Turn off Infoupdate indicator in PO

Hi All..
I want to upload POs into SAP using a BDC. Inforecord update indicator is always checked.
Is there is any way to make the indicator unchecked?
I do not want to create inforecords automatically or I do not update existing inforecords. Can I put the condition EKPO-SPINF as blank in the BDC program? Please throw some light on this issue..
Thanks!

Hi
The default values for purchasing are defined at spro -> MM -> Purchasing - >Environment data -> Default values for Buyers.
There you define the default values under 2 digit code. In your case there are three default values 01, 02 and 03.
For an user the default code is to be assigned under user settings own data. System -> user profile -> own data and under parameters tab add a new parameter ID "EVO" and the code(01 or 02 or 03).
This is the place where the default values are linked to the PO and the user ID.
Hope it helps,
Regards,

Similar Messages

Turn off wifi indicator (orange light)

I recently got a Satellite E45-B4100 laptop. For the same, it is possible to permanent;y turn off the status indicator for the wifi located in front of the laptop? This is the orange light when the wifi is connected, and turns off in Airplane mode. I want to turn it off regardless of the status of the wifi. Any ideas? Can't find anything online till now. Cheers.

Hi
The default values for purchasing are defined at spro -> MM -> Purchasing - >Environment data -> Default values for Buyers.
There you define the default values under 2 digit code. In your case there are three default values 01, 02 and 03.
For an user the default code is to be assigned under user settings own data. System -> user profile -> own data and under parameters tab add a new parameter ID "EVO" and the code(01 or 02 or 03).
This is the place where the default values are linked to the PO and the user ID.
Hope it helps,
Regards,

Turn off GPS indicator in Maps??

I'm trying to look at my current location with Maps but the GPS signal is poor here so Maps is obscuring the image with a pulsing blue circle indicating it's trying to get a fix. Is there any way to disable that so I can just see the image? I know where I am, thank you.

Hi
The default values for purchasing are defined at spro -> MM -> Purchasing - >Environment data -> Default values for Buyers.
There you define the default values under 2 digit code. In your case there are three default values 01, 02 and 03.
For an user the default code is to be assigned under user settings own data. System -> user profile -> own data and under parameters tab add a new parameter ID "EVO" and the code(01 or 02 or 03).
This is the place where the default values are linked to the PO and the user ID.
Hope it helps,
Regards,

Lumia 521 battery indicator after a turn off

hi
i got a nokia lumia 521 a month ago , today i was with costumer support " t-mobile" and they asked me to turn of the phone pull the battery and take the sim card out , so i did , then they asked me to put everything back and turn it on so i did. but..... the phone didnt come up , by hitting / holding the power button , so i thought maybe my battery was very low when i turned it off , so i plugged my usb charger to the phone , now the phone does the following
when i plug the usb to the phone , the phone vibrates then goes to NOKIA then straight to the battery indicator with little red and a flashing on/off charging indicator , when i unplug the usb cable the phone turn off.
is there a trick to fix that ?
thanks

STEAMER123 wrote:
Found the problem(S)
Like people on the other website, the issue is the copper piece on the batteryis not contacting with the phone. That's why the battery icon shows only when its plugged in and nothing at all when its not plugged in. All the complaints I read on the internet has just one problem. It just happens I got two on this phone.........
1) I had to use a tiny needle to bend the copper piece out to ensure its making contact with the phone
2) after I bent the copper piece, the battery is still not contacting right, (you can't really tell by looking at it, I was just trying everything people were saying on the web. I spent hours on it and I got it !!!) I had to cut a business card to slide it underneath the battery. (2 business card thick). If u have same problem, u should try one card thick first.
Now the back cover feels like its swelling cuz of the business cards, but comparing to a $600+ phone, this $99 phone I can do everything I need it to, I can deal with that. Just wish I could have found the problem(s) sooner.
Hope this will help people with the same problem
Hey, this really helps, after looking for arkane solutions, I just add a piece of bend paper under the batery and it works... notice something,, the batery used to hace a plastic strip por pulling out.. this plastic strip got unglued so i removed, i see this plastic strip thinkness is needed for the wire copper piece to make contact... terrible design.
thanks for the advice.

How can I turn off the green light indicator on my AirPort Express?

How can I turn off the green light indicator on my AirPort Express? It really annoys me.

The Zed,
You have two options and you probably won't like any of them.
Using the Airport Utility, click on the AE then "Base Station", then "Options". That will bring up two options for you AE green light, either keep it green at all times or only light up when it is being used.
The second option is put some tape over it.
Hope this helps.

Turning off the sleep indicator in the display release latch.

Can I turn off the sleep indicator in the display release latch even though it is still sleeping?
(At night time my bedroom looks like its being invaded by Aliens)
TIA.
12.PB. (Rev A). & MBP Mac OS X (10.4.8)
12.PB. (Rev A). & MBP Mac OS X (10.4.6)

...duct tape?
Apple released an update a while back to control the brightness of the sleep indicator, but it was only for certain G5 models. Quick perusal of apple support didn't turn up anything. Coworker swears that the brightness is controlled by the ambient light sensor, but I certainly can't tell the difference in a bright vs dark room...

Battery percentage indicator doesn't turn off

Hello i have an iphone 4s with the latest upgrade (7.1.2) and i discovered that it simply doesn't turn off the battery indicator level, even disabling it at general settings at all.
I have recently received an new iphone from apple care and when i get my hands to it, in "new iphone" mode, it comes disabled by default.
But when i dit the restore backup via itunes this thing doesnt turn off.
Sorry bad english, im brazilian.
Thank you

Hey Rafacandido,
Thanks for the question. Let’s see if we can isolate the issue further. To do so, try restarting/resetting your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a restart, let's try a reset of your settings as outlined below:
Reset iPhone settings - iPhone
http://help.apple.com/iphone/7/#/iph7a2a9399b
Reset iPhone settings. Go to Settings > General > Reset, then choose an option:
Reset All Settings: All your preferences and settings are reset.
And finally, if the issue persists you can try a back up and restore as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

Config to Turn Off Indicator for Billing Plan in Header

Hi,
anyone knows whether there is a config that is able to turn off (or default as blank) for the indicator for "billing plan in header" that is found in the item's billing plan? This is the indicator that cause the item billing plan dates to copy from header's billing plan.
I am trying to write a program that create sales order with billing plan using BAPI_SALESORDER_CREATEFROMDAT2. As this BAPI does not allow me to change the item billing plan dates, I am looking at using the stardard program SDFPLA02 after the BAPI is called. However, for the program to work, I need this "Billing Plan in Header" un-tick,
Or, is BAPI_SALESORDER_CREATEFROMDAT2 able to un-tick this indicator?
Regards,
Norman

Hi,
In SPRO> Sales and Distribution> Billing> Billing Plan> Assign Billing Plan type to Sales Document type.
Remove the assignment.
Hope this helps.
Regards,
Sharan
Edited by: SharanKumar.S on Oct 3, 2011 11:25 AM

Clipping indicator wont turn off

Okay, so I recently updated to ACR 6.7.
Since then everytime I open an image there are clipping indicators that won't turn off.
I know about the usual highlight and shadow indicators (pressing "o" and "u" respectively) and when i turn these on the other stuff disappears but if I turn these off then I get what I can only describe as less dramatic clipping indicators i.e. they are not just red but varying shades of purple and green.
Any ideas what these are? Will try post some screenshots if needed.

Had the opportunity to delve into the highlight clipping issue, and found another interesting anomoly. With ACR set to 100% to eliminate any display issues you can see in the first image the highlight clipping indicator with all the controls set to zero; which is what I would expect to see, and the highlights while hot, not too hot and moving the highlight control to the left as seen in the second image, the highligh clipping indicator is off with the highlight control set at -45 again with all the other controls set to zero
The second image shows no highlight clipping...
Now still reducing the highlight contol to -85 with all the other controls set to zero; and guess what? The highlight clipping indicator turned back on, not expected behavior.
So while we have an anomoly with the indicator, do we also have a problem with the highlight control itself?
I checked with the color picker and the highlight values with the control set at -45 showed R=254 G=254 B=254 not quite pure white, but still a blown highlight, but with the control set at -85 the RGB values increased to R=255 G=255 and B=255 which is pure white. At -45 there were some values lower than 254 but those increased to pure white wheras I would have thought they would have reduced in value as you further move the highlight control to the left
Not sure if this will help Eric and team, but a few more datapoints.....
Mike

Message Indicator Options - Can I turn off missed calls indicator, but keep indicator for

Can I turn off missed calls indicator, but keep indicator for other messages? i.e. voicemails etc.

Yes you can.
Press the green dial key to enter the call log > Menu key > Options > Call Logging and set the logging to NONE and save.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Turning off new message indicator AND the new message count

Greetings,
Is it possible to turn off both the new message indicator (red asterix) and the new message count?
I would like no message indicators to appear on my blackberry home screen.
Thanks ever so much for your help.

I guess I didn't read close enough. I don't think you can turn off the red asterisk. It's going to show up on the icon no matter what.
As for the text messages, I'm not sure the setting for not showing message count indicator applies for text messges. In fact, if you have OS 5, it most likely doesn't as sms is handled much differently.
You can turn off sounds and the red led in Profiles (or Sounds in OS 5)
You're basically wanting to disabl everything the phone was designed to do.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Ipod turns off while battery indicator is full.

Hi a couple of days ago my ipod turned off about 2 mins after i turned it on and said that i had a low battery, however the battery indicator was fully charged. Then after 10-15 mins i tried it again and it worked fine, can anybody tell me why this happened, and if anybody else is having the same problem?

The iPod battery indicator is only a very loose approximation of how much charge there actually is left and is not that reliable.
These may help.
Beef up my iPod battery.
How to accurately determine your iPod battery life.
Can I make the meter more accurate?

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

My BEATS speakers are connected to my Mac but I have no audio and do not understand how to turn off the speaker. I press the power button and not shut off. And the white light behind me indicating that this synchronized, does not turn off ever.

Hello Sabroso007
Check out the article below to troubleshoot the sound output to your Bluetooth speaker. Check in System Preferences > Sound to see what the output is set to.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Regards,
-Norm G.

[L530] Battery LED indicator turns off when plugged in

Hello. When I plug in power supply, the back battery LED indicator turns off, so after closing lid (leaving power on) I have no information whether the PC is on or off (the only back indicators are battery and sleep). Is there any possibility to change the bahavior of this LED?

ALSO, the fans are really loud when the power adapter is unplugged. Not grinding or anything, just like it is working double as hard. I unplugged it, held down the power button for 10 seconds, and it restarted ok. Caps lock light works and now i'm going to plug the power adapter in...screen goes black, illuminated keys turn off, but the backlight is still on. Plugged in, it is completely unresponsive.

Battery Indicator - won't turn off!!!

Basically, my iPod won't/can't turn off. The little battery in the top right always has a little lightening bolt or plug in it, no matter if the iPod is plugged in or not. The obvious effect is that the battery runs down when I'm not "using" my iPod. I've restored, reset, updated, installed 1.1, uninstalled 1.1 and reinstalled 1.0, etc. I haven't seen anything about this on the site or elsewhere. I'm hoping there's a solution where I don't have to sent my iPod away but it's appearing less and less likely...Please help!

Anyone know anything about this?
Several people have had this problem in the last few days. I don't recall any of those cases being solved.
Nevertheless, try a reset, which is the equivalent of a reboot and won't affect your data. I don't think it'll work, but you lose nothing and it's non-risky.
Reset your iPod.
1) Slide the lock button to ON.
2) Slide the lock button to OFF.
3) Press 'menu' and 'centre' button together for several seconds.
4) Follow the instructions.

Turn off Infoupdate indicator in PO

Similar Messages

Maybe you are looking for