Turn off Duration in Aggregator?

Is it possible to turn off the Duration in aggregated projects?
WE are giving an estimated time to complete a module at the beginning of the module. But in the aggregated project, the duration times do not reflect the ACTUAL time it would likely take someone to comoplete the module. Can I modify or disable the Duration features in Aggreagator?
Thanks!
JT

Paul Dehurst has a widget that will hide the Duration in the TOC (http://www.raisingaimee.co.uk/index.php?option=com_content&view=article&id=118:hidetoctime &catid=31:captivate-4&Itemid=55). It does not work with the Aggregator, but if you contact him and maybe throw a donation his way, I know he can modify the widget. This is of course, if he has time.
Please note, that Paul has said on his site home page that he has retired. Still, I would contact him - it couldn't hurt.
Pam

Similar Messages

Screen turn off duration

Hi,
the screen of the iPad is quite long on when not used. Is there any way to adjust the duration of the screen being active until it dims and then truns off? I think on the iPhone this possible to adjust.
Thanks.
KM

Settings > General > Auto Lock

Turn Off Slide Duration Web Gallery Output

I am using CS5 Bridge, I would like to turn off the slide duration feature on the web gallery output. The box requires a value.
If the product will only produce web gallery output with a slide duration is there a way to hack the html output and remove it manually?
What is your opinion of installing the legacy web gallery plug in.

Dan:
You can temporarily disconnect from the internet, unplug the modem to computer cable. If you're wirelessly connected then turn off the Airport on the Mac, not the base station.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Macbook Pro 10.6.8 will not turn off, restart, or even sleep after upgrading to OS X Mavericks

It was working fine for the first 4 days until now, the computer won't turn off, won't restart, and won't sleep. When click on those button, the computer has no response. Also the iMessage App appears to not working as well. I tried forced turn off by holding the power button, but then it takes about 1 to turn back on. And now after it is on ago, it won't turn off again. And the Imssage is not working again. Other apps seems works just fine. Any suggestion?

Hi, Kinshinhh.
Thank you for visiting Apple Support Communities.
I would recommend processing an SMC reset on your MacBook Pro.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If experiencing issues with messages, try the steps in the article below.
Connection Doctor
In Messages, you can select Video > Connection Doctor to assist you with possible connection issues. Connection Doctor shows the following details:
Statistics–With the following details
Chat Duration–How long the chat has lasted.
Frame rate–The number of frames per second (fps) that video plays.
Bit rate–The average number of kilobits that one second of video data uses (kbits/s).
Frame size–The resolution, in pixels, of the video. The mew pixels, the more detailed the image.
Audio and video quality–100% means no loss of quality. Issues may occur if quality falls below 90%.
Capabilities–A pane that shows you what capabilities you have based on your computers hardware and Internet connection.
Network Statistics–Displays information about your bandwidth settings and network router type.
Bandwidth limitation–Indicates whether the bandwidth has been limited to a particular speed in Messages.
Tip: Click "Settings…" to open Messages preferences and adjust your "Bandwidth limit:" setting.
Router type–Identifies the kind of network address translation (NAT) router your computer is using to communicate with other devices. Router type are:
Tip: Consult with your network administrator, if you have a router type other than "Full Cone".
Full Cone–Anyone on the Internet can send replies to the computer.
Restricted–The router associates the translated address and port with a particular destination address. Replies from other addresses are filtered out.
Port Restricted–The router associates the translated address and port with a particular destination address and port. Replies from other addresses and ports are filtered out.
Symmetric–THe router associates the translated address and port with a particular destination address and port, but uses ad new translated port for each destination address and port.
Unknown–The type of router could not be determined.
Error Log–Inspect reported errors in the Messages error log. Note: This option is dimmed if there are no errors present.
Mac Basics: Messages
http://support.apple.com/kb/HT5395
Cheers,
Jason H.

How to turn off ken burns effect in new imovie

The new iMovie---11-- how in the heck do I turn off the Ken Burns effect? Nothing against Mr Burns but.... I don't want everything to move!
Thanks!

Go to File/Project Properties and you can define the default behavior for adding stills to your project.
After clicking File/Project Properties, you will click on the Timing Tab. There you will see how to set the default still photo duration and the initial photo placement.
You an set it as Ken Burns, Fit, or Crop. You can always change it later in the Rotate, Crop, Ken Burns tools, but if you are importing a lot, it makes sense to set the default as the one you are most likely to need.

How to turn off Ken Burns Effect

Hello
working with iMovie HD 6.0.4
I do have iMovie 11, but can't figure out how to manage more than one soundtrack (Movie and Music).
So back to iMovie HD 6.
I searched the Help section regarding turning off Ken Burns Effect.
This is what it says:
To remove the pan and zoom effect from a photo in your movie:
Select the image in the clip viewer or timeline viewer.
Click the Media button, click Photos at the top of the Media pane, and then click Show Photo Settings.
In the Photo Settings window, deselect the Ken Burns Effect checkbox.
Click Apply.
BUT: here is NO checkbox to deselect Ken Burns Effect.
Anybody know what happened?
The reason I want to get rid of it is that zooming makes stills unwatchable. I it barely ok in iPhoto but in iMovie, the resolution is totally messed up.
It would be great if somebody has an idea to turn off Ken Burns Effect.
Thank you
Christian

Go to File/Project Properties and you can define the default behavior for adding stills to your project.
After clicking File/Project Properties, you will click on the Timing Tab. There you will see how to set the default still photo duration and the initial photo placement.
You an set it as Ken Burns, Fit, or Crop. You can always change it later in the Rotate, Crop, Ken Burns tools, but if you are importing a lot, it makes sense to set the default as the one you are most likely to need.

How to temporarily turn OFF Spotlight Indexing?

It was suggested to me that it is best to turn off spotlight indexing for the duration of an initial clone backup of your system drive. How can this be done? Thanks.

The advice you have been given is incorrect. There is no need whatsoever to turn Spotlight off even temporarily. Just prior to the cloning you should check that indexing of your boot volume is not occurring - simply because the competition for CPU will slow the cloning down. Just click on the Spotlight symbol at the right hand end of your menubar to see that you only have the text entry box.
Also, there is usually no need to have a clone indexed, and so you should put the target volume into the Privacy tab of System Preference / Spotlight -- that will ensure that your target does not start to be indexed during the cloning and that the target volume does not become indexed later. Should you ever need to work on the clone and want it to be indexed, just remove that volume from 'Privacy'.
Ignoring any references to Carbon Copy Cloner, see http://forums.bombich.com/viewtopic.php?t=14531.
Andreas

Turning off Sections setting in Pages '09

Is there any way to remove the Sections setting in pages 09? I'm creating a document, and no "sections" are required. When it groups pages together, and adds extra blank ones, it becomes quite a hassle. Any ideas as to how this feature can be turned off for the duration of the project?

Hi almatarazzo
Welcome to the forum.
There are 2 modes in Pages:
*Word Processing* where pages run from one to the other and text flows automatically from one to the next.
Layout mode where every page is separate and you must create textboxes to put text in and to link them if you want text flow. In effect every page is a section of its own.
If you are having extra blank pages it is probably because you have text wrap on images and/or you hammering away at the return key to position text and have some stray returns spilling over at the end of your page.
+Menu > View > Show Invisibles/Layout+ to see what is spilling over and to delete them.
Peter

Do I have to charge my iPhone during 12 hours when it turn off ? I just bought it

Do I have to charge my iPhone during 12 hours when it turn off ? I just bought it

Charge your iPhone whenever you want to. There are no limitations on when or the duration of charge. Normally it will charge in 3-4 hours with the wall charger, longer if you use a computer USB port.

Cannot turn off passcode after ios8 upgrade - iPad mini

Upgraded iPad mini to ios8 and cannot turn off the passcode. In settings, I can turn it off but it tells me that I need to set a passcode within 60 minutes. It then counts down and requires me to set a passcode once 60 minutes are up. Also does not let me change duration of passcode (from immediately to 4 hours for example). Any thoughts on how to turn it off? Thanks.

is this your iPad or one administered by someone else...for example if I use an iPad from work our IT policy dictates that I must use a passcode and I am not allowed to turn it off.
If it's yours, just a shot in the dark, do you have restrictions enabled? If so, go in and disable them then see if that will allow you to turn off the passcode lock.

Can I turn off XHCI on new Mac PRO?

I am interested to get a new Mac Pro. I am a bit disappointed that there are only four USB3 Ports. I know that there are expansion appliances and devices that will provide a few more. here is my issue, which will determine if I am a buyer:
I will need to turn off XHCI, reverting to USB2, and hopefully on a port-by-port basis. Now before anyone jumps up and tries to tell me that XHCI will support USB2, I can tell you for provable certainty that XHCI is not truly backwards compatible with USB2. USB2 is an emulation under XHCI. There are some devices that will not run under such an emulation. One of them is the Microtelecom Perseus SDR Radio. I am a collector and SWL enthusiast of 35+ year duration. SDR (Software Defined Radio) is the newest, and very exciting development in Radio. Few are made with MAC OS compatibility, so I run them in Virtual Machines, under Parallels. This works handsomely on my Mac Pro 1.1. But my Mac Pro is long in the tooth. I would like to replace it with a new Mac Pro. But only if I can turn off XHCI. Also please do not wax on about how the manufacturers of such devices should upgrade to USB3. That is not an option for radios that were made 10 years ago.
There must be a way to do this. Apple must certainly want to market the Mac Pro to the Scientific Community, many of whom have devices which are USB2, and finicky about their connections.
I would prefer to turn off XHCI on a port-by-port basis, or to find an extension/expansion device that is not a simple passthrough of USB.
I asked this question at the Apple Store here in San Francisco today, and no one had an answer, or knew what I was talking about. My question was escalated twice to supposedly more knowable persons, none of whom had any idea what XHCI is.
Anyone here know?

No response here in 3 days, so no one knows.
I did manage after a few tries to get an Apple Tech on the phone through the Sales Dep't. He said that there is no way in the Mac OS to disable XHCI settings, and while he recognized that PCs offer control through BIOS, that Apple offers no access to BIOS. He said further that one might discover a way through the Terminal app, but that Apple would not support that if done by a user. So I am NOT going to spend $3500+ on a new computer to have to hack it, and put Support and Warranty in jeopardy. No new Mac Pro for me, no sale for Apple. I may look for a refurb or eBay used Mac Pro 3,1-4,1-5,1, where I can drop in a PCIe USB3 card, and have both for my use, as I wish; nine hardware USB ports sounds good to me.

How to turn off spelling check in iCal

hi, i am new to mac (yeah, i finally made The Transition) and i have the latest Mac OS X Version 10.6.3. would anyone please advise me on how to turn the spelling check off in iCal. i can't seem to find any right answer. thanks a lot.

A post from April 2010 and a similar question from 2009, both unanswered. Does this mean iCal spell checking can't be disabled?
I find it outrageously annoying, worse than ordinary annoying, because the calendar is full of ten-dollar words like surnames that will always note as wrong. It's like having a surname highlighting feature. I can't even turn it off in a single event because the next time I launch iCal it's back on again by default. For that matter, why is the active toggle there at all if you can only turn it off for the duration of a session? I suppose I've adapted by turning it off manually every time a red squiggly appears, but I haven't stopped thinking about it.
Is spell check impossible to turn off permanently?

Turning off the charging LED?

Dear Sony,Appologies if this is already covered, searching just finds old issues with LED and stamina.I'd like to disable the charging LED. I've started using a dock at night and I can't hide it by butting the phone face down. I've solved the issue of notifications when I'm asleep with the Smart Connect SW turning off all data so I can't get them but the charge light is annoying. Should this not be an option in Smart Connect to disable LED and then use the between hours to activate? The only option I can find anywhere is the 'pulse notification light' that seems to do nothing. I'm running the Aus unbranded .253 software.Thanks

Ok there is a way around it - HURRAH! not fully tested it but it seems to work so far. Download lightflow This method is based around the logic of if you can't stop it flashing, at least we can make it so dark/dull (and static if you prefer) that you won't even notice it. You will need to create notifications for both charged battery and charging battery.So... take Charging battery:Under Notification tab:- put a tick in Enable notification- exclude from sleep modeUnder Light tab:- Put a tick in Enable ligh- Select Notification colour- Go for Custom Colour- select bottom right - the blackest / purple-ist you can find!- hit ok-Select Light duration - here either chose always on or very slow depending on how sensitive you are - I found always on less distracting than waiting for it to flash, no matter how the dark the light is.- change light duration to either do not automatically switch off if you NEVER want to see the charging light, even in the day, or say Stop after 8 hours instead.- If opting for flashing rather than a static light, change LED flash rate to Custom LED Flash rate and fiddle with the milliseconds - extend the off part by many zeros! Repeat for Charged battery option. That's it - good luck and happy sleeping. Melanie

Cant turn off the ken burns effect

The ken burns effect (why is that on by default for crissakes?) cannot be tuned off!!!! I have about 10 images in a movie made up of about 100 still images on which the ken burns effect cannot be turned off. I tried unchecking the ken burns check box & hitting the update button, but it immediately turns itself back on!! Tis is with iMovie 3, and as i said, it affects only the first 10 or so images in this particular project.

I know, sometimes it feels like Ken Burns has a mind of its own. It WILL do what you want, but first you have to figure out its rules.
The most important is that all of the Ken Burns settings, the KB checkbox, zoom, pan and duration are controlled by the LAST imported clip you made, or a previously-imported clip you clicked on. THAT's what sets the default setting for your next import(s). (A very nice feature, by the way, for it lets you apply the Ken Burns settings of one clip to the next photos you import. You don't have to reconfigure settings each time.)
That also means that when you uncheck the KB checkbox that won't "stick". When you click on some other clip it may change.
So when updating an existing clip, the trick is to select the clip, THEN adjust the Ken Burns settings, THEN Update the clip.
A complicating factor is that previously-imported photos to which special effects or other editing has been applied are no longer considered Ken Burns clips, so clicking on them doesn't have the same result.
So pay close attention to what you click on, and even closer attention to whether or not there is a clip selected or an image selected in the Photos pane selected. iMovie will select a photo on its own when you haven't selected something.
It works like you want, but first you have to see that what it does is you want.
Karl

Indexes - turn off and turn on

I have problem with performance in my application. Exacly the problem is with indexes.
I've got table with two indexes. I need to insert to my table 40 000 records. So I need turn off indexes before inserts and turn on them after inserts.
Question: how to turn off and turn on indexes. (Oracle DB version: 8 and 9).
[I know how to drop and set indexex, but I want turn it off and on.]
How can I do it?

Madrid,
If you're doing large loads of data on a table with many indexes, it can be very helpful to do:
for each index on table:
alter index <index_name> unusable;
then do:
alter session set skip_unusable_indexes=true;
then do:
bulk data load into table, optionally with nologging
then do:
for each index on table:
alter index <index_name> rebuild; --optionally add nologging here
For the duration of the load, the indexes will be 'ignored'. The idea is, invalidate the indexes, tell Oracle not to attempt to maintain them, bulk load the data and then rebuild the indexes after the fact.
Note that, as mentioned above, for the small volume of data mentioned in initial post, it's probably not worth it. but if you've got a few hundred million rows to load, the savings can be enormous.
-Mark

Turn off Duration in Aggregator?

Similar Messages

Maybe you are looking for