Turn off clip spanning from Canon XF?

Hello.
I'm importing MXF files from a Canon XF300. It breaks long clips into 2gb chunks, and when they're imported into AE it treats it as one file. I'd like to be able to, say, import the fourth segment by itself without the clip spanning. No matter which segment I import it's still treated as one. Sometimes it's easier to find the section I want when working with smaller chunks. How does AE know it's one sequence, and is there a way to turn it off?
Thanks

I'm using the latest CC 2014.
If the clip is under 6-7 minutes and it's less that 2gb it's fine. It's when there's a long continuous shot for say 20+ min. that it's broken into 2gb or so chunks. It doesn't matter which of the 4 files for instance you import, you always get the whole thing. Sometimes I'd just like to work with the 3rd chunk so I don't have to scrub through the whole thing, especially when I'm wanting to only use a small section of the long shot.
I don't know how it knows, it's not in the xml file the camera products so it must be in the MXF wrapper or something.

Similar Messages

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How can I turn off text messages from my iPod touch

    How can I turn off text messages from my iPod touch

    Go to Settings>Messages and turn off.

  • How can I turn off the GPs from my iphone 3g?, How can I turn off the GPs from my iphone 3g?

    How can I turn off the GPS from my Iphone 3G?

    If you go to Settings > General you can turn off "Location Services" and that will do it.

  • How can I turn off the ability to turn off the phone from the lock screen for more security?

    How can I turn off the ability, to turn off the phone, from the lock screen for more security?

    There is no such option.
    There will be some additional features included with iOS 7.
    http://www.tuaw.com/2013/06/10/ios-7-to-include-security-feature-dubbed-activati on-lock/

  • How can i turn off the icloud from my pc

    how can i turn off the icloud from my pc

    If you go to Settings > General you can turn off "Location Services" and that will do it.

  • HT204053 how do i turn off my iCloud from my computer if i have to restore my phone?

    how do i turn off my iCloud from my computer if i have to restore my phone? when i switch on my phone the message is
    "activation error" and when i connect it to itunes and click restore the message is "switch off your Find my iphone from the settings and then proceed"? what should i do now?

    Try this link for activation problems ...
    http://support.apple.com/kb/ts3424
    If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account.  (The BETA recently went past it's valid until date.)  There are discussions about this issue.  Otherwise...  for non-developers, I'm afraid you're on your on.  Use Google.

  • How can i turn off text messages from coming on my iMac

    how can i turn off text messages from coming on my imac

    Go to Messages->Preferences->Accounts and in the section labeled You can be reached for messages at: make sure only you telephone number is checked. Uncheck any email addresses that are checked.
    You mat have to do this on the iPhone also, I'm not sure.
    regards

  • 'turning off' all filters from multiple clips at once???

    FCP 5.1.4
    Is there a way to collectively disactivate or turn off the filters on a group of clips all at once?
    I'm making a spot using the material from the film. The master film sequences have a lot of filters assigned ... but the sequences are no longer rendered. I want to pull diverse shots from the film without having to either render, or delete the filters. Once the clip is cut I'd like to be able to just turn the filters back on prior to exporting the new clip out.
    All ears,
    Ben

    Is there a way to collectively disactivate or turn off the filters on a group of clips all at once?
    As already mentioned, no.
    However, you can turn off filters for an entire sequence. Go to Sequence Settings (Command-0, that's zero) then the Render Control tab and uncheck the Filters checkbox. Of course, be sure to toggle it back on before you export.
    Not sure how well this translates to nested sequence though...

  • Turning off color managment in Canon Pro-10 printer driver

    Hi,
    I am using Lightroom 5 to print to a Canon Pro-10 printer. How do I disable the color management in the printer driver. I have selected the appropriate canon PRO-10 profile in Lightroom and it says to turn off color management in the printer driver dialogue box but I don't see where / what to do

    "my monitor has been calibrated"
    I hear this all the time.  It is the main reason I don't like all the calibration gadgets out there.  You need to "calibrate" your monitor to what your printer is printing.  Not some spec some gadget thinks it should be.
    You need to know what the bias of the printer is.  In this case Canon has put a reddish bias in it's printers to simulate a warm look.  This condition will not be accounted for in calibration software or monkeys.
    Get your brightness, contrast and grey-scale right and the rest will take care of itself.  You can do the necessary corrections in LR to make up for, or leave as is, the warm tone from the printer.
    BTW, you should be working in AdobeRGB or higher.  Factoid, you can not get every color to match.  This is not possibile.  You are dealing with two completely different mediums.  Light and dyes.  Adjusting any color effects other colors as well.
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • How to turn off color management in Canon MX860 for printer profile

    I just got my Spyder3Print updated with the SR software to calibrate my Canon MX860 on a Mac OS X system. I am using 3rd party paper (Kirkland) and 3rd party ink (uni-kit). There are no existing .icc profiles out there for this combo. I have been using canons "GL2/GL3" profile which does not give me, as expected, a good color match.
    When the program asks to print the target it says to make sure the "color management is off".
    I cannot find an "off" selection. In the "color mode" portion of the dialog box I do get to choose between "colorsync" and "canon color matching"???
    I was guessing colorsync and then I have to pick a printer/paper/ink .icc profile. Not sure what to use for this first target print.
    Not sure if that choice represents color managment off?

    Just got the answer from Spyder:
    his applies to ALL Canon printers drivers running under both Leopard and Snow Leopard and it's the correct "solution" to get them to print without color management (a critical, unavoidable requirement for building custom printer profiles with any 3rd party printer profiling solution).
    Make sure you're running OSX 10.6.2 or whatever the latest is. There have also been some Canon driver updates that will show up in System Preferences:Software Update, so make sure you've got nothing left to apply as an update. Another way to make sure you have the latest Canon driver installed: go to Print & Fax, select your current Canon driver, and click on Options and Supplies... to see what version it is. (It should be 10.26.0.0 or later, and here's the Apple list of latest drivers for all printers):
    http://support.apple.com/kb/HT3669
    If you don't have the most recent driver, then click "-" to remove the older Canon driver from the list. Then, with the printer attached and powered on, click "+", and add back the driver for it (this should download and install the latest version for you).
    Now: when you PRINT and want to turn off color management in Spyder3Print, THIS is the way to do it:
    In the Color Matching pane of the driver, select ColorSync (not Vendor Matching, or Canon Color Matching!)
    In the popup beneath that, you'll see "Automatic"; a list of all the Canon standard profiles; and a command to choose from other profiles. Use that last command to see a list of all profiles on your system.
    Select "Generic RGB" from the list. (this is the key). Then say OK and you'll see that "Generic RGB" shows beneath the ColorSync radio button in the Color Matching pane. This is the secret to disabling color management with the Canon drivers in Snow Leopard (and it also works in Leopard, as well, although in that case, a warning gets displayed underneath "Generic RGB", which can be ignored)
    Select the paper type, output quality, resolution, etc. as usual and print the target sheet. (Just leave the Color Options pane alone)
    NOW you should get a properly dark (non-color-managed) target print. Measure this and build a profile.
    Printing with "No Color Management" from Photoshop actually works the same way. It invisibly pushes through "Generic RGB" or an equivalent when you choose "No Color Management" in its Print dialog, This is why, in the Color Matching pane of the driver, ColorSync subsequently comes up auto-selected and also disabled; Photoshop has done the same thing I just described "under the hood" and as a result, that choice in the driver gets "locked".
    When printing through the profile in Photoshop: do it the usual way. (Photoshop Manages Colors, choose the profile, Saturation intent, etc etc etc). It should work fine.
    When doing a test print from inside Spyder3Print: since Spyder3Print applies the profile internally to the image data before it's sent to the driver, you should set the driver up exactly the same as when you printed the target image (as I've described above), so this would be ColorSync:Generic RGB in the Color Matching pane.

  • How do you turn off the passcode from iphone 3gs?? I do not want to get prompted every time I turn on my phone!!!!

    How do you turn off the passcode feature from iphone 3GS?? I do not want to get prompted every time I turn on my phone.

    Settings > General > Passcode Lock
    You're going to really regret this if you ever lose your iPhone.

  • Turn off banner/titlebar from inside customize...

    Is it possible to turn off the banner/titlebar programmatically from your Edit/Edit Defaults page rather than from the Edit Region Settings (for the entire page)
    The call to PortletRendererUtil.renderPortletHeader(pr, out, headerTitle); seems to determine that it needs to render the title bar or not dependent upon these region settings.
    My thought would be to control the same thing it checks before it calles the renderPortletHeader.
    Ideas? Thanks.

    Well Stix Hart, I was starting to think I was going to have to wait FOREVER for the answer :-)
    Hehe, that was awesome, works like a charm. I totally forgot about using the Place dialog, let alone looking there for the setting.
    Thank you!
    Paul

  • How can i turn off facebook messages from coming to text messages?

    I can not figure out how to stop facebook comments from coming to my phone as a text, can anyone help me?

    Hello! your going to want to get into your face book notification setttings. I'm not 100% sure on what exactly you'll select but you'll see the option to turn off the text message notifications on facebook.

  • Turning off Colour Management in Canon Pixma Pro9000 mk 2 ??

    Hi
    In the Print area, Lightroom 4 says in italics at the bottom to turn off the colour management in the Print Dialog if you're chosing to print with a profile.
    Can someone show me how to do this with my Canon Pro9000 mk2 via OSX Lion 10.7?
    Being thick but can't work it out.
    Thanks
    Stuart

    Hi Rikk
    Thanks for that. Are you 100% sure though. I'm getting really poor results when I use the Canon Photo Paper Plus Semi Gloss ICC profile (with the right paper!) compared to letting the printer do the colour management. The colours look like they've been worked over twice with a horrible reddy pinky effect on skin tones. It's the same colour problem I had with Windows until I figured out how to turn it off manually.
    Also not sure why Adobe would have the message on the Mac version of Lightroom if it was going to turn it off automatically anyway.
    Any ideas?
    Cheers
    Stuart

Maybe you are looking for

  • How to calculate output page size of pdf map request?

    Hello, i have a problem regarding requesting a map as pdf and the resulting page size of the pdf in MapViewer version Ver11_B071001. i defined a bbox in srid 82015 that has a width of 297m and a height of 420m. The scale is 1:1000. According to the d

  • How to Run a simple program using JMS Queue.!!

    Hi All, I am trying to run simple program on JMS Queue. Using SOA Suite 10.1.3.2 I created a connection factory and queue using EM. Connection Factory => Domain : Queue JNDI Location : jms/sidConnectionFactory Queue Name : SidQueue JNDI Location : jm

  • What are the differences between Applet and Swings

    Please let me know the differences between Applet and Swings.

  • Problem in activating User Exit

    Hi I need to create a user exit for SDTRM001 for transaction VA01. This userexit is containing a Function Module EXIT_SAPVSTRM_NO_ATPCHK_001. But when I try execute transaction VA01, this is user exit is not getting called. So, I tried debugging the

  • Add PDF report type to TestStand

    We have created a PDF report generation method.  We would like add "pdf" as a selection in the TestStand report options editor screen.  Has anyone else added a new report generation method to TestStand?  Will we have to modify the support model dll t