Turn display off stopped working

2-3 days ago I noticed my displays not going to sleep anymore; I haven't changed anything in the Energy Saver settings - it still shows turn display off after 10 minutes but it does not.
Yesterday I installed the latest OS X Yosemite 10.10.3 upgrade but it's still the same.
I have 2 displays connected to my MacBook Pro 15" and I didn't check if it's happening for the MBP itself (will do this later).
Any ideas?

Well, the one thing I hadn't tried was the power off & the Home button - which worked. Never mind!

Similar Messages

IPhone 5 display has stopped working. How do I fix this?

My iPhone 5 display has stopped working. The Lock button has not been working for quite some time now, so I can't try a reset. When I plug the phone up to the computer, it makes the sound which indicates that it has been hooked up, bu nothing is displayed. It is just a black screen.

I'm sorry to hear about your phone, frodolad_ell. It sounds like you have a defective device. Is the phone still under the one year warranty? Does the device have physical or moisture damage? Please provide me with a few details.
ChaunceyM_VZW
Follow us on twitter @VZWSupport

Display shortcuts stop working

Display shortcuts stop working. Reboot starts everything up again.

Hi Larrypa,
I would be happy to assist if needed. Please let me know what is your model number and your current operating system? Here is a link that will help you find your model.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My windows say the quicktouch on screen display has stopped working and i have no volume??

HP Pavillion Entertainment PC dv6000
p/n KC302UA
operating system-Windows Vista
message says Quicktouch Screen display has stopped working. I have no volume and my volume bar wont work.
How do I fix this?

Please do a BIOS update and this may fix the issue,
If you wanna know how to do the same, please go to HP.com- Support & Drivers- Enter product number - Choose OS - Select BIOS - Download and install. Make sure that the Charger is connected to the Computer.

My TFT display suddenly stopped working HELP! G4 MDD DP1.25

Hi all...could use some pointers here. My formac 17" TFT display has suddenly stopped working on my MDD G4 DP1.25 - I use the standard graphics card. Turned the mac on today, and the display just wont turn on, though the silver light on the display flashes (as in standby) which means it's getting power. I also have a CRT display attached to the same card, and it's working as normal which I presume means that the graphics card is not dead. I tried booting from a different startup volume, same result. Any ideas please?? thanks!

no it doesn't support multiple inputs, it just has an on/off switch and is connected to the radeon 9000 pro graphics card (as shipped with the G4) via the ADC connector. Like I said, the VGA monitor that's hooked up to the same card works ok. And....weirder still, the Formac monitor has USB ports on the back, and although the monitor will no longer work (just the pulsing light on the front suggesting it's in stanbdy mode) the USB devices will still work when connected to the monitor - so this means either the card is half working or the monitor is half working!!! But I need to know which before I spend any $$$. Anyone got any ideas please? thanks!

Dell XPS 15 l502x mini-Display Port stopped working after update.

After the updates on the 11-10-2014 my mini-display port (which worked great previously and is part of the Intel Graphics) stopped working.
Am running Arch 64bit with Slim + E19
The symptoms are:
1. Detects monitor from the laptop and xrandr throws no errors
2. Enlightenment thinks the screen is connected and it appears in the screen setup as on.
3. The monitor no longer recognizes that there is a laptop plugged in and just stays off...
kernel.log
Oct 13 10:10:19 localhost kernel: [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder B
Oct 13 10:10:19 localhost kernel: [drm:cpt_serr_int_handler] *ERROR* PCH transcoder B FIFO underrun
Oct 13 14:09:35 localhost kernel: [drm] Wrong MCH_SSKPD value: 0x16040307
Oct 13 14:09:35 localhost kernel: [drm] This can cause pipe underruns and display issues.
Oct 13 14:09:35 localhost kernel: [drm] Please upgrade your BIOS to fix this. (Will look for an update...)
lspci | grep Intel | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Here are the packages that I think I may have to swap around...
[2014-10-11 19:16] [PACMAN] removed ati-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed svga-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] upgraded apache-ant (1.9.4-2 -> 1.9.4-3)
[2014-10-11 19:16] [PACMAN] upgraded libdrm (2.4.56-1 -> 2.4.58-1)
[2014-10-11 19:16] [PACMAN] installed mesa-dri (10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded wayland (1.5.0-1 -> 1.6.0-1)
[2014-10-11 19:16] [PACMAN] upgraded mesa (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded mesa-libgl (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded libva (1.3.1-2 -> 1.4.0-1)
[2014-10-11 19:20] [PACMAN] upgraded linux-lts (3.14.19-1 -> 3.14.20-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-ati (1:7.4.0-3 -> 1:7.5.0-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-intel (2.99.916-2 -> 2.99.916-3)
As far as I can see my options are to try and roll back via pacman -U in my /var/cache... or to figure out how to make my Nvidia HDMI output work using Synergy...
I suspect this is some type of driver regression (kernel/mesa/xorg) but am not sure as I have not seen much information about this issue online.
Unless someone has a better idea... when I get time to try to resolve the issue I will update this post.
Ok I missed this from dmesg:
[11671.333426] WARNING: CPU: 0 PID: 486 at drivers/gpu/drm/i915/intel_dp.c:137 intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]()
[11671.333428] invalid max DP link bw val 0, using 1.62Gbps
[11671.333430] Modules linked in: ctr ccm bnep ipt_REJECT xt_conntrack iptable_filter xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core fuse v4l2_common ecb videodev media btusb bluetooth 6lowpan_iphc coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp joydev mousedev snd_hda_codec_hdmi kvm_intel arc4 snd_hda_codec_realtek snd_hda_codec_generic kvm iwldvm snd_hda_intel snd_hda_controller crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd snd_hda_codec r8169 iwlwifi snd_hwdep dell_wmi snd_pcm sparse_keymap iTCO_wdt snd_timer snd mii iTCO_vendor_support dell_laptop microcode pcspkr dcdbas dell_smo8800 psmouse serio_raw
[11671.333467] thermal soundcore i2c_i801 shpchp evdev mac_hid mei_me mei lpc_ich wmi processor ac battery pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) udlfb syscopyarea sysfillrect sysimgblt fb_sys_fops tun nfs lockd sunrpc fscache vhba(O) bridge stp llc brcmsmac cordic brcmutil led_class bcma mac80211 cfg80211 rfkill bbswitch(O) ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common atkbd libps2 ahci libahci ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio i915 button intel_gtt i2c_algo_bit video drm_kms_helper drm i2c_core
[11671.333506] CPU: 0 PID: 486 Comm: Xorg.bin Tainted: G W O 3.16.4-1-ARCH #1
[11671.333509] Hardware name: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A04 03/25/2011
[11671.333511] 0000000000000000 00000000c0982604 ffff8800b2b4fa80 ffffffff8152ba1c
[11671.333515] ffff8800b2b4fac8 ffff8800b2b4fab8 ffffffff8106e45d ffff880037c92000
[11671.333518] 0000000000000000 0000000000000004 ffff88014e2d8c00 ffff8801b5a2f800
[11671.333521] Call Trace:
[11671.333528] [<ffffffff8152ba1c>] dump_stack+0x4d/0x6f
[11671.333534] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
[11671.333537] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
[11671.333553] [<ffffffffa00f543e>] intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]
[11671.333566] [<ffffffffa00f5539>] intel_dp_compute_config+0x99/0x660 [i915]
[11671.333579] [<ffffffffa00da214>] __intel_set_mode+0xb14/0x1670 [i915]
[11671.333608] [<ffffffffa00dd4e6>] intel_set_mode+0x16/0x30 [i915]
[11671.333638] [<ffffffffa00de623>] intel_crtc_set_config+0xa83/0xdd0 [i915]
[11671.333666] [<ffffffffa0025fa1>] drm_mode_set_config_internal+0x61/0xe0 [drm]
[11671.333690] [<ffffffffa002984b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[11671.333712] [<ffffffffa0019b9f>] drm_ioctl+0x1df/0x680 [drm]
[11671.333728] [<ffffffff811d4db0>] do_vfs_ioctl+0x2d0/0x4b0
[11671.333737] [<ffffffff811df4ee>] ? __fget+0x6e/0xb0
[11671.333745] [<ffffffff811d5011>] SyS_ioctl+0x81/0xa0
[11671.333753] [<ffffffff815317a9>] system_call_fastpath+0x16/0x1b
[11671.333758] ---[ end trace 64be8044e26ca3c5 ]---
Last edited by scmurcott (2014-10-13 19:12:07)

So I downgraded those packages and the kernel with no luck.
I tried to get the HDMI working via Synergy... and failed
I then tested the Display Port on Windows and it did not work there either - exhibiting the same symptoms as Linux - the OS sees the monitor but no data was transferred.
So I ended up using one of my Display Link monitors at work... the USB monitors were ok, just an irritation with a flickering mouse.
I hope it is the miniDP>HDMI adapter and not the port... very frustrated by this problem.
I hope to test another adapter soon.
I think as nobody else is experiencing this issue that it may well be hardware/firmware related.
Hope there is a happy end to this post but not feeling so positive right now.

My 13'' macbook pro retina's display just stopped working for some reasons i don't know, what can be the cause?

Hello
i'm really worried about my macbook pro, it's a 13'' retina 2012 model. After watching a late night movie last night i just closed the lid and went straight to bed as usual. To my surprise when i flipped open the lid this morning it only made the apple sound when turned on but didn't display anything. I tried switching it on and off several times but nothing changed. So i connected it to an external display and it worked fine. The funny thing is i never dropped it or spilled any liquid on it. Now i'm wondering what could be the cause and i'm hopping someone might be abble to explain this....Could it be the lcd screen, the video card or graphic processor or could it be the logic board?? Help.

reseting the System Management Controller won't wipe my SSD drive will it?
No, but if you don't already have a backup, you must back up immediately, before you reset the SMC or do anything else.

My display has stopped working

Hello
I bought my Thunderbolt Display 2 weeks ago, and now it doesn't work. The display is connected to my MacBook Pro (OS X 10.8.2). Yesterday I unplugged it and turned off my mac. Today I plugged it in and... I see only the black screen. However, the light on the MacSafe connector is green. I tried to fix the problem, as suggested in manual, by unplugging the display's power cord from the grounded power outlet + reseting the PRAM. Nothing helped. Should I contact my Apple store or is there any other way to fix it?
Thanks

Contact your local Apple Store - the TB Display should simply work. Your's isn't. There's a problem.
Clinton

Thunderbolt display has stopped working with my mac mini

I purchased a brand new thunderbolt display and mac mini a couple of months ago, and now the thunderbolt display no longer comes on when I start the mac (I am only able to type this here because I pulled out my old monitor and plugged it in to the mac mini via hdmi port, which seems to work just fine).
I have so far shut down and re start my mac a couple of times. I have unplugged everything and started them back up a couple of times, but nothing seems to work. How can I get this fixed? I have to admit that I feel like a shmuck for paying this much money for a monitor and then have it stop working.

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Is the printer attached to the computer or is it a network printer?

Cinema display USB stops working after upgrading to mountain lion

I am using a newly bought 27' Cinema display + mid 2011 MBA. an Apple USB keyboard is attached to the display USB port, and a logitech mouse is attached to the USB port on the keyboard.
After upgrading to mountain lion, when I unplug the thunderbolt from MBA, and then plug it back, the USB keyboard and mouse stops working. Moreover, I cannot open anything in System preference, and cannot properly shutdown the machine!
Please help on this issue.

Launch Terminal, type or copy/paste the following:
killall Dock
Hit enter.

How to turn display off msi 110w

Hello,
I use both android and ios devices and when clicking the power button, the display turns off to allow for background tasks to continue running.
Can this be done on the 110w? I'd like the screen off when listening to music or running updates.
Currently when i press the power button, nothing happens, but when i hold it for a few seconds, the tablet sleeps.
Thanks in advance.

Quote from: pox67 on 01-June-12, 11:09:31
I haven't found a way to do this.
You could set the screen time out to something pretty low so that it blanks if not used after a short time.
I considered that, but found it became quite annoying when I needed the screen to stay on.
I had a program which turned the lcd display off when run, but i'd like the power button to perform that action, not an app.

TS4079 Siri is not working since 7.0 upgrade - if I turn Siri off it works with voice command. Microphone functions with other apps just fine. I have gone through the trouble shooting page and still nothing. I read others are having the same issue.

I have restarted the phone and reset it - Siri still not working. It does not pick up any voice - just lists some options.

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Re: display driver stopped working and has responded

I have hp envy touch smart 15-J070US i have smae erorr " display driver stopped responding and has recovered : Display driver AMD drive stopped responding and sucessfuly recovers " and alway the scren goes to be black or stopped before this messege, I tried everything " uninstall driver and reinstall it , recovery windwos , update driver " nothing work , what I should do , I'm really upset from this message , recently I'm trying to not use my envy laptop to not see this message , plz if you have any solve , thanks and waiting

Hi @Ayman6784
Welcome to the HP Community! I see that you are getting a “display driver has stopped” error message and I will be happy to help you with this. Are you using the AMD driver from the HP website or did you download it from AMD's website? Are you using Windows 8 or 8.1?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

My external display suddenly stopped working...help?!?

I have a 2009 MBP that I have been using in clamshell mode for the past 1.5 yrs. I've had it hooked up to a LG Flatron M2362D 23" HD monitor for about 6 months or so. I have never even had a hiccup until now. However, about 30 mins ago, my display decided to stop working. I have it hooked up with the mini-DVI. I tried switching to my 19" Dell monitor (which I know works) to check and see if it was just my display, however the problem persists. Is anyone else having this problem? Does anyone know how to fix it?

I wish I could help, but I'm here because I just began having the same problem. Everything worked great until a few days ago. The external monitor works great with my old Dell laptop, just not with my Macbook Pro. This is really frustrating.

Power Saving turn monitor off not working in XP Pro

Hi I just got a new 24" imac (the previous generation, white model)
In windows xp the screen saver works, but the power saving feature to save the monitor and turn it off does not work. Many other people are having this same problem but apple has not fixed it yet.
http://forums.macrumors.com/showthread.php?p=4295426
please help

I think I resolved this! I had the same issues you have been having for a few months. I am actually running Vista. Here is what I did...
1. While booted to Windows I uninstalled boot camp
2. Re-installed boot camp from Leopard DVD
3. Installed boot camp update 2.1 (downloaded from Apple support, i know this is for XP only, but I updated anyway.)
4. Downloaded the realtek drivers (high definition audio codecs) from http://www.realtek.com.tw/downloads/
5. DO NOT use the Realtek installer to install the drivers...instead extract the contents to a folder.
6. Go to the device manager, locate the High Definition Audio device and updated the drivers from here (point to the folder where you extracted the drivers).
I now have sound out of the rear jack!! Hope this help someone
Regards,
Blaine

Turn display off stopped working

Similar Messages

Maybe you are looking for