Turn Off AOL radio Automatically

Hi all:
Is there a way for me to turn off AOL radio automatically on my iPhone after a certain amount of time? I tried using the clock app, but to no avail.
Thanks
JJM

There's nothing in the iPhone iOS that can do that. Your only option is if there's a setting in the app itself.

Similar Messages

  • Turn off the radio automatically on a schedule?

    I was wondering if anyone has had success in automatically turning off the AP radio automatically that is based on time of day? We are thinking of turning it off with a script. Can this be done through an SNMP statement?
    Any feedback would be greatly appreciated.

    Hi
    You can certainly achieve this using the Wireless Lan Solutions Engine, and that uses SNMP to configure the APs, so it should be possible to do it through using an SNMP statement.
    HTH
    Kev

  • My phone don't charge without turning off the radio signal on the phone.

    My phone do not hold a charge unless I turn off the radio on the phone or remove the sim card. Prior to this it while charging a black plug used to replace the lightening bolt on the battery symbol. However, while the radio is off the plug do not appear. Please advise.

    Hello seanjontt
    Welcome to BlackBerry Support Forums
    Are you sure that the battery is good enough or have you tried to use another Good BlackBerry battery , if not then try to arrange a fully charged battery and test it on your device , it will reveal if the problem is within your device or the Battery itself.
    Try it and let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • How can I turn off apps that automatically sync?

    Whenever I try to move music from itunes to my ipad mini it says it is over memory.  I can see the music on the ipad but it is grey and will not play.  I have tried to delete apps (which are taking up most of my memory) I do not want but it keeps putting them back on.  I have turned off the 'sync automatically' button on the preferences and devices in itunes.  I have unclicked the 'will install' on the apps section on itunes.  I have synced repeatidly and whenever I click the sync button the things I have just clicked on suddenly become 'will install' again. 
    I only want to move some music across from itunes but it won't even let me do that. 
    PLEASE HELP I AM GOING CRAZY!!

    Yes i did that, but when i went back to my home screen all the applications that i've choose to not using data just automatically activate themselves.... ><

  • Cannot turn off streaming radio on mac book pro

    cannot turn off streaming radio on mac book pro

    You've got it open with some application, either iTunes or in a browser window. Exit out of that application.

  • Turn off the radio in access connection

    I am going to deploy AccessConnection 5.33 on XP to a number of clients and I want to turn off the radio with a vbscript when users log off. I have heard that this can be done in the registry but I haven't found the correct key.
    (I don't want to use Fn+F5 to do this)
    Does anyone know what reg.key to use?

    I don't know about the registry or any vbscript but there is one option in the access connection setting that say turn off all wireless connection when the user log off....
    it's under the advanced screen, global setup (or whatever is called; i'm using chinese) and the third checkbox under the network tab...give that a try...might need to do that as admin to apply to all user?
    maybe that's what are you looking for or a good place to start?

  • How can I stop my iPhone4 from turning off and on automatically?

    Hi,
       I would highly appreciate it if someone could take a moment and help me regarding my iPhone4 issues. I had my iPhone resting on my desk unplugged for quite some time, and when I decided to make a call, the phone was really hot I could not hold it against my face, the phone turned off and the call was lost. I look at the screen and it was turning off and on automatically, it's been doing so for 3hrs and I don't know what to do. I've already tried to turn it off and it won't even turn off. I'm contemplating whether to go to an AT&T store for advice or call the apple store. It's Friday 08/23/2013 and this hasn't happened to me before, will someone please help? Thanks in advance.

    See Here  >  http://support.apple.com/kb/HT1808

  • Turn off Caps Lock automatically

    How can I read Caps Lock situation automatically ?
    And How do I turn off Caps Lock automatically ?
    I have attached program.
    Thanks
    Attachments:
    Virtual Keyboard 2009.vi ‏21 KB

    see here
    Did you do a forum search first?
    CLA, LabVIEW Versions 2010-2013

  • Turn off Cell Radio (and wifi) and Leave AGPS On?

    Hello,
    I would like to turn off all radios except GPS to save battery life on extended excursions without power. I know how to turn off wifi, and with Airplane mode I can turn off all other radios, but even if, in airplane mode, I have Location Services on, it does not appear that the A-GPS radio is active.
    Is there a way to do this? If I pull the SIM card, does this disable the cellular radios? Or just inactivate service but still allow the power drain?
    Thanks!
    Michael

    Seems there should be a way to turn the cell radios off.
    There is, its called Airplane mode, but this also turns off the GPS chip as well.

  • Can I turn off GSM radio of my Verizon iPhone 5?

    So My Verizon iPhone 5 runs on the CDMA network, but it also has GSM unlocked capabilities.
    I know that it comes with a Verizon SIM for roaming internationally, which I'm not interested.
    I have an international sim from my home country, which I use when I go home. It works perfectly. When I'm back to the US, I take it off and I'm back to CDMA on Verizon.
    My question is - is there a way to eliminate this SIM switching steps? I mean, when I'm in the US, I'd like to turn OFF the GSM radio so I use Verizon's CDMA. But when I travel, I'd like to turn it ON to activate the SIM card and use the GSM. Right now, if I have the SIM card inside the iPhone 5 when I'm in the US it will overide my CDMA signal and will pick the GSM signal (in roaming from my home country). I have to take it off everytime I'm back in the US, which it's not nice.
    Any chance this is possible? Any ideas?
    Thanks.

    To expand on what Tim said, the iPhone 5, to work on Verizon's network requires that the Verizon 4G LTE SIM be installed in the phone. The SIM that came in your Verizon iPhone 5 is not a GSM SIM for roaming internationally.
    The Verizon iPhone 4S comes with a Vodafone GSM SIM for international roaming. The SIM slot is not required on the 4S for Verizon's 3G CDMA network.

  • WRT150N - Is is possible to turn off the radio transmission?

    Hi all,
    I have a WRT150N. I currently use it as a router, accessing the Internet through a cable, not the wireless radio signal.
    I would like to turn the wireless radio signal off because the radio interferes slightly with my Plantronics CT12 headset phone.
    Is there a way to completely turn off the broadcast of the radio signal?
    I did set the Wireless Network Mode to "disabled", but I have read elsewhere on this forum that this does NOT disable the broadcast of the radio signal.
    I would be grateful for any help.
    Thanks much,
    Warren

    You need to have to disable the wireless broadcast ... for the router .... you can change the wireless channel on it
    Radio Band - 40Mhz
    Wide Channel - 6
    Standard Channel - 8 ...
    Click save settings ...
    Again check that the issue occurs or not ....

  • Is there a way to schedule the screensaver to turn off or on automatically?

    Greetings, folks,
    I have rotating firewire hardrive backups scheduled via Dantz Retrospect on my iMac G4 for all of my computers in the house. Obviously these backups utilize quite a bit of CPU power, around 90-96% on average. A problem I have is that the backup will suspend if another high CPU process starts like, the screensaver for instance. Dantz say that this is typical and to disable the screensaver when performing backups to avoid this. But if I'm not home when these backups take place then I have a problem; I also don't want to not have the screensaver turned off all of the time. Here's my question; Is it possible to schedule the automatic turning on and off of the screensaver via automator or applescript? Cheers in advance for any help.
    Cheers,
    D
    PB 17 1.5 ghz 2gb Ram   Mac OS X (10.4.3)  

    A couple of things. The ScreenSaver settings are stored in ~/Library/Preferences/ByHost. You'll have to determine which one of those is the one containing the idleTime parameter. On my machine, using the Terminal app command:
    defaults read /Users/baltwo/Library/Preferences/ByHost/com.apple.screensaver.003065aba550 yields:
    idleTime = 900;
    lastPictureDirectoryChosen = "/Users/baltwo/Library/Screen Savers";
    moduleName = Cosmos;
    modulePath = "/System/Library/Screen Savers/Cosmos.slideSaver";
    Change it with this command:
    defaults write /Users/baltwo/Library/Preferences/ByHost/com.apple.screensaver.003065aba550 idleTime 1800, for example, changing it from 15 minutes to 30 minutes.
    Setting it up for your situation is left as an exercise since I don't know how long your backups take or when you schedule them. The Applescript command would be something like:
    do shell script "defaults write /Users/baltwo/Library/Preferences/ByHost/com.apple.screensaver.003065aba550 idleTime 1800"
    G4 450 MP Gigabit   Mac OS X (10.4.3)  
    G4 450 MP Gigabit   Mac OS X (10.4.3)  

  • My iphone4 recently stopped working in my car and no longer asks for audio sources.  It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

    My iPhone recently stopped asking for audio source in car and no longer works through the speakers.  It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate.  What happened?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • Turning off Internet Connect automatic prompt

    I have a Verizon Broadband Express wireless card for internet connections. I constantly have to turn off the prompt to start Internet Connect function. To try and stop this, I have gone to preferences and turned off the "Start internet connection when needed" function. It is annoying and distracting while giving a presentation.
    PLEASE TELL ME how to get rid of this painful interruption.

    FYI - this is the Internet and Networking discussions area for the iPhone only.

  • Droid Razr - how do it turn off internet radio?

    Not sure how to turn off an app.  Turned on my music and when I go into Manage apps, if I highlight STOP it cautions me that I could cause a problem.  How do I know app is turned off or how do I turn it off (New phone, new user, need help)

    Well usually when your in an app Say Like Slacker for Instance and your Listening to it But you want to Stop it. Well you would hit the Pause button then Tap your Menu then you will see an option to Exit once you do it will stop. But one thing you can remember that Android is Set up to were you can go from one app to another and the System will adjust to it.
    But it sounds Like you could use Some Tips to Help you a long Here is the Way to That:  Just have a Look some maybe Lengthy but they should give some perspective on them And at the Last Page is Links to The Manuals for the Razr's..
    Just click Left click on the Blue below.. b33
    RAZR / RAZR MAXX Helpful Tips..

Maybe you are looking for

  • XSLT Mapping changes Required

    Hello Experts, I got one change requirment, where the name filed in the idoc contains special character (like semi colon) in between the name, I want to put double quotation for that special character at XSLT mapping. Eg: Input Name:   Ravi ; Kumar O

  • Logic X randomly adding tracks then freezing?

    I am on ver 1.0.0.2 now. When I start a new project the program starts adding tracks on its own, when I attempt to cancel I find 6 more tracks, I cannot cancel the proceedure, after it creates about 16 tracks it freezes and I have to force quit. I ho

  • HT204406 erase duplicates in itunes 11.0.2

    How do I clear erase duplicates or consolidate them with this version if itunes.  It is really frustrating that it is not an easy way to do it.

  • Do I/Can I reformat ipod from windows to mac?

    My 30gb ipod is formatted for windows. I have successfully transferred all of my itunes (thank you for all of your help!!!). Now do I need to reformat my ipod for mac? Is that even possible? If so, how do I do that? Thank you in advance!!!! Jen

  • MaxL capabilities with Hyperion

    Hello, we are trying to manipulate hierarchies in a Hyperion Planning outline. As an example requirement: Take those costcenters where last year's revenue was higher than the last year average under a new parent in a secondary heirarhcy, without chan