Turn off dual line ringing on spa509g

Hi,
I have a UC540 installed with 12 spa509g handsets.
The customer wants to know if dual ringing can be turned off on the SPa509g handsets.
The customer wants to give the caller a busy signal or voicemail when there is a second caller.
Kind Regards
Ray

The only way I have found to do it is through the GUI or command line.  CCA does not support silent ringing.
Ryan

Similar Messages

  • Turn off shared line ring UC520

    Is there a way to turn off ring tones, on shared lines on the UC520?

    The only way I have found to do it is through the GUI or command line.  CCA does not support silent ringing.
    Ryan

  • Turning off (somehow) the ringing of FaceTime on mac OS X during Handoff calls

    hi
    Handoff is great. Love it.
    But I need to be able to turn off FaceTime's ring on the mac during the Handoff.
    What I want to avoid is the ringing of incoming FaceTime calls when I am not at my mac, and I am answering the incoming FaceTime call on my iPhone during that time.
    Is the FaceTime incoming ring actually a Notification and can turn off Notification sound of FaceTime?
    or can the ring be stopped maybe by stopping rings if the mac is on screensaver?
    there must be a way...
    thanks

    hi
    thanks.
    but it seems more difficult. as per below review of handoff in yosemite included the following info about doing just that:
    The FaceTime app will let you choose a ringtone for phone calls, but only from the stock collection of iOS sounds. (I even added ringtones to iTunes on my Mac, but it didn’t see them, and even if you find where the ringtone files are stored you can’t add new ones.) Ringtone selections were played on my MacBook’s internal speaker, even though the rest of the Mac was playing through an external audio device.
    (this is from this review:  http://sixcolors.com/post/2014/10/os-x-yosemite-review/)

  • Turn Off Dual Display

    How do you turn off Dual Monitor Display without detaching the DVI cable connected to my other monitor?
    I have an Intel Imac.

    I believe the act of removing the dvi connector automatically turns it off. Turn the 2nd monitor off and then simply remove the DVI cable from your iMac. Your screen will go blue or change for a second and then come back in. There will only be 1 monitor listed in the display preferences, your iMac monitor. I don't think you can turn if off without doing so unless someone has a hack. At least as far as I know.

  • On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

    On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

    Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

  • Turn off new line indicator?

    I somehow managed to turn on the end of line indicator icon
    in my Flash 8 IDE. It also shows a dot for all spaces and >>
    for all tabs. Would any of you know how to turn this off?
    Thanks!
    solidtran

    ummm, i'm sure it is me but what's the "end of line
    indicator"? never heard of that before. It shows
    a "dot" for all spaces and tabs? Is this really in the Flash
    IDE? I'm stumped.
    --> **Adobe Certified Expert**
    --> www.mudbubble.com
    --> www.keyframer.com
    solidtran wrote:
    > I somehow managed to turn on the end of line indicator
    icon in my Flash 8 IDE.
    > It also shows a dot for all spaces and >> for all
    tabs. Would any of you know
    > how to turn this off?
    >
    > Thanks!
    >
    > solidtran
    >

  • Turn off Iphone 4 ringer when headphones are in.

    When speakers or headphones are plugged into the jack, the ringer still rings through.  I have seen a couple of posts on turning the ringer off, but they seem to only be work-arounds such as forwarding the phone.  Is it actually possible to turn the ringer off while something is plugged into the jack?  If so, how do I do this?

    The only way to do this would be to flip the mute switch on the side to silent. This is by design. So you don't miss a call if you take the headphones off for a moment or two.

  • Turn off diagonal lines on locked audio track?

    Hello,
         Not sure if I missed the option somewhere, but it's a bit difficult to read the waveform when I lock the audio track.  Is there a setting that removes that overlay?
    Thanks,

    Something that might help is to expand the vertical zoom of that Audio Track. In the Track Header, hover the cursor around the junction between Tracks, until it turns into a double-line with vertical arrows - Click-drag. That will give you a "taller" Waveform, from which to work.
    Good luck,
    Hunt

  • Turn off Vibration on Phone on Ring without turning off Vibrate on Message?

    I have in Sounds>> Vibrate On Ring and Silent both ON. I have a vibration and ringtone chosen for my Phone notification, and a vibration chosen for my Message notification. What annoys me is that when I have my phone switched to Ring, whenever I get a call, my iPhone rings and vibrate at the same time! I'd like to be able to let the phone only ring and not vibrate. If I turn OFF Vibrate on Ring, the Phone doesn't ring when switched to Ring anymore, but when I get messages, it doens't vibrate anymore. Is it possible to only let the phone Ring when switched to Ring, and let the messages vibrate as well?

    http://support.apple.com/kb/TS3221

  • How do i turn off the external speaker on my brand new iPod touch

    how do i turn off the external speaker on my brand new iPod touch - it is very annoying

    Just turn the volume fully down using the lower button on the upper left side of the iPod.
    You can also go to Settings>Sounds to turn off alert and ringer sounds.

  • How do I Turn Off Slices in Photoshop?

    I've been three days searching from within Photoshop CC 2014 on a Mac and exhausted, can't find what must be under preferences but no clear indication at all.
    Can someone help with the correct way to turn off the lines and measurements that pop up continually while I am trying to work in Photoshop? I would think that these would be off by default.
    TIA,
    Ken

    Glad to help. Now that I know it's the move tool, I can give you a better answer.
    Sometimes when a tool exhibits odd behavior, It's usually settings are changed or corrupted.
    For example, "Show Transformation controls" may have been checked on in the Options bar.
    There you would see the lined transformation box with handles and the values I directed you to turn off.
    But if that's not the case, you can Reset the Move tool to its' defaults.
    In the Options bar, ctrl-click on the Move tool and select "Reset Tool"
    So try that and see if it helps.
    The transformation values were meant to be a "heads up" feature. That is you could see the values change instead of glancing over to the Info panel all the time.

  • Turn on, turn off processing for SW 4900M & 6503

    I want to use cisco command to turn off switch 4900M & 6503. 
    And how i can turn on or turn off these switch?

    You can turn off the line cards but you'll never be able to power off the supervisor card.  

  • Turn off vibrate on alarm only

    Hello,
    I have an iPhone 6 with iOS 8.1.2 and I use the alarm to wake up every morning. I prefer to wake up to sound only without any vibration. If I turn off "Vibrate on Ring" in settings the vibration for the alarm also turns off, which is great. Unfortunately if I forget to turn it back on I will almost certainly miss phone calls or other notifications and on the flip side if I forget to turn it off before bed I have a heart attack when the phone starts vibrating with the alarm . Is there a way to leave the vibration on when the phone rings but have it off for the alarm? This would avoid me have to switch it back and forth everyday.
    Thank you

    Hey Mike,
    You and I (and I believe a whole slough of people) have the same issue with this.  It drives me up the freaking wall!  Apple picked their fruit too early on this oversight.  I have the iPhone 4S and it's the same song and dance.  Everything your post says, is what I came to the interwebs for.  C'mon Apple!!  Address this issue that is driving people a little more insane with each and every alarm that goes off.  I'm checking if the Samsung devices have this sorted out properly.

  • BT Feestyle 650- How do I turn off all ringtones

    How do I turn off all ring tones as I need to have no sound when I sleep, yet need to pick up voice-mail
    I have turned off sound on the handset on internal and external sound on both phones yet there is still a heard ring?
    Thank you

    Welcome to the forum. Have you turned off the base ringer?
    You can click the white star next to this message if you think it was helpful.

  • Turn off all vibrate

    How do I turn off vibrate on alarm clock?

    First, you turn ON the side mute button above the volume buttons.
    Second, go to "settings" then "sounds" then turn OFF Vibrate on ring.
    At least it worked for me...
    FYI - I have the iphone 5, 6.01 os.

Maybe you are looking for

  • Multiple ORACLE_HOME issue

    Hi all, I have a RAC (Oracle 10g) environment on AIX machines. I have 6 databases located in one "/opt/oracle/rdbms10g" and just one located in "/opt/oracle/rdbms10r1". First thing I do is to start those 6 databases (which are starting without any pr

  • Lion Safari 5.1: pdf file is not opening inside the iFrame

    "When trying to open the pdf file inside the iFrame, it is opening outside the iFrame in Preview Application and leaving behind the iFrame as blank . Earlier with Safari 5.0.5 version this problem was not coming and pdf was opening properly inside iF

  • GoLinks and passing parameters to external sites

    I am trying to have a goImageLink (or goLink or goButton) that takes the user to another site. The destination url is expecting parameters. Example: http://www.abc.com?param1=xyz&param2=wxy I've seen a few examples of something similar to this, and I

  • Supplier list not available

    Hi, I have created sales order successfully using the id proc_sales. while creating PO using proc_agent user, I need to assign the supplier to the sales order qty which is required to be procuired. Now when  I am going to select suplier, It is not sh

  • Is it possible to copy/duplicate a DVD with this program?

    Hi, I made a movie with iMovie and iDVD earlier this year and switched computers, so I had to transfer the files onto an external HD. Now, when I open the file in the new iMovie, the audio is lost, and when I open the iDVD file in the new version of