Turn off center selected object in view

If I am zoomed in 500% and select an object, it centers it in my view, and sometimes it will select the object and move it, just by clicking on it. Is there an option to turn this off?! It's VERY frustrating when i'm trying to move things to s specific place. Here is a video.

I know this behavior but as this only occurs on high zoom levels it's not a problem form me.
The only way to avoid this I know about is to select objects in the hierarchy tree not in Design view.

Similar Messages

  • EAX turns off center speaker on CMSS2 m

    any eax setting be it environment or advanced eq turns off center speaker and I really want advance eq and my center speaker on.
    I really appreciate all your help Jeremy..... but I guess this is an easy issue to test just tell me if your cmss2 WITH EAX on gives you center speaker sound.Message Edited by kryptonian on 02-0-2005 08:44 PM

    When you turn on your cmss2 not cmss AND you have eax ON (select an advanced eq to make sure your eax is on)do you get sound from your center speaker?
    ..........best way to make sure that sound is coming form center speaker is unplugging front left and front right speaker
    cmss2 + eax = center speaker off..................is it supposed to be off?
    cmss + eax= center speaker on
    audigy 2 platinum ex
    what happens with you?
    Thanks alot

  • How to get the menu bar back after turned off all toolbars from the "View" menu

    Do this: turn OFF all toolbar view from the view menu, with the Menu toolbar the last one.
    Problem: cannot find any UI to turn it back, stuck with a bare window, except the tab list.
    == This happened ==
    Every time Firefox opened
    == turn OFF all toolbar view from the view menu, with the Menu toolbar the last one.

    Press the Alt key, this temporarily brings up the menu bar. You an then use the View menu to re-select the menu bar.

  • How can I turn off word wrap in the View Source output?

    I'm trying to extract HTML from Word and one way to do that is to save the Word file as a .htm file and then View Source in a browser and copy that. But the words are wrapped in the View Source file. I want each paragraph to be all on one line. Is there a setting for the View Source feature that will turn off word wrap?
    Once I have that done and copied into a plain text editor, I will use Search>Replace to get rid of all the stuff Word puts there and just end up with the simple paragraph tags at the end of each paragraph, all on one line.

    You can disable wrapping and syntax highlighting in the View menu in the Edit > View Source window.

  • All layers turning off when selecting layers.

    I'm sure this is discussed elsewhere, but I can't find anything…
    I keep having this thing happen where when I go to turn on a layer (layers pallet, the little eyeball icon), all the other layers turn off. Then I have to go back and turn on just the ones I meant to be on. Causes me problems in large multi layer documents… risks embarrassing errors.
    I'm sure this is a feature, but I can't figure out what causes it to happen, and how to stop it from happening. Or for that matter going back to the previous state. Feels to me like a "mis-click" or stutter from using a Wacom.
    Any ideas?

    Like R_Kelly said, it is the normal behavior if you hold the option key.
    If the option key is not stuck, it reminds me of an old bug, that has been cured by an update.
    Check that you are running Ps 12.0.4 or 12.1, or run the updater: http://adobe.ly/PS-Up-To-Date
    If you are running the lastest version, you might want to re-create your preferences, per : http://adobe.ly/PS_Prefs

  • Turn off "Optimizing for fast web viewing"?

    I downloaded a .doc file from the internet with Firefox and saved it to hard drive. Then I had it converted to a .pdf format online via zamzar.com. Then I opened it with Adobe Reader XI and saved it to hard drive, but it changes size in that process. There's a popup near lower right of screen saying "Optimizing for Fast Web Viewing" (see graphic below) which I never saw before. This is very disconcerting and upsets all notions of file identity based on size. I don't want it to change the size automatically. How do I turn that off?
    (Windows XP Home SP3, Adobe Reader XI)

    Back up and restore using iTunes.

  • How do you turn off filmstrip in Full Screen View?

    I just upgraded to version 3.4.3.  In Full Screen Mode, a film strip now appears on the screen (see image below).  I want to reclaim that real estate.  The filmstrip was not present in the prior version.  Did I somehow turn it on accidently? If so, how do I turn it off? Or, is this a new, but unwanted part of 3.4.3?
    So far I am unimpressed with this new upgrade.  It is not user friendly.  As many have posted before, losing the colored folders, etc is not user friendly at all.

    The filmstrip can be locked or unlocked, depending on the setting of the slider at the right hand side of the filmstrip: If you unlock it, it will only appear, if you move the mouse to the lower border of the screen.
    Regards and "Happy New Year"
    Léonie

  • I received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen.  turned off tried to turn on no noise no screen load. thx

    i received the following message while i was on my macbook air "you do not have enough space in your start up disk - you must delete some files"-restarted; only got startup noise then blank screen. i waited for a few minutes to see if it would load - nothing just the lit up screen but nothing loaded - held power button it asked did i really want to turn off - i selected shutdown -turned off and left it off for awhile tried to turn on no noise no screen load. the same lit up screen but nothing loading.  please help thx in advance if anyone can offer some suggestions

    You can get there from here (booting normally); it just may take you a few steps to do it.
    If the disk is almost full and the system won't boot then sometimes it will boot in Safe Mode.
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Empty the trash after it boots.
    Then for hints on how to free disk/SSD storage see https://discussions.apple.com/thread/5872318?tstart=0
    If the Safe Mode boot does not do the trick then you can install OS X on an external hard disk, boot from that, and then delete files.  You can also reach the disk via Target Mode.  A third option is to take it to an Apple store where they can do a network boot and help you remove some files.

  • Turn off edge/anchor highlighting

    I must have pressed some keyboard shortcut and turned on this edge/anchor highlighting. Now, when I put my cursor over any line, it highlights it in aqua and says "edge" and when I put my cursor over any anchor it highlights it and says "anchor." It's extremely annoying and I want to turn it off. But I don't know what it is called to even search for how to do this. Can someone please tell me what this feature is called and where it is controlled in Illustrator?
    I'm using CS3 on Windows.

    I actually is the default setting for Smart Guides you can turn off smart guide in the View Menu and go to the preferences and tell it what you want displayed as well and keep them on.
    Command U is smart guides on and off.
    The settings in the prefernces

  • New Laptop Turning Off - Overheating

    Hello, Two weeks ago, I purchased a new HP Notebook, and today it has been randomly turning off. According to Event Viewer on the laptop, it has been over-heating. However, how do I directly contact Hp for a return or repair, as it is still within warranty. I ask this since I cannot find any direct contact information on the Contact Support page. Thank you for your help. 

    ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details)
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Thank you for visiting the HP Support Forum.

  • VBScript to turn off Backup schedule

    We have a third party application that backs up our user data, but the last guy who created our images forgot to turn off the scheduled backup. We have hundreds of machines that need to have the "turn off schedule" selected. I can't find a vbscript
    that will do that. I need to be able to run the script via psexec on all of the machines. I need some help on where the "turn off schedule" writes to the registry. Anyone know?
    Thanks
      

    Hi,
    I'm not very clear on exactly what you're asking, but you can use this tool if you're trying to figure out what registry changes you need to make:
    http://sourceforge.net/projects/regshot/
    Group Policy can then be used to enforce registry changes on the clients.
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • Turn off "favor the selected object"

    I recently switched to CS5 and discoverd the new "favor the selected object" feature. And i don't like it!
    I can see the advantage of not accidentally selecting an overlapping object, but after a few hours of indesigning it drives me mad! It makes me accidentally deselecting the bottom object when trying to select multiple objects.
    I found that CMD+selecting makes the selection tool work like in previous versions. Is there a way to turn this feature off, and perhaps make CMD+selecting act in the new CS5 way?

    I can't tell you how often this feature was requested in the old days. It certainly makes my life much simpler than having to zoom out so I can see enough of an overlapped frame to find the center point to grab, and I know many other users appreciate it too. I don't have a problem with making it a user prefernce, however.
    Basically, the selection priority is now reversed, is all. If you want to move a front object instead, you just have to click on a spot where it doesn't overlap the one you've selected.

  • I can't search for apps by pulling down on the home screen. Today view in Notification Center is turned off, but today view comes up when I pull down, not Spotlight Search.

    I can't search for apps by pulling down on the home screen. Today view in Notification Center is turned off, but today view comes up when I pull down, not Spotlight Search.

    Pull down starting in the middle of the home page, not at the top.

  • ICal day view upcoming events list--can it be turned off?

    Just upgraded to 10.7 and the changes to iCal (v. 5.0.3) are horrifying. I plan most of my daily work on iCal and really need the Day view of the calendar to fill most of the window and show more details on my calendar items as it did before in 10.6. As it is now, the left half of the screen is now taken over by a list of upcoming events which gives the daily view too little space, so all my calendar items and notes are truncated. Makes it very difficult to work with. Is there a way to turn that upcoming view off? I don't understand why it's there. If I've selected "day" as my view option, it stands to reason that I don't need upcoming events for this week. The rationale behind that being there taking up all that unnecessary space is beyond me.
    Barring that, anyone have any suggestions for an iCal replacement? I have a long list of other complaints but this one is a big one. If I can't fix this, I need to move on to something else.

    Same question here... over a year later!  Mine's about iCal 6, but it's the very same issue.
    Cannot stand the scrolling list of events.  When I select a day view, I want to concentrate on that day's events-- and not see a long list of other events for other days!
    Rick, did you ever find a solutiion?  Maybe there's a hidden Terminal command to turn it off.  I kept looking for dot within the pane divider to collapse it, but it's not there.  Nor is there an option under Preferences!
    Long live Snow Leopard and the old iCal!

  • Selecting photo then clicking "Fit" does NOT turn off the Ken Burns effect.

    Trying to wean from iMovieHD.  I'm having trouble mastering what seems to be more limited Ken Burns effect functionality in iMovie11.   I don't seem to have the range, say, left-to-right, as I did in either iPhoto or in iMovie HD.
    So, I figured for now I'd turn off the Ken Burns effect on all the stills in this project.  I've tried selecting one photo, getting into the Fit/Crop/KB effect viewer, then clicking Fit, then Done.  But the photo keeps the KB effect that had been applied to it.
    I tried changing all photos in Preferences and that didn't change anything either. 
    Hopefully I'm just missing something?  Thanks for any help, everybody...

    Nevermind.  Got it.  As I'd hoped, user error.

Maybe you are looking for