Turn of Press MENU to turn on FIOS i.e screensaver

I have tried turning the sleeper time to none under the media server.
I have an arris VMS1100 box. I want this stupid icon to go away. My TV autoturns off on its own, so I would much rather not bother have to click so many buttons.
Can someone help i have gone through all of the settings under menu and cannot figure out which one it is or if they removed the ability altogether.
Thanks,

There have been some auto reboots that cause the box to go back to screensaver.
But outside of that, my box stays on every night.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

"Press Menu to Watch Fios TV" logo-turned off but came back!

I hated that logo that would appear when I would turn my TV on that says "Press menu to watch Fios TV. Otherwise turn your TV off." I looked through all the settings and options and finally found out how to get rid of it. I don't remember where I found it but it had options for that logo to come on after certain time intervals or to never come on. So I changed it to never and it stopped coming on for awhile.
Unfortunately, now it's back! I found that option again, assuming it had somehow been changed but it was still set to never come on. So why is it coming on again? I wouldn't mind so much if it weren't for the fact that I tape some things on VHS. Ok, you can stop laughing now about the fact that I use VHS. I have my reasons though it's not worth taking the time to explain. Anyway, the problem is that if that logo is on while the VHS is taping, all it tapes is the logo, not the show I had programmed to tape.
Does anyone have any idea why this logo came back, even though the setting is still set to not have it appear and what I can do to fix this problem?
Thank you!
-Tracy
Solved!
Go to Solution.

Depends on what model box you have.
But generally, look for screen saver.
Also, no real advantage to turn the box off.
Doesn't save any energy.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

The "...press menu" message just statrted up again

The "press menu" prompt just started up on my Quantum FIOS system I can't find the screen saver option to turn it off. I have the media server system no STB; where is it hiding now?

ChasH wrote:
I don't have those exact menu options but this looks similar - Menu>Settings>System>Media Server Settings>Sleep Timer and I've set it to None. That may do it. Thanks for the tip
Yes that will do it. I just checked my settings and looks like they changed it from auto off to sleep timer. I was wondering what the deal was when my box got another update the day after the initial update.

Apple TV resets crashes when you press menu while watching show.

This is a post for anyone else having the same problem.
Situation
Turned on 'Unwatched' filter for my TV Shows.
Watched a TV Show.
Pressed Menu to exit the TV show during the last 5% of the show.
Expected Behaviour
I expected that I would return to the listing of episodes for that season.
Actual Behaviour
The Apple TV restarts/resets itself.
Reason
It seems that the AppleTV tries to exit to the show listing and mark the show as watched. However, it can't show you a show that has been watched, so instead it pulls the rug out from under its own feet and falls over...
That is ridiculously bad beta testing on the part of the AppleTV development team.
Fix
Don't use the unwatched filter until Apple fixes this. OR
FastForward in order to exit the show...This then exits to the show list, but marks the show as unwatched.
P.S. Don't be clever and try and mark a show as 'watched' while you have the unwatched filter on. You get the same crash.

This is a post for anyone else having the same problem.
Situation
Turned on 'Unwatched' filter for my TV Shows.
Watched a TV Show.
Pressed Menu to exit the TV show during the last 5% of the show.
Expected Behaviour
I expected that I would return to the listing of episodes for that season.
Actual Behaviour
The Apple TV restarts/resets itself.
Reason
It seems that the AppleTV tries to exit to the show listing and mark the show as watched. However, it can't show you a show that has been watched, so instead it pulls the rug out from under its own feet and falls over...
That is ridiculously bad beta testing on the part of the AppleTV development team.
Fix
Don't use the unwatched filter until Apple fixes this. OR
FastForward in order to exit the show...This then exits to the show list, but marks the show as unwatched.
P.S. Don't be clever and try and mark a show as 'watched' while you have the unwatched filter on. You get the same crash.

Command is not showing in to the list on pressing menu button on the device

Hi Everyone,
I have developed a midlet in which I have designed buttons or links using Custom Items. Command associated with the custom item is not showing in to the list on pressing menu button on the device 8300 Curve.
For example - My login screen have SUBMIT and RESET custom items. I have designed them to be appear like links [no matter how I design them]. I have also added a command and listener to it like as below:
CMD_SUBMIT = new Command(text, Command.ITEM, 1);
setDefaultCommand(CMD_SUBMIT);
setItemCommandListener(this);
On running the midlet, my login screen appears. But when I travarse to the SUBMIT item, and press the menu button, my command doesnt appear in the list of commands. It shows only the Close command. I am not getting why this is happening.
Please do me a favour and help me to sort out this. On other phones like 8520 curve the command is appearing in to the list when I press the menu button.
Regards

Is there any way to sort out this issue? I am not getting the cause
behind this, and I am observing this only on 8300 Curve. On most of
there phones [though not tested on every one] it is working as expected.
Please guide me to proceed further. I am desperately waiting for the
response. Regards.

Is there a tutorial on how to make a long press menu appear on a table item with storyboard?

Hi there!
I'm very new to app development and i've been playing around with designing a few. I wanted to know, how can you create a long press menu appear when pressing and holding on a table item. Id like it to pull up a menu with 3 options, each leading to its own view depending on what one is selected.
Is there a decent tutorial out there for a beginner? I'm using the newest xCode with storyboard and all the tutorials i found are for older xCode versions.

Greg,
This topic is covered elegantly in an older book by Al Ward. The directions are too long to post here. The book is still available - at Amazon for $0.46 + postage!!
http://www.amazon.com/s/ref=nb_ss_b?url=search-alias%3Dstripbooks&field-keywords=photoshop +elements+2+special+effects&x=11&y=12
He wrote this for PEv.2, yet it requires only the basic tools which remain in the more recent versions of the program.
Ken

My ipod classic has frozen. Have tried pressing menu/centre button and resetting, but still frozen. Can anyone help.

My Ipod classic has frozen. Have tried pressing menu/centre button and resetting, but still won't work. Can anyone help please.

Helen y s wrote:
We have tried the usual restart a few times but with no success.
You mean that you have put the iPod's Hold switch on, then off, and then press-and-held both the Menu and the Select (centre) buttons together for at least ten seconds.
Have you made sure the iPod is charged?
If you have tried the Restat procedure (above) three times, have you then tried connecting the iPod to your iTunes Library?

I lose vision and when I press Menu it reverts to start. How do I fix?

In middle of a film or TV programme I lose vision though send continues. Wen I then press Menu, the programme reverts to beginning. How do I fix this?

Hello-
Check to see which printer you have set as default.
Some of our printer install two icons for each printer. (Printer & Fax)
I hope this helps.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer. 2) I pressed Ctrl-F to search for some bookmark(s) (e.g. newspaper domain) and found some. NOW The qustion is "Which folder this/these bookmark(s) are actually located in"?

Salut!
The scenario is "Find bookmark existed before and recall which bookmarkfolder it is in"
Please note the "folder" is for "bookmarks", NOT a file folder of HDD-filesystem
1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer.
2) I pressed Ctrl-F to search for some bookmark(s) (e.g. newspaper domain) and found some.
NOW The qustion is "Which folder this/these bookmark(s) are actually located in"?

Hey, guys. Thanks for responding. I really didn't know I was so clueless about this stuff.
I really thought "urxvt" could be used as an alias or, what we called in Debian, an alternative, to the rxvt-unicode-256color command. I guess not? I'm still trying to set up "vi" to be Vim as well, and I'll read more of the Wiki to figure that stuff out with Arch.
So in the tty interface I can start zsh again just fine. That's old news. I removed the TERM setting and placed the resource in my .Xresources that derhamster said. Thanks.
I also replaced the line in my Openbox rc.xml and menu.xml for terminal opening commands (can I use $TERM for those?)
Now when I start Xorg (with Openbox running) I tried both urxvt-unicode-256color and urxvt but none of them work with Openbox. No terminal emulator pops up and no errors show that I can see.
Last edited by mrrhq (2012-11-13 18:34:29)

I can't find some of the addons I installed as they are not on the long press menu for Firefox for Android

This is about addons. I have read the support article on finding and mana addons and it didn't solve my problem. I can't find some of the addons I installed although they appear on the list of addons installed on the tools addons page. Some are on the long press menu but those I can't find include bluhell, tap tap wrap, tap translate and add block edge.

They appear on the Add-ons list as being enabled, but there doesn't seem to be any user interface to actually use them?
I haven't experimented with those particular extensions. If you don't see what the screen shots on the add-ons site show, usually there is a support link for the extension, or you may find usage tips in the reviews from other users who ran into the same problem.

I have to press menu many times to get to the main screen? This just started happening.

I have to press menu many times to get to the main screen? This just started happening.

If you believe your Device to be faulty...
Take a Visit to an Apple Store or AASP (Authorized Apple Service Provider) and have it evaluated...
Be sure to make an appointment first...

HT2822 apple tv just says date and time will not connect press menu button on remote,dose nothing then goes to screen saver shots of animails

First time connecting apple tv just says date and time will not connect press menu button on remote,dose nothing then goes to screen saver shots of animails

Read this: http://appletv2.com/stuck-on-setting-date-and-time-fix/

HT1363 after pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do

The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.

Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel

How to stop the "Press Menu to wach Fios TV, otherwise turn off your TV"

Does anyone know how to stop the STB from going into this mode? It messes up my other home entertainment equipment.
Thanks!

New option in IMG 1.7:
Menu ==> Settings ==> Set-Top Box ==> Screen Saver ==> No Screen Saver in Standby
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

Turn Off Vibration When Pressing Menu Key

A user suggested unchecking haptic feedback to turn off the vibration when you touch certain keys. I did not work or maybe we are talking about two different vibration functions of the Droid 2.
When you press any of the four function keys at the bottom of the device (e.g. Menu, Home, Back, Search key) or swipe right to unlock, the device does a small vibration. Is it possible to turn that feature off?

unimatrix001 wrote:
A user suggested unchecking haptic feedback to turn off the vibration when you touch certain keys. I did not work or maybe we are talking about two different vibration functions of the Droid 2.
When you press any of the four function keys at the bottom of the device (e.g. Menu, Home, Back, Search key) or swipe right to unlock, the device does a small vibration. Is it possible to turn that feature off?
Are you sure you are looking in the right area? I believe the one you are looking for(May be as above since it has "blur" integrated) should be under
Menu button --> Sound Settings --> Haptic Feedback (this one may be different due to Ninja Blur)
there should also be one for the android keyboard
Menu button --> Language & Keyboard --> Android Keyboard --> Vibrate on keypress.

Turn of Press MENU to turn on FIOS i.e screensaver

Similar Messages

Maybe you are looking for