Turn off "internet connection" on 3G

Hello,
I use a pre-paid plan on my iPhone 3G, and it's often that a friend click on something (or a app tries to connect) that requires a connection and takes most of the credit on my plan.
I only use the internet using the free wi-fi hotspots available in my area and not much often. So I turn it off to save battery, however when I turn if off it starts using GPRS using my paid credits.
So I would like to block the access, any idea?
Thank you all in advance.

You're welcome.
SMS messages are transferred via the same avenue as calls.
Blocking data access at the source for your account will prevent ANY internet functions with your iPhone unless you are connected via wi-fi. This will also eliminate the visual voicemail feature with the iPhone. All visual voicemail messages are downloaded to the iPhone via the cellular network only.
Your cellular provider can block data access or internet access via their cellular network for your account, which is the only way to prevent any data access over the cellular network with the iPhone.
As long as you have cellular reception, the iPhone is designed to have an internet connection - via wi-fi or cellular, with the iPhone switching from an available wi-fi network that you have access to the cellular network automatically and seamlessly and back again.

Similar Messages

  • Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection

    Is there anyway i can put a stop to emails between a set period of time say 10pm - 6am without turning off internet connection.

    The only ways in iOS would be to stop using push mail or timed fetch mail and switch the account(s) to manual fetch.  That way, you only get mail when you open the mail app. to use it.
    Or, you could selectively disable wifi and cellular data - voice calls and SMS texts would still come through then.
    Other than that, I cannot think of a way to selectively disable email by itself.

  • Is it possible to turn off "Internet Connect / Authentication Failed" msgs

    Greetings and thank you for your time.
    My network connect is set up to automatically connect wirelessly or through Ethernet...this is fine.
    However, every time I open my notebook or start it up,
    If my computer cannot connect through those two, (airport is off/no cable attached) it constantly sends the pop-up message: "Internet Connect / Authentication Failed". 3 times over a period of 15min.
    Is there any way to turn this warning off ?
    I am not trying to access a connection & Mail/Safari are closed.
    It makes it frustrating when you arrive at a meeting to start a presentation and you keep getting this popup that blocks all functions till you acknowledge it and click "ok".
    Any suggestions other then turning off auto connect (which I appreciate when I do turn on Airport or plug in an ethernet cable.
    Thank you for any support on this.
    Best regards, T

    Greetings T, and Welcome to the Discussions!
    We just have to find what it is that's tying to connect/call home, and disable it.
    Common examples are Network Time... Set Date & Time Automatically.
    Software Update... Check for Updates...
    Dashboard Widgits & Rss Feeds.
    Automount Shares.
    Mail automatically checking for Mail.
    I( was thinking more when I started, but the Berr is...
    If all that fails, maybe get Little Snitch, it tells you when a program tries to send info to the internet so you can see what's going on in the background!
    http://www.obdev.at/products/littlesnitch/index.html

  • Virus Software Turned Off & Internet Connection Problem

    My laptop has been slowing down, but it was fine otherwise.   A few days ago, I turned it on and received warning messages from the HP Action Center and HP Support Center that my Kaspersky Anti-Virus and Anti-Spyware software was no longer on.  I never turned them off and they've been working fine for 6 months or so, so it's not like I just installed them recently.  Since the problem started, I've tried several times to turn them back on, but the computer just doesn't do anything.  It asks if I trust Kaspersky and want to run the app, I click on yes, and then nothing happens.  I've also tried to run the software by using the Kaspersky desktop icon, but that won't do anything either.   The same time that this problem occurred, I also lost my ability to fully connect to the internet (DSL connection).  I can get to the Firefox homepage, but whenever I try to get to any other website, even simple ones like Google, nothing happens.  I've tried everything I can think of to fix these problems (except for using the refresh/restore option, which I'd like to avoid if possible).  I've power-cycled the modem, run diagnostics and network checks, and I installed MalwareBytes from a USB drive and ran that scan, but it didn't find any problems.  At the same time that these other problems began, I did see a brief notice that said that a Windows update failed, but I don't know if that caused these other issues or if it just failed because the other issues prevented the update.  Kaspersky's tech support has not been very helpful.  Does anyone have any suggestions?  Keep in mind that I can't access the internet from the affected computer, so I can't download anything directly to it.  Thanks in advance for your help.

    Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I came across your post about the multiple issues that you are having, and wanted to assist you! Have you tried to uninstall and reinstall your Anti-Virus and Spyware program?  You can try performing a System Recovery.  If that does not work, you may also consider a Hard Reset.  Do you have a wired, or wireless internet connection?  What type of internet browser are you using?  Here are some additional resources that may help you with the internet connection:HP PCs - Troubleshooting Wired Home Networks (Windows 8)HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)HP PCs - Resolving issues in Internet Explorer (Windows 8) Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great day!

  • Turning off Internet Connect automatic prompt

    I have a Verizon Broadband Express wireless card for internet connections. I constantly have to turn off the prompt to start Internet Connect function. To try and stop this, I have gone to preferences and turned off the "Start internet connection when needed" function. It is annoying and distracting while giving a presentation.
    PLEASE TELL ME how to get rid of this painful interruption.

    FYI - this is the Internet and Networking discussions area for the iPhone only.

  • Can't turn off internet sharing

    My brand new MacBook Pro has been working perfectly--until out of the blue internet sharing turns on everytime I boot up. I have never used internet sharing and certainly don't want to now, because I can't use my wireless network with it on.
    My internet connection has been working flawlessly and I made no changes whatsoever (it simply was on once after booting up, and now is on forever), but I CAN'T turn off internet sharing. In my internet sharing preference panel it says that internet sharing is already off, but my airport menu bar says it is on. This is becoming most irritating. Any suggestions?
    MacBook Pro   Mac OS X (10.4.8)   2 day old computer

    Are you sure this is not just a neighbour's wireless network?

  • New Intel WIFI Link Driver Randomly cut off Internet Connection

    Two day ago I used ThinkVantage SYstem Update and installed Intel Wifi link driver (ver 13.01.1000). But since then my computer was randomly cut off internet connection, and the wireless signal strength icon on the system tray indicated no nearby wireless network. And then it powered off the wireless connection. Whatever I do, I cannot re-power on the wireless (I used Access Connection to power on the 802.11 wireless radio, but it could not be turned on and nothing happened) unless I restart the computer. 
    I thought it might be the router that malfunctioned as this problem never happened before. But after I checked the router and used another notebook to test wireless connection, I was sure the router ran very well.
    Then I re-installed the TVT Access Connection (ver 5.61) and the Intel WIFI Link Driver (ver 13.01.1000) but the problem remained. Could anybody give a possible solution? 
    I also noticed on Lenovo's website, the Intel wireless card driver for T61 is v13.00.0000 Windows Vista 23 Oct 2009. It's lower than what I have now. Could that be the cause?
    My ThinkPad T61 has the following configuration:
    Model: T61 8897CTO
    OS: WinVista Home Basic SP2 32bit
    Language: EN
    Wireless Card: Intel 3945 ABG
    Wireless Card Driver: 13.1.1.1 (previous one was 13.0.0.0)
    TVT Access Connection: 5.61
    Solved!
    Go to Solution.

    Hi carlven,
    Anytime when wireless driver is updated, Access Connections also needs to be reistalled.
    Do this, first uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
    When installing any lenovo driver manually, keep in mind they first extract themselves to a default location in C:\Drivers..., second .exe setup must be run from that location to successfully install the drivers.
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Turn Off Internet

    I am looking for an app or even settings that will turn off Internet access except via Wi-Fi .
    Finding even if i am connected via Wi-Fi some applications ask for Internet access and saying Yes presuming they are going to use the Wi Fi connection  they then proceed to connect via  network providers internet charged connection . 
    Simple Internet via Network OFF .
    Network Internet connection required then i have to actually switch it on .
      jjegan

    There probably is not. +Settings > General > Network > Enable 3G > Off+ will just turn off 3G - meaning the phone will use EDGE or GPRS instead of the faster network, but it will still use data. Not sure that you can delete the Cellular Data Network settings, either, as those are not accessible on a locked phone like mine. call your carrier and have them deactivate your data plan. But that defeats one of the main reasons for having an iPhone, IMO.

  • How do I turn off internet recovery in Mountain Lion?

    I need to turn off internet recovery in Mountain Lion. The reason is if you use internet recovery you can access safari and although parental controls are on, internet is unmonitored. I want to ensure my MBP is secure from the darker parts of the internet and thus I don't want there to be any unmonitored internet access.
    Is there a way to turn off internet recovery or is it hardwired into Mounatin Lion?
    Seb

    Open firmware password may be the way to do it.   Mind you, a clever enough person can bypass that, but it takes more effort than it usually is worth.  Put a hidden camera in the room if you are worried something will happen, and backup the data only when you are present.  And if you forget the open firmware password, you may have locked yourself out for good anyway.

  • Turn off Spotify Connect

    How do I disable Spotify Connect?  
    If I've got my tablet (iPad) running the app, I definitely don't want my phone running it and draining the battery with the app running there as well.
    Thanks
    Edit by  
    I've just added a guide on ways of disabling Spotify Connect. Hopefully there will be a way of enabling/disabling the service at will in the future.
    How to disable Spotify Connect
    MODERATOR EDIT:
    Hey everyone, Spotify staff here. Recently we updated the Community Idea "Make Spotify Connect a choice" with the status "Not Right Now".
    If you've installed our latest Spotify app for Android (1.8.0) and you're still having trouble with battery drain please let us know right here. 
    We'd also like to mention these other Connect ideas which are a bit more specific to the Connectrequests you've made in this thread. Please leave your kudos and feedback in those as well if they apply to the reasons you'd like to turn off Spotify Connect.
    [Spotify Connect] Less pop-ups when I change devices
    [Spotify Connect] Don’t automatically synchronize what i am playing across devices
    [Spotify Connect] Add access control on my Connect devices
    If you don't see the idea you'd like to see, please feel free to make a new idea and post a link in this thread. We're keeping a close eye on your feedback and we're actively bringing it back to the right teams. 

    Hi... I have a problem with this as well - I find it incredibly annoying. For example, I was out picking up a pizza and listening to spotify in my car... When I got home my girlfriend began listening to Spotify on her cell phone - and my cell phone began playing music from it because my device was the last selected. If at all possible, I'd like there to be a feature to turn this option OFF entirely. I can't see it being logical to have this on by default. I enjoyed the option that stopped my device from playing completely when someone else was using the same account from another machine, hopefully you can bring this back because it totally makes more sense than the way it is now.
    I don't like the ability with anyone who has access to the account to be able to play music on any device that has the app open as well. This can be quite embarrassing if someone accidentally clicks on your device, say, as you go into a meeting with your phone in your pocket and it begins playing "It's raining men" or something... I hope you can understand my sentiment! Again this can be fixed if you just gave us an option to turn this off entirely for any (or all) device(s).

  • Mail turn off SSL connection isn't possiple

    Hello,
    I update from 10.7.4 to 10.8 here and I have a big problem in Mail now:
    I use a private IMAP server without SSL connection.
    In Mail from 10.7.4 works this fine, but in 10.8 Mail would like a server certificate and an can't turn off SSL connection for the smtp server.
    What's the problem?
    Anybody can help me?
    Sorry for my bad english :-)
    Greetings, Bernd

    I found a kludge:
    Go in SMTP server setup -> Advanced and enable the option use costum port and fill out a port number (exp. 25).
    Mail don't ask to an certificate anymore.
    I hope, Apple remedy this problem in an 10.8 update.
    Greetings,
    Bernd

  • I turned off Internet access, using airport timed access control.  Now, I can't turn it back on.  The base station can't be found.  Please help.

    I turned off Internet access, using airport timed access control.  Now, I can't turn it back on.  The base station can't be found.  Please help.

    Can you take a look at this one and offer your opinion please?
    https://discussions.apple.com/message/21889032#21889032

  • My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

    my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?

    My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?

    I've got the same problem.
    I wanted to download the new itunes version for iphone but it got stuck. I had no choice but disconnecting my iphone. Then I couldn't sync it anymore.
    I switched off my phone by holding down the sleep button but it has never successfully switched off. The round thing still turns.
    I've tried to connect it back to the itunes. This is the error message I get: itunes can't connect to the iphone. Code 0xE8000065. I tried to find out what error message this is but the apple support site I saw didn't mention this error code.
    Can anyone help? Thaaanks!

  • How do I turn off Internet Tethering?

    Often when I am connected to free WiFi, I find my iPhone-4 going through the motions of Internet Tethering - which appears to curtail all other use of the WiFi.
    I went to the Apple or AT&T sites for help - they show an instructions screen where the "Internet Tethering" "button" in the Setting/Genenal/Network screen has an On/Off switch. Mine does not - it simply shows either "Set Up Internet Tethering" or "Internet Tethering".
    I don't need internet tethering - how do I stop my iPhone-4 from trying to do it and in doing so curtailing my wifi access?
    Thanks
    roritchie

    hey
    try this, it might work for your
    it worked for me !!!!!!
    i had the same problem with my iphone replacement 3GS with 4.0.2 iOS
    i took it home, activated and let it charged until full.
    then i unplug it and 7 hours later i checked it, it was 55% battery life left
    i didnt do anything with it, no even call or surf on the net
    it doesnt even have the sim card on (only stanby)
    so looking at the setting
    i saw the internet tethering spinning and spinning never stop
    i didnt want to restore it as it has 4.0.2, dont want 4.1 yet
    so i put my sim card
    turned the 3G setting off
    turned the celullar data off
    internet tethering still spinning
    then i turned the 3G setting on (internet tethering still spinning)
    turned on the cellular data on (internet tethering still spinning)
    turned on the data roaming on ( voila!!! internet tethering OFF )
    then turned data roaming off and cellular data off
    and internet tethering still off
    let me know if works for you
    i will compare the battery life if this was affecting or maybe something else

Maybe you are looking for

  • Wont boot from restore dvd's or new copy of Leopard!!

    Well I am witts end I have an isight that I installed a new hard drive on and will not boot from the restore dvd's, or a new leopard disc(now i am out 130). It will how ever boot from drive genuis(new drive is fine) or restore dvd's from a new iMac a

  • My cell not showing some application

    Sir i am using nokia lumia 720 ,yesterday i was update " amber update" on that time i realized my phone is repeat music song automatically than i reset my phone . Now my amber update features missing into my cell phone like glance etc .please help me

  • TS3297 I can't remember the answers to the security questions.  Where do I find them?

    I can't remember the answers to the security questions?  Where do I find the answers?

  • Pre-composed layers not consistantly casting shadows?

    So. I've been trowling through th interwebs for an answer and it appears a lot of people have come accross similar issues yet I am still to solve my little hiccup. I have a bunch of 3D layers sitting on a 3D plane. Everything was going swimmingly unt

  • CS4 demo interferring with CS2

    I am currently running CS2.  I tried the CS4 demo, but found that my laptop was not powerful enough to process the 3d images.  I deleted CS4 and would like to continue with CS2.  CS2 runs fine now but I have a problem that if I right click a photo an