Turn aluminum into white

Anyone Know of an inexpensive way to make the new aluminum imacs white like the 3rd gen iMacs. Have seen a couple of sites who can make them 24K gold, platinum and others virtually any color but the option is around $400. There's a plastic snap on solution for $50 which would be nice and do the trick, but they only make black,red,aqua and pink. Seen some skin decals on Ebay, but they don't offer white either besides it looks like bit of a chinsy solution anyway.
Seem to have run out of options for now and was looking for some fresh ideas. A bit squemish about buying a refurb online and would prefer factory fresh but dissapointed in the then new design and liked the white ones much better.

If you buy a refurb from Apple, it should look new and it has the same warranty. I think they are actually more reliable, because any problems have been fixed and it has been fully retested. I don't think the "new" ones fresh off the assembly line get a full test before they are boxed up and shipped.
I recently bought a refurb 17-inch while iMac (2006 model) from the Apple Store, and it's been perfect. Looked new with no operational issues. I like the smaller size, which is no longer available, yet for $849 I got a 2.0 GHz Core 2 Duo machine with decent dedicated video.
The only minor downside was that it came with iLife 2006, because that's the version on the original disks (check description to see what's included). It also had Tiger, but included the "drop-in" upgrade to Leopard on a separate disk, which I like because I have a choice of running Tiger or Leopard. You also get brown-colored packaging with "certified Refurbished Product" label, but who cares about that...

Similar Messages

Media Encoder turns audio into white noise!

I'm running CS5.5 on an intel Mac 10.6.5, and i have been having problems encoding to flv.
All my videos are edited the same way, and using the same formats etc, yet recently I have found that when converting to .flv, some will work fine, and others will have the audio replaced by white noise.
I cannot figure out what the problem could be. I have also tried using the CS5 version and that is having the same issues.
Checking through the video specs, it appears that the one difference is that the ones which worked fine are all Apple ProRes 422 HQ files, and the ones which failed are Apple 10bit Uncompressed. The strange thing is the audio is the same for both. Yet when the encode problem happens, the video for both is fine, its just the audio where the problem appears.
Anyone else seen this problem? or better still have a solution?
adam

I've answered it myself.
The problem relates to using Uncompressed 10bit movie files...seems the CS5 versions have a problem handling the audio on these. The solution for me was to run the files through Compressor first and change them to Apple ProRes422, before running them through AME.
works every time now!
now if only i could find the bug report form....

I scanned some black and white negatives into my computer (iMac) where they were stored aas positives on the hard disc. When I import them to iPhoto they turn back into negatives. How do I change them into positives for printing?

I have scanned some black and white negatives into my computer(iMac) where they are stored on the hard disc as positives.When I import them into iPhoto to print they turn back into negatives.How do I turn them back into positives?

That's because you scanned them as B/W photos and iPhoto 08 doesn't support the grayscale color profile. You can either rescan them as color photos or export them as originals out of iPhoto to a folder on the desktop and applhy this Automator application, Convert to JPG and Embed sRGB Profile, on them and then remimport into iPhoto. You can download it from Toad's Cellar . Be sure to read the warning on the website about not applying it on your only copies.
OT

Laserjet 2605dn - how do I turn it into a black and white only printer?

How do I turn it into a black and white only printer?
I just bought ink replacement for a whopping $563 which is way too much. My ink supplies have run out. I replaced the Balck ink but the printer is stuck in the "replace supplies" error w/ orange light flashing. Is there any way to re-configure the printer to only use as a B/W printer?

Found myself in the same boat. Try this link, worked for me
ebay review
As for printing in B&W only, I don't think this printer has that capability, at least from what I've read.
Message Edited by j_s on 02-06-2009 08:51 PM

I scanned a black & white negative. Can I turn it into a positive in PS?

I scanned a black & white negative. Can I turn it into a positive in PhotoShop?

Check System Preferences>Accessibility and make sure 'invert colours' isn't ticked under 'Display'.

I have a CanoScan Lide 700F scanner ,how do I scan Black and white neg.and turn them into positives?

I am scaning all old pictures, docts, slides ,but I have alot of b&w negs verious sizes, how can I turn them into b&w positives??

Hi Teddy.
The MP Navigator EX software that was bundled with your CanoScan LiDE 700F can be used to scan your black and white negatives. To use the MP Navigator, please follow these steps:
1. Start MP Navigator EX and open the Navigation Mode screen.
2. Point to Scan/Import and click Film.
3. Place the film on the Platen.
4. Click Specify... to set the document size and scanning resolution as required.
5. When setting is completed, click OK.
Important
Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again.
Note
To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box.
6. Click Scan. Preview scan starts. When preview scan of the film is completed, the preview image appears.
Important
If a message for calibration appears, remove the film, then place the Film Adapter Unit over the first frame of the Film Guide and click OK.
7. When the calibration is completed, follow the on-screen instructions to load the film into the Film Guide, then click OK.
Note
Preview image does not appear when the Preview before scanning checkbox is not selected in the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
8. Select the checkbox of the frame and click Scan. When scanning is completed, the Scan Complete dialog box opens.
9. Select Scan or Exit. To scan another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select Exit to end.
The scanned images appear in the Thumbnail window.
10. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc.
Note
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
11. Save the scanned images.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Audio files turned into white noise

I just opened a couple of session I kept on my firewire audio drive and for some reason some of the audio files have been turned into white noise and obviously rendered unusable. Has this ever happened to anyone? If so can you do anything to sort it out?
Some of those where really important so I would really appreciate if someone had a solution.
Thanks
Luc

Creepy!!!

How to turn a black object into white on an image?

Hi,
on a picture. i can turn a blue object into yellow, green or any other color. and vice versa.
To do that i know 5 different ways, or combination of those methods.
1- Hue/Saturation
2- Color Balance
3- Selective Color
4- Replece Color (Similar to Hue/Saturation)
5- select the area, create a new layer, paint the selected area on new layer, blend the new layer with "linear burn".
but when it comes to black, i can't change the black to another color with any of the ways above. So i was wondering if it is possible to turn a black object into white without killing the texture. Or cleaning the object from colors, making it colorless.
best way i know so far is playing with "exposure" settings. but this time the objcet on the image is becoming blure and loosing its texture.
Here is the object i m trying to make white (or colorless). Do you know any way to do it?
i need to make that shoe as white/colorless as this one below.
Thanks!

Thanks for your help. But i wish it was that easy
i can simply select the whole shoe and do ctrl+i (short cut to invert) to invert the dark colors to white. But while it turns the dark colors into white it also turns white parts into black. which i don't want to.
it doesnt have to be plain white, i need it to be as white as possible then i can use it as a template to try different colors on it. (like the second photo i sent)
If i do it with "invert" the when i paint it the shoe doesnt look real, its because with "invert" option, light parts becomming shadow, and shaddows becoming light.

Colored Pictures Turning Black and White in Certain Files (PSE 9.0)

Hey guys, how's it going?
I'll try to keep this breif, but it may take a little while to explain. I've been getting a problem with PSE 9.0 where an image or layer that is in color suddenly turns black and white when I paste it into an open file. It's a lot easier to explain with pictures, so here you go.
Figure 1
Figure 2
(Before anything else is said, I would like to point out the reasoning behind relating a middle-finger, a hammer and sickle, and a pony from My Little Pony: Friendship is Magic into a single image; it's a parody project I'm working on. It's about 30 times weirder out of context, trust me.)
As you can see, the source imagery with "APPA JAK" on it (figure 1) is in full color, but when I pasted it onto the layer with the hammer and sickle, it turned black and white. This has become the same with a few other images I have found, but I couldn't find any reliable way to recreate the problem. The problem is also the same weather I find the pictures from the internet, copy those to my clipboard, and paste them or simply paste them from my computer.
If you need any more information (dxdiag, settings, etc. etc.) feel free to ask, and thanks in advance for helping me!

Just a guess because I don't have the original images to play with, but the hammer and sickle is a grayscale image so images posted into it become grayscale.
Use Image / Mode / RGB Color to change the target image to color before pasting anything into it.
Alternatively, use File / New to create a new image that is full color and paste everything into it.

Why are my duotone images turning black and white when put in indesign?

why are my duotone images turning black and white when put in indesign?
I have been playing duo and montotone images into indesing with no trouble. Then all of a sudden as I placew them they go black and whitre. I have tried everything from re saving, re making in photoshop and differant colours et5c. But nothing seems to wrok. The images already in my document arew fine it is just new ones. If someone could help that would be great

Can you start a new document and then load one of the duotones known to be good in the working file and have it correct? If so, try one of the duotones known to be bad in the working document in the new file. Does it work?
If no to either suggestion, can you share one of the images known to be good and one known to be bad? ZIP 'em up and upload to dropbox and plop a link here. Or, to keep the file sizes down, you can quickly make a new set and provide those.
As well, the ID version and OS info would probably be helpful.
Take care, Mike

Screen fades from black to grey then into white.

Ive had my iphone for 3 1/2 weeks Out of nowhere my iphone 4s got all weird. My screen fades from black to grey into white. ive tried to reboot it it doesnt work. i also pressed the middle button and the power button for like 10 seconds and nothin happens. it turns off sometimes when i press the two buttons.
Then it just turned on like it supposed to, a few hours later it happened again. it all happened yesterday. then today i got on itunes to restore the phone to see if it works better then then while it was syncrnizing eerything into the phone it happened once again. i really dont know what to do! has anyone had the same or a similar problem? would it work if i just restore it and just make it a "new" phone ?
sorry my grammer isnt the best lol

While in the B/W desktop go to the System/Accessability preference pane and check to see if this checkbox is selected:
If it isn't toggle it on and then off again and see if there's any change.

My adobe illustrator is in a foreign language. how can i turn it into english?

my adobe illustrator is in a foreign language. how can i turn it into english?

First please remember this is a public forum. If you are going to respond to the thread via e-mail please remove your signature prior to responding.
To resolve your difficulties you will need to go to the Language & Text preference pane. Once there click on Edit List and remove all languages besides English. You will then likely need to remove and reinstall the trial as the language setting I believe is set during the installation process.

HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE YOUR LIFE!

HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
YOUR LIFE!
I found this on a bulletin board and decided to try it. A
little while back,
I was browsing through newsgroups, just like you are now, and
came across an
article similar to this that said you could make thousands of
dollars within
weeks with only an initial investment of $6.00! So I thought,
Yeah right,
this must be a scam,but like most of us, I was curious, so I
kept reading.
Anyway, it said that you send $1.00 to each of the 6 names
and address
stated in the article. You then place your own name and
address in the
bottom of the list at #6, and post the article in at least
200 newsgroups.
(There are thousands) No catch, that was it. So after
thinking it over, and
talking to a few people first, I thought about trying it. I
figured: what
have I got to lose except 6
stamps and $6.00, right? Then I invested the measly $6.00.
Well GUESS
WHAT!!...
within 7 days, I started getting money in the mail! I was
shocked! I figured
it would end soon, but the money just kept coming in. In my
first week, I
made about $25.00. By the end of the second week I had made a
total of over
$1,000.00! In the third week I had over $10,000.00 and it's
still growing.
This is now my fourth week and I have made a total of just
over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00,
and 6 stamps,
I have spent more than that on the lottery!! Let me tell you
how this works
and most importantly, why it works....Also, make sure you
print a copy of
this article NOW, so you can get the information off of it as
you need it. I
promise you
that if you follow the directions exactly, that you will
start making more
money than you thought possible by doing something so easy!
Suggestion: Read this entire message carefully! (Print it out
or download
it.) Follow the simple directions and watch the money come
in! It's easy.
It's legal. And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is
not illegal; and
it is virtually no risk - it really works!!!! If all of the
following
instructions are adhered to, you will receive extraordinary
dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and
$50,000 or more can
be yours in 20 to 60 days. This program remains successful
because of the
honesty and integrity of the participants. Please continue
its success by
carefully
adhering to the instructions. You will now become part of the
Mail Order
business. In this business your product is not solid and
tangible, it's a
service. You are in the business of developing Mailing Lists.
Many large
corporations are happy to pay big bucks for quality lists.
However, the
money made from the mailing lists is secondary to the income
which is made
from people like you and me asking to be included in that
list. Here are the
4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the
following on each piece
of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
$1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill
will not be seen
through the envelope (to prevent thievery). Next, place one
paper in each of
the 6 envelopes and seal them. You should now have 6 sealed
envelopes, each
with a piece of paper stating the above phrase, your name and
address, and a
$1.00 bill. What you are doing is creating a service. THIS IS
ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are
paying for it!
Like most of us I was a little skeptical and a little worried
about the
legal aspects of it all. So I checked it out with the U.S.
Post Office
(1-800-725-2161) and they
confirmed that it is indeed legal! Mail the 6 envelopes to
the following
addresses:
Mailing Adresses
Stephanie Hicks
1283 Evening Canyon
Henderson NV 89014
Ross Wilson
202 Belmont Dr.
Thibodaux, LA 70301
James Small
4690 Sierra St.
Riverside, CA 92504
Thomas G.
P.O. Box 591939
Houston, TX 77259
S. Parker
159 Main Street
Dadeville, Alabama 36853
A. Wyman
9734 Landowne ct.
Orlando, FL 32817
STEP 2: Now take the #1 name off the list that you see above,
move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
as number 6 on
the list.
STEP 3: Change anything you need to, but try to keep this
article as close
to
original as possible. Now, post your amended article to at
least 200
newsgroups. (I think there are close to 24,000 groups) All
you need is 200,
but remember, the more you post, the more money you make!
This is perfectly
legal! If you have any doubts, refer to Title 18 Sec. 1302
& 1341 of the
Postal lottery laws. Keep a copy of these steps for yourself
and, whenever
you need money, you can use it again, and again.
PLEASE REMEMBER that this program remains successful because
of the honesty
and integrity of the participants and by their carefully
adhering to the
directions. Look at it this way. If you are of integrity, the
program will
continue and the money that so many others have received will
come your way.
NOTE: You may want to retain every name and address sent to
you, either on a
computer or hard copy and keep the notes people send you.
This VERIFIES that
you are truly providing a service. (Also, it might be a good
idea to wrap
the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each
post is downloaded and the directions carefully followed, six
members will
be reimbursed for their participation as a List Developer
with one dollar
each. Your name will move up the list geometrically so that
when your name
reaches the #1 position you will be receiving thousands of
dollars in
CASH!!! What an opportunity for only $6.00 ($1.00 for each of
the first six
people listed above) Send it now, add your own name to the
list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
Step 1) You do
not need to re-type this entire letter to do your own
posting. Simply put
your cursor at the beginning of this letter and drag your
cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at
the top of the
blank page. From the 'edit' menu select 'paste'. This will
paste a copy of
the letter into notepad so that you can add your name to the
list.
Step 3) Save your new notepad file as a .txt file. If you
want to do your
postings in different settings, you'll always have this file
to go back to.
Step 4) Use Netscape or Internet explorer and try searching
for various
newsgroups (on-line forums, message boards, chat sites,
discussions.) Step
5) Visit these message boards and post this article as a new
message by
highlighting the text of this letter and selecting paste from
the edit menu.
Fill in the Subject, this will be the header that everyone
sees as they
scroll through the list of postings in a particular group,
click the post
message button. You're done with your first one!
Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and
post away, after
you get the hang of it, it will take about 30 seconds for
each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200**
That's it! You will begin receiving money from around the
world within days!
You may eventually want to rent a P.O.Box due to the large
amount of mail
you will receive. If you wish to stay anonymous, you can
invent a name to
use, as long as the postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
part: Out of
200 postings, say I receive only 5 replies (a very low
example). So then I
made $5.00 with my name at #6 on the letter. Now, each of
the 5 persons who just sent me $1.00 make the MINIMUM 200
postings, each
with my name at #5 and only 5 persons respond to each of the
original 5,
that is another $25.00 for me, now those 25 each make 200
MINIMUM posts with
my name at #4 and only 5 replies each, I will bring in an
additional
$125.00! Now, those 125 persons turn around and post the
MINIMUM 200 with my
name at #3 and only receive 5 replies each, I will make an
additional
$626.00! OK, now here is the fun part, each of those 625
persons post a
MINIMUM 200 letters with my name at #2 and they each only
receive 5 replies,
that just made me $3,125.00!!! Those
3,125 persons will all deliver this message to 200 newsgroups
with my name
at #1 and if still 5 persons per 200 newsgroups react I will
receive
$15,625,00!With an original investment of only $6.00!
AMAZING! When your
name is no longer on the list, you just take the latest
posting in the
newsgroups, and send out another $6.00 to names on the list,
putting your
name at number 6 again. And start posting again. The thing to
remember is:
do you realize that thousands of people all over the world
are joining the
internet and reading these articles
everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
and see if it
really works?? I think so... People have said, "e;what if the
plan is played
out and no one sends you the money? So what! What are the
chances of that
happening when there are tons of new honest users and new
honest people who
are joining the internet and newsgroups everyday and are
willing to give it
a try?
Estimates are at 20,000 to 50,000 new users, every day, with
thousands of
those joining the actual internet.
Remember: play FAIRLY and HONESTLY and this will really work.

HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
YOUR LIFE!
I found this on a bulletin board and decided to try it. A
little while back,
I was browsing through newsgroups, just like you are now, and
came across an
article similar to this that said you could make thousands of
dollars within
weeks with only an initial investment of $6.00! So I thought,
Yeah right,
this must be a scam,but like most of us, I was curious, so I
kept reading.
Anyway, it said that you send $1.00 to each of the 6 names
and address
stated in the article. You then place your own name and
address in the
bottom of the list at #6, and post the article in at least
200 newsgroups.
(There are thousands) No catch, that was it. So after
thinking it over, and
talking to a few people first, I thought about trying it. I
figured: what
have I got to lose except 6
stamps and $6.00, right? Then I invested the measly $6.00.
Well GUESS
WHAT!!...
within 7 days, I started getting money in the mail! I was
shocked! I figured
it would end soon, but the money just kept coming in. In my
first week, I
made about $25.00. By the end of the second week I had made a
total of over
$1,000.00! In the third week I had over $10,000.00 and it's
still growing.
This is now my fourth week and I have made a total of just
over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00,
and 6 stamps,
I have spent more than that on the lottery!! Let me tell you
how this works
and most importantly, why it works....Also, make sure you
print a copy of
this article NOW, so you can get the information off of it as
you need it. I
promise you
that if you follow the directions exactly, that you will
start making more
money than you thought possible by doing something so easy!
Suggestion: Read this entire message carefully! (Print it out
or download
it.) Follow the simple directions and watch the money come
in! It's easy.
It's legal. And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is
not illegal; and
it is virtually no risk - it really works!!!! If all of the
following
instructions are adhered to, you will receive extraordinary
dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and
$50,000 or more can
be yours in 20 to 60 days. This program remains successful
because of the
honesty and integrity of the participants. Please continue
its success by
carefully
adhering to the instructions. You will now become part of the
Mail Order
business. In this business your product is not solid and
tangible, it's a
service. You are in the business of developing Mailing Lists.
Many large
corporations are happy to pay big bucks for quality lists.
However, the
money made from the mailing lists is secondary to the income
which is made
from people like you and me asking to be included in that
list. Here are the
4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the
following on each piece
of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
$1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill
will not be seen
through the envelope (to prevent thievery). Next, place one
paper in each of
the 6 envelopes and seal them. You should now have 6 sealed
envelopes, each
with a piece of paper stating the above phrase, your name and
address, and a
$1.00 bill. What you are doing is creating a service. THIS IS
ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are
paying for it!
Like most of us I was a little skeptical and a little worried
about the
legal aspects of it all. So I checked it out with the U.S.
Post Office
(1-800-725-2161) and they
confirmed that it is indeed legal! Mail the 6 envelopes to
the following
addresses:
Mailing Adresses
Stephanie Hicks
1283 Evening Canyon
Henderson NV 89014
Ross Wilson
202 Belmont Dr.
Thibodaux, LA 70301
James Small
4690 Sierra St.
Riverside, CA 92504
Thomas G.
P.O. Box 591939
Houston, TX 77259
S. Parker
159 Main Street
Dadeville, Alabama 36853
A. Wyman
9734 Landowne ct.
Orlando, FL 32817
STEP 2: Now take the #1 name off the list that you see above,
move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
as number 6 on
the list.
STEP 3: Change anything you need to, but try to keep this
article as close
to
original as possible. Now, post your amended article to at
least 200
newsgroups. (I think there are close to 24,000 groups) All
you need is 200,
but remember, the more you post, the more money you make!
This is perfectly
legal! If you have any doubts, refer to Title 18 Sec. 1302
& 1341 of the
Postal lottery laws. Keep a copy of these steps for yourself
and, whenever
you need money, you can use it again, and again.
PLEASE REMEMBER that this program remains successful because
of the honesty
and integrity of the participants and by their carefully
adhering to the
directions. Look at it this way. If you are of integrity, the
program will
continue and the money that so many others have received will
come your way.
NOTE: You may want to retain every name and address sent to
you, either on a
computer or hard copy and keep the notes people send you.
This VERIFIES that
you are truly providing a service. (Also, it might be a good
idea to wrap
the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each
post is downloaded and the directions carefully followed, six
members will
be reimbursed for their participation as a List Developer
with one dollar
each. Your name will move up the list geometrically so that
when your name
reaches the #1 position you will be receiving thousands of
dollars in
CASH!!! What an opportunity for only $6.00 ($1.00 for each of
the first six
people listed above) Send it now, add your own name to the
list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
Step 1) You do
not need to re-type this entire letter to do your own
posting. Simply put
your cursor at the beginning of this letter and drag your
cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at
the top of the
blank page. From the 'edit' menu select 'paste'. This will
paste a copy of
the letter into notepad so that you can add your name to the
list.
Step 3) Save your new notepad file as a .txt file. If you
want to do your
postings in different settings, you'll always have this file
to go back to.
Step 4) Use Netscape or Internet explorer and try searching
for various
newsgroups (on-line forums, message boards, chat sites,
discussions.) Step
5) Visit these message boards and post this article as a new
message by
highlighting the text of this letter and selecting paste from
the edit menu.
Fill in the Subject, this will be the header that everyone
sees as they
scroll through the list of postings in a particular group,
click the post
message button. You're done with your first one!
Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and
post away, after
you get the hang of it, it will take about 30 seconds for
each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200**
That's it! You will begin receiving money from around the
world within days!
You may eventually want to rent a P.O.Box due to the large
amount of mail
you will receive. If you wish to stay anonymous, you can
invent a name to
use, as long as the postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
part: Out of
200 postings, say I receive only 5 replies (a very low
example). So then I
made $5.00 with my name at #6 on the letter. Now, each of
the 5 persons who just sent me $1.00 make the MINIMUM 200
postings, each
with my name at #5 and only 5 persons respond to each of the
original 5,
that is another $25.00 for me, now those 25 each make 200
MINIMUM posts with
my name at #4 and only 5 replies each, I will bring in an
additional
$125.00! Now, those 125 persons turn around and post the
MINIMUM 200 with my
name at #3 and only receive 5 replies each, I will make an
additional
$626.00! OK, now here is the fun part, each of those 625
persons post a
MINIMUM 200 letters with my name at #2 and they each only
receive 5 replies,
that just made me $3,125.00!!! Those
3,125 persons will all deliver this message to 200 newsgroups
with my name
at #1 and if still 5 persons per 200 newsgroups react I will
receive
$15,625,00!With an original investment of only $6.00!
AMAZING! When your
name is no longer on the list, you just take the latest
posting in the
newsgroups, and send out another $6.00 to names on the list,
putting your
name at number 6 again. And start posting again. The thing to
remember is:
do you realize that thousands of people all over the world
are joining the
internet and reading these articles
everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
and see if it
really works?? I think so... People have said, "e;what if the
plan is played
out and no one sends you the money? So what! What are the
chances of that
happening when there are tons of new honest users and new
honest people who
are joining the internet and newsgroups everyday and are
willing to give it
a try?
Estimates are at 20,000 to 50,000 new users, every day, with
thousands of
those joining the actual internet.
Remember: play FAIRLY and HONESTLY and this will really work.

When I define a variable in BO it automatically turns it into a detail

i have made a user prompt in my report
so the user can input a value that does not exist in universe so i can use it as condition or a filter,
i have done this by using the followiing condition in the query
object = object
or
object = ToPrompt("Give number")
As you can see by the logic this condition will ALWAYS be true because object = object is always true. So this logic will not impact the rest of the query it will just allow to enter any value in the user prompt
in the report when i try to create a new variable
=ToNumber(UserResponse ("Query 1 with NEW_UNIV" , "Give number"))
it automatically turns it into a detail and i cant change it to measure or dimension.
is there a way to fix this
thanks in advance

some one answered in the following link
[When I define a variable in BO it automatically turns it into a detail;

HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

Was the restore done via iTunes?
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
If so then you may need to take it to Apple.

Turn aluminum into white

Similar Messages

Maybe you are looking for