperture library in iPhoto and use iPhoto's Batch Change to adjust the date of your scans:  (File > Open Library in iPhoto)
    In iPhoto select the photos in the event and go to the main menu bar:
    Photos  > Batch Change > Set Date:
    Select the initial date and time of your photos and a very small gap, e.g. 1 second. All photos will set to the same date, stepped by one second to preserve their time order.
    Afterwards switch back to Aperture using "File > Open Library in Aperture).
    this works very well with Aperture 3.5.1 and iPhoto 9.5.1.
    -- Léonie

  • How do I delete duplicate songs in my iTunes? I have hundreds and I don't want to delete them one by one. They were all added on the same date, so sorting by the date won't help.

    How do I delete duplicate songs in my iTunes? I have hundreds and I don't want to delete them one by one. They were all added on the same date, so sorting by the date won't help.

    Hi, if this is in regards to your library simply open up itunes and do the following steps:
    Click File
    Scroll down to "show duplicates"
    A list will then appear of your duplicate song titles.
    Be sure to CAREFULLY review each song to make sure it is a duplicate ( as I have some music that is the same song but live, acoustic etc...)
    Proceed to manually delete each song from the list and leave alone any song that you wish to keep.
    Best of luck,
    Cait

  • How to display the same data simultaneously on both a graph and a table.

    I am a beginner.
    I would like to display a reference line(?) on dvt:graph
    whenever a row is selected on the related af:table.
    I would like to show the same data,
    simultaneously on both a graph and a table.
    Is it possible?
    I hope for a good hint. ^-^...

    Hi,
    yes. It depends on how the reference line is getting its data. If e.g you can use EL to bind it to ADF bindings then attribute bindings for attributes of the iterator that also renders the table are enough to get the current selection.
    If this is not possible you can follow http://thepeninsulasedge.com/frank_nimphius/2007/07/02/adf-faces-rc-programmatically-executing-a-button-method-using-javascript/ and create a selection listener for the table to programmatically manipulate the graph
    Frank

  • Why does PSE 10 Organizer jumble up photos on the same date from different locations ?

    I have PSE 10 installed on a PC with Windows 7. My camera is a Nikon D90 using a Sandisk 8 gb SD card. When I take photos at different locations on the same date and download them into the Organizer , instead of keeping the photos from the different locations together by location, it jumbles them all up. It does not keep them in order by time taken from first to last for that day , it just mixes them all up in random order. Why ?

    Hi Lyndy,
    When you use Albums and Keyword Tags, you aren't moving the images around (they stay in their folders) - you just look at them differently.
    What you can try is this:-
    1) select one of your folders in folder view so that it displays all of those images in filename order
    2) click on the instant album button (to the top right of the thumbnails)
    This will generate an album with the same name as the folder
    3) Now switch to Thumbnail view
    4) click on the new albumb name on the right side
    Now, all the images should be in date/time order - you may have adjust the options
    The real power of the Keywrd Tags is the many different ways you can look at the images.
    If you have a Keyword Tag structure like this:-
    Places
         Scotland
                Holyrood
                Britania
    Then if you assign the Holyrood and britania tags to the appropiate photos, there are various ways of viewing the photos.
    Selecting just Holyrood would show only the Holyrood ones
    Selecting Scotland would show both Holyrood and Britania ones.
    The only limit seems to be your own imagination
    I hope that gives you ideas rather than adding confusion
    Brian

  • Why have all my emails now got the same date in Mail?

    All incoming and outgoing emails show the same date in the list of mailboxes and the "sort by" columns. The date is 01/05/2012. How can I change this to show the "real" dates? This has only happened in the past 2 weeks.
    I'm no able the start a discussion in the Mail community, so I hope this is the appropriate alternative.
    Thank you very much.

    Go to Settings/Messages/Receive at/ and disable the mail address or phone number for the device that your sister is using.
    Also have a look here: iMessage on iPad and iPhone Explained and De-Mystified

  • All photos have the same date

    I have a very weird problem with iPhoto 6. A while ago, all pictures showed up with the same date (2006-07-08). All pictures and all rolls show up with this date, even newly imported ones. The EXIF data is not the problem, because when I sort them by date, they are sorted right (still showing up the same date though). I tried rebuilding the database (holding down option-command at start up) but that didn't help. I've also tried deleting the iPhoto plist file, but that didn't work either.
    I read in an old post here from last year that a guy had the same problem, however when he imported the images to another user, they showed up right. That makes me think there's some problem in the iPhoto preferences, but I'm not sure what preferences I can safely delete without making the program unusable.
    Any ideas?

    Seems I got it from another thread here at the discussion boards. In the international preference panes under dates, it was set to custom. I changed it to the standard setting of my country and after that iPhoto displayed the rolls and the pictures correctly.

  • Multiple MM schedule lines for the same date

    Hello All Gurus,
    I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
    02/11/2010 - 40
    02/11/2010 - 40
    02/11/2010 - 40
    Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
    Please let me  know. I would be very much thankful to you.
    Thanks and Regards,
    Umakanth

    Hi,
    Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
    Regards,
    Dominik Modrzejewski

Maybe you are looking for

  • How to create Header and Footer  template

    Hi, I am wondering if this is possible, if yes , can some help me please? At present we have preprinted stationary for invoices and now the plan is to get rid of preprinted stationary and print header and footer via oracle reports directly. The addre

  • How can I use a different web page in the tabs

    I'm getting this bing thing and I cant remove it and change it. Ive tried going to "about:config" and changing the browser url and keyword.URL but it wont change.. Very unhappy and thinking its time for a change.

  • How to show grand total at bottom in Pivot view?

    Hi All, How to show the report Grand total at bottom in pivot table?Plz help. Regards, Vaishnavi

  • Distribute to Multiple Locations on File System

    Hi, Is there any way to schedule a publication to multiple file system directories at the same time?  When I use the "File System" destination option, it only allows for one directory. I'd like to be able to publish to multiple directories without ha

  • Error: "Mobile java client attributes not maintained" while activating DO

    Hi All, i got error while activating the Data Object: "Mobile java client attributes not maintained". how to resolve this error, and why this error is coming? I am migrating the MI 2.5 application into the MI 7.1 application.In new MI 7.1 application