Turn off information text after CIVS-IPC-2935 restart

After CIVS-IPC-2935 is restarted, on picture I see information about model, version, configure done, and sw1 and sw2. How I may disconnect this?
May be problem in not configured sw1 and sw2 ?

I finally figured it out. Just in case anyone else has the bad luck to do what I did, here's what it was:
I'm not quite sure what caused Universal Access to come up by mistake the first time (weirdness #4 in the previous post), but at any rate it seems that while clicking some setting or another in Speech, and perhaps clicking too slowly, the click was intercepted by Universal Access instead. All the features I mentioned were settings in Universal Access. So by going into Universal Access intentionally, I was able to restore all the settings back to normal -- all except #4, anyway, which, if it happens again, at least I'll know what to watch out for.

Similar Messages

Can't turn off twitter text in iphone4s. Tried settings, notifications, twitter is not an app there. Also tried settings, sounds, tweet, none, and still won't turn off notification for twitter texts.

Can't turn off twitter text notifications. I tried settings, notifications, but the notification center doesn't have the twitter option. I also tried settings, sounds, tweet, none- for alert tones. This is still not turning it off. Twitter people said it's not their problem. Is anyone having this problem?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Turn off the text when viewing

What is up with this and how does one turn off the text. Adobe Reader after scanning

Adobe Reader doesn't scan. Acrobat provides links to drivers that your scanner provides to let it appear Acrobat is doing the scanning. A scanner will make a picture of the page you are scanning. It cannot turn on or off text. If there is something you do not want scanned you can use the scanner driver to not scan that part of a page. You can also use Acrobat's Redaction tool to remove any text or picture from the scanned image.

Cant edit powersetting for laptop to turn off the display after .. when power is plugged in

I tried to set the setting on a laptop in our domain from "turn off the display after 5 minutes" to "never".
the button is greyed out.
I tried the advanced settings, even that won't work.
Os on the laptop is windows 8.1 Pro, the laptop is a member in a domain.
Anyone knows this issue?
thanks,

Hi，
Are you referring to this?
Please check the policy Computer Configuration\Administrative Templates\System\Power Management\Video and Display Settings
(if deployed by a GPO created by server in a domain, then check Computer Configuration\Policies\Administrative Templates\System\Power Management\Video and Display Settings)
in the right pane, find "Turn off the display (Plugged in)", check whether it is configured to a specific data.
Yolanda Zhu
TechNet Community Support

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say.

HT4314 how do I turn off a game after playing so the app won't run down my battery?

How do I turn off a game after playing it so the app won't run down the battery. This has happened 2x and I have had to reset my phone.

To completely close an app (though a lot of apps don't remain active when you switch into a different app or go to the homescreen) : from the home screen (i.e. not with the app that you want to close 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

Turning off the text for a master data object

What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks

Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar

Outlook 2003 Suddenly cutting off email text after send

Hi everyone,
Some of my Windows 7 Users are experiencing a new issue with Outlook 2003 on their Windows 7 Pro computers. All systems affected are 64-bit. Most of our users are on Office 2003 and utilize Outlook with an in-house Exchange Server.
Just recently, in the last week or so, a few users have complained that after sending an email, a large portion of their message gets cut off. I've seen examples where emails are cut off mid-sentence. I suspect that a Windows 7 update maybe the
cause here, but I haven't been able to figure it out as of yet.
Does anyone know of any recent issues with any updates that might cause this? I suspect that it may have something to do with the IE 11 release and that some of our machines are updating to this version (which Outlook uses of course) and this maybe
the cause. This is the path I am using to troubleshoot, but wanted to see if anyone else with old software had experienced these issues?
Thanks!

32/64 OS Windows 7 with Outlook (office) standard edition 2003 - email set as HTML format and Word OFF as editor ++ IE 11 causes the issue here - cuts off the text AFTER the save on sending.
Reverting users affected to IE 10 seems to have fixed the issue here and using GP to lock out any options in IE to allow users to upgrade it and stopping any WSUS \ SCCM updates for IE 11 security to prevent it coming back down.
I guess we are all to blame as much as M$ - Outlook 2003 is over 10 years old and IE integration with HTML editor in Outlook was what we did in 2003 days - if we upgrade IE then its not a great surprise to find something breaks that relies on it.
I would be curious to know if this issue is affecting any of our Outlook 2013 \ 2010 friends with HTML formatting and using IE11 on Win 7 or 8.
I have licenses for our users to roll up from 2003 but its such a monster job I have hidden from it for..well 10 years due to training, macro and style manamgement issues and the shear pain I know will come out from users saying, "wehere my wee icon for
..." . BUT '03 is nearly end of life folks and although new does not = nirvana ((in fact I can't wait to find the many pains of 2013 Word and Outlook)) I suspect M$ will not be in a huge hurry to write a fix for a product that they are canning for support
soon - so I guess we either roll down to IE10 or roll up to 2013 Outlook.
Robert Crichton

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on-

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…

http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

Can you turn off repeat text message alerts in ios 7?

Can you turn off repeat text message alerts in ios 7?

Settings/Sounds/Reminder Alerts
Set to None.
But this will turn them off for other alerts as well.

Can we turn off calls, text, & data but not wifi?

If we go to India and want to only use wifi to call with skype or similar service, can we we turn of incoming/outgoing calls & texts, as well as data on our Verizon Samsung Galaxy s5?
If we can, please advise simple and complete directions to turn off calls, texts, and data services while roaming so we will not be charged for any services while still being able to use wifi, and how to reverse that when we return to the us.
Thank you.

kdm3170 wrote:
airplane mode will also disable wifi. go into settings, more networks, mobile networks and uncheck mobile data. the part of the phone that does calls and texts cant be shut off without shutting off…
airplane mode doesn't disable wi-fi

Turn off sms text sounds

How to turn off SMS text send and receive sounds

As far as I know, you can't turnoff the sound when sending text messages. But to turn off the sound for receving, do the following:
Click Settings -> Sounds -> Text Tone and choose None.
The alternative to no sound when sending text is to put the phone on vibrate.

HT4515 Does turning off group texting prevent my replies from going out to the mass?

I receive responses to group texts. How can i assure my responses do go to everyone else as well? Just turn off group texting?

Hi Auntie_Em4!
I have an article for you here that can hopefully help you understand group messaging a little further:
iOS: Understanding group messaging
http://support.apple.com/kb/HT5760
Specifically, I believe this section of that article answers your question:
If you send a message to multiple recipients without group messaging in use by the sender and all recipients, an individual message will go to each recipient using either SMS or MMS. Responses to these messages will be delivered only to the original sender in seperate messaging threads.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My airport turns off by itself and I have to restart the computer for it to work again and it only turns off again. I have Mac OS X version 10.6.8. What can I do to solve this problem?

My airport turns off by itself and I have to restart the computer for it to work again and it only turns off again. I have Mac OS X version 10.6.8. What can I do to solve this problem?

Usually the HDD is the frist place to look. Use the original install disk and start up the MBP with the C key down. Go through the installation process until you see on the display a menu bar on top.
Click on UTILITIES.
From the drop down menu select Disk Utility.
Open Disk Utility>First Aid and run Verify and Repair.
What are the results?
Also look at these articles:
https://discussions.apple.com/docs/DOC-3521
http://www.thesafemac.com/mpg/
Ciao.

After Effects & Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" (Win)

I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off the "Make text and other items larger or smaller" setting in Windows 7, since it causes some problems.
Please use this thread to let us know whether this solved a problem for you or whether there are any problems with this solution.

There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

Turn off information text after CIVS-IPC-2935 restart

Similar Messages

Maybe you are looking for