Turn off Macbook Display

Sirs,
I've connected my Macbook to my TV and can successfully use Frontrow to watch DVD's. Is there a way to turn off the Macbook display while I'm using it with the television?
Thank you.

You can close the lid. The remote should "wake" the MacBook when it's connected to a TV (or other display).
-Doug

Similar Messages

How to turn off macbook pro15" screen display ?

Hi. how to turn off screen display on my macbook pro15" ?
[email protected]

Maybe this will help +Use a MacBook with the main display off+:
http://hints.macworld.com/article.php?story=20060607121656766

My Macbook Pro (early 2011, 10.6.8) keeps rebooting when I put it to sleep mode or turn off the display.

When I go out for lunch, I always put my Macbook Pro either to sleep or turn off the display with Ctrl-Shift-Eject. Recently, a few times, when I returned to the computer, I find it in the login screen with all apps closed. What to do?

What do you man by 'kills' the application? Do open applications close?
Try SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Then try a safe boot:
http://support.apple.com/en-us/HT201262
Any change?
Do you have any third party AV or so called 'performance' or 'cleaning' applications installed?
Ciao.

Turning off Macbook Air Display when using External Display on Lion

I had been searching the web and the community forums here for a few hours and finally figured out how to turn off the display on my Macbook Air 2011 running lion and using an external monitor.
With Snow Leopard all you had to do was plug in the external monitor to your MBA then close the lid and wake up the MBA while it was closed. Then you could open up the lid and it would stay off so it would have better air flow and wouldn't get too hot and run the fan all the time.
But ever since Lion, they screwed that up for us.
But after all my searching I finally found someone here give the fix on a MBA.
All you need to do is use a little magnet and put it where the MBA
Special thanks to ronaldfromjakarta and wv636 for giving the answers and workaround until Apple fixes this oversight
"I found a solution for this.. my solution is to put a fridge magnet directly right to the return key (about 2 cm away from the right usb port)... so the laptop thinks the lid is closed and so the display is off.. lol.. try it.. it works.."
You can read more about others using this here: https://discussions.apple.com/thread/3192733?start=0&tstart=0
In this example I used a big yellow magnet just to test it out, but I will be using a small thin magnet for regular use so that it wont mess up my screen if I accidentally close the lid on it.
Also I put a small piece of paper between the magnet and my MBA so that I wont scratch my MBA.
Some will also ask if it is safe to use a magnet on your MBA etc. You are only placing a magnet where the magnet from the lid would go anyway's. Just make sure you don't use a super magnet or something and you should be all good ;-)
Here are the image examples:
MBA is powered on
MBA is now asleep
Just place the magnet right next to the "Enter/ Return" key
(Note: I used a small piece of paper under the magnet to protect from scratching my MBA)

I also made a video

When sharing screen from work with my home computer, is there any way to turn off the display at home?

Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It seems a bit of a waste of power to have the screen on when I'm not actually there - I just need to be able to see all my programs etc on the remote screen in order to use them. My home computer is a 2011 iMac running latest Mountain Lion, work is a 2010 MacBook Pro.
Thanks in advance!
Matt

I've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
Matt

My MBP doesn't go to sleep, only turns off the display

So I recently upgraded to 10.9.2 from 10.6.8. I have MacBook Pro mid 2010. I used to use InsomniaX to disable sleep when my lid was closed. It worked great, I could disable it anytime. Now after upgrading OS X I had to upgrade to newest InsomniaX so it worked. It use to work good, but when I wanted to disable it and have my MBP go to sleep I sometimes had issues.
Decided to uninstall it completely and try other apps - I installed NoSleep, but noticed that when I disable it then it won't go fully sleep.
Instead it just turns off the display and keyboard backlights, I hear my fans going.
I tried to uninstall everything completely - from any traces of InsomniaX, and as well NoSleep. I did try to reset SMC and PRAM. Now when I close the lid or go to apple menu and chose Sleep - I still can hear the fans going, the display is off, the light on the right side of the MacBook case is turned on (instead of flashing, like it used to when it slept) - dimmed when I Sleep via Apple menu, bright when I close the lid.
What can I do to somehow revert to the default setting so my MBP can go to sleep?

OK I solved it.
I followed instructions from http://superuser.com/questions/214943/what-is-preventing-my-macbook-from-sleepin g/409481/
Go to Utilities in the Applications folder and open the "Terminal" app.
Type pmset -g and hit Enter
If "sleep" has 0 next to it and the words "imposed by" or "prevented by ; The number next to the imposed by is the process ID causing the problem. Copy that number.
Type ps -e | grep <process ID here> and hit Enter. This will list all running processes that have that ID (will also include the grep process)
For me it turned out to be Internet Sharing enabled that prevented my MBP from sleeping.

How can i turn off my display?

Hi everyone, so, i`m using my MacBook Pro with one Samsung T220 Display, and i want to turn off the display of the MacBook when i get out, like i make with the samsung, only click até thw power button, and that`s it, turn off. How can i do the same thing with the MacBook Display and turn off the display when i want and don`t using the screensavers? Thanks a lot, sorry for my english, i`m learning.

You can either turn the brightness on the internal display all the way down, or close the display and use the MBP in clamshell mode (with an external keyboard/mouse):
http://support.apple.com/kb/HT3131

Turn off the display but prevent sleep

Hello,
I am new to the Mac OS system and am facing a difficulty.
I want to keep my macbook running through the night downloading the updates, however I want the display to be off. For this I have used apps like caffeine and no sleep and have also modified the system preferences. But still whenever I turn off my display, after some time the macbook goes to sleep and all my downloads and updates are paused.
Is there any workaround which allows me to turn off the display without letting the mac to go to sleep ??

Have you tried the energy saving setting that controls the hard drive sleep, and set it to Never?
Then it won't matter the minutes display is set to wait until sleep, so long as it's not also never.
If there is a problem with this not working, you may check into an SMC reset; or perhaps also
the NVRAM/PRAM, as one or both may be in control over some aspect of this (dys)function.
•Intel-based Macs: Resetting the System Management Controller (SMC)
•About NVRAM and PRAM
There may be other issues with the later versions Mavericks energy saver selections; in the
older systems the matter was refined and less a problem. Your mileage may vary.
Good luck & happy computing!
edited 2x

Windows 8 "Turn off the display" setting not working

Hi all, I've got a TP W520 which I upgraded to Windows 8 with all updated Lenovo packages including the power mgt driver, Lenovo settings dependency package, and the newly installed Lenovo settings metro app. I'm seeing the following problem when trying to set a time for the monitor to shut off under Control Panel -> Hardware and sound -> Power Options -> Edit plan settings: - If I set any time other than never for "Turn off the display" such as 1 hour for example, the monitor will get turned off as soon as the screen-saver launches from the Windows 8 Lock Screen. - I'm not seeing this same behavior if I let the screen-saver launch while sitting at the desktop screen, problem is only seen from the Windows 8 lock screen. You can test this as follows: - Set "Turn off display" to any time i.e. 30 min - Change your screen-saver to launch after 1 min to test this - Type ctrl-alt-del then click lock to enter the lock screen, then let the screen-saver activate after a minute. - Once the screen saver tries to start, in my case, I see the monitor getting turned off and the screen saver doesn't even start. The monitor shouldn't get turned off until 30 min elapses. I'm suspecting some kind of bug with this which is still outstanding and I look forward to feedback from others on this issue. Thanks, John

Hello @duleNS
To get your issue more exposure I would suggest posting it in the commercial forums since the HP EliteBook 8770w Mobile Workstation is a commercial product. You can do this here Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 8770w Mobile Workstation.
I hope this helps!
Thank you for posting on the HP Forums.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Creative Zen 4gb, is it supposed to turn off the display to save the batte

I just bought a Creative Zen 4gb, is it supposed to turn off the display when I'm listening to songs?to save the battery?
Mine doesn't. It just goes dim.

Yes, it is possible. On the right hand side of the player is the slider to turn on the player, push the slider upwards to the lock position and the screen will turn off. That is the Hold mode. At this mode, all the buttons would be inaccessible to prevent accidental pressing of the buttons. This is the mode to use when you are just playing music and do not need the display.
To unhold the player, just push the slider to the middle position and all the way down to turn it off.

Cant edit powersetting for laptop to turn off the display after .. when power is plugged in

I tried to set the setting on a laptop in our domain from "turn off the display after 5 minutes" to "never".
the button is greyed out.
I tried the advanced settings, even that won't work.
Os on the laptop is windows 8.1 Pro, the laptop is a member in a domain.
Anyone knows this issue?
thanks,

Hi，
Are you referring to this?
Please check the policy Computer Configuration\Administrative Templates\System\Power Management\Video and Display Settings
(if deployed by a GPO created by server in a domain, then check Computer Configuration\Policies\Administrative Templates\System\Power Management\Video and Display Settings)
in the right pane, find "Turn off the display (Plugged in)", check whether it is configured to a specific data.
Yolanda Zhu
TechNet Community Support

Should iphone 4 receive messages when turned off and display them when switched back on

should iphone 4 receive messages when turned off and display them when switched back on

It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
So generally speaking, a few minutes after you turn your iPhone on, your messages should display. Similarly, your voicemails would arrive.

HT4623 How to turn-off tap display during passcode entry

I recently bought Iphone 4s. I like the phone as such but one thing that I want to change is tap display while entering the passcode on lock screen. I don't want to see which keys I am entering as this can put my phone on risk as anyone close to me can see what keys I had pressed to unlock the phone.
Please help to let me know "How to turn-off tap display during passcode entry" on locked screen.
Thanks for the answers and suggestion.

This cannot be done. You should simply hide the display from others' view.
iPhone 5S allows you to use your fingerprint instead of the passcode.

Can I turn off my display while syncing?

I have an old laptop with usb 1.1 ports. Obviously syncing is extremely slow. If I want to load 12 GB worth of songs it can take hours. Does it harm or wear out the display or do I risk burning the image of the 'Sync in Progress' screen onto my display permanently if it takes eight hours to load that much data? Is there any way to turn off the display while syncing? Thanks

No, you cannot turn it off.

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the

Hi, I'm trying to shut down the phone in the normal way (the Sleep / Wake button and hold down on the Close tab) turns off the display after a while yet, but the phone turns off completely opens up the phone to come out after the apple logo .. What is the reason I'd appreciate if you help how to fix it ...pleasa help me

Doing those doesn't turn off your phone?
As stated hold down the top button only until you see the red slider to power off your phone.
If that doesn't work then take it to Apple and see what they say.

Turn off Macbook Display

Similar Messages

Maybe you are looking for