Turn off Optical Audio out?

somehow my headphone jack is now set to optical audio out. I want to get it back to outputting audio to the internal speakers. how do I switch the jack back to non-optical output?

Your problem is due to a defective switch integral to the audio out jack.
Sometimes it can be remedied by inserting and removing an audio plug a few times. Other people have had success by fishing a toothpick around in the audio jack to free up the stuck switch.

Similar Messages

HT1338 how do I turn off optical digital-out port?

how do I turn off optical digital-out port?

Just want to report that I too, running 10.6.5 on a MacBook Pro, had the mysterious " Audio Out Stuck On Optical Digital-Out Port" problem whereby I was unable to adjust the volume on my built-in speakers and they were permanently "muted" because the operating system was sending the audio signal to a non-existent device that it falsely thought was plugged in to my unused headphone jack hole. I thought at first the problem must necessarily be software-based because the built-in speakers worked fine when playing the start-up chimes. So I uninstalled something called "Soundflower" which does some mysterious shenanigans with commandeering the internal audio signal so that one can make audio recordings of one's computers' sound effects. But uninstalling Soundflower had no effect. So I uninstalled some other audio-related software, also to no avail. Then I zapped the PRAM, to no avail.
Then I decided to try what some people call "the toothpick trick," i.e. poking around in the headphone jack hole to see if something was stuck in there shortcircuiting it, and initiating the false signal to the OS.
Bingo! Success!
Actually, I did a hyper-sophisticated version of the toothpick trick:
First, I own a home "otoscope," one of those doohickeys that doctors use to look into your ear. One can now buy amateur versions of otoscopes for home use, to looks for kids' ear infections, etc. (They only cost $30 or so.) Anyway, using the smallest attachment designed for babies' ears, I was able to look (with illumination) into the headphone jack hole and yessiree there was a big bunch of dust stuck way deep in there.
So then I took not a toothpick but instead a slender dental prong-pick thingie made of stainless steel, and very delicately was able to snag the clot of dust deep in the hole at the bottom on the first try. Quite a wad!
Then I took one of those rubber ear-bulbs, used for cleaning out your ears, and used it as a micro-vacuum-cleaner: Squeeze the rubber bulb til it is as empty as can be, then place the tip of the bulb at the entrance to the headphone jack hole, then suddenly release my grip: it ***** air out of the tiniest spaces! After doing this a few times, I then did the reverse and blew blasts of air into the hole.
After all this, I looked back into the hole with the otoscope, and it was sparkling clean! Not even the tiniest speck of dust in an area that just three minutes earlier was thick with dust.
I then turned my computer back on and...problem solved! The audio worked again like normal, and it was no longer detecting an imaginary "Optical Digital-Out Port" device. The internal speakers once again worked as normal, and the volume could be adjusted.
I guess the problem for me really was dust causing a short-circuit. It might very well be the same for you -- so try cleaning out the headphone jack hole as I did.
I'm writing this detailed description to help anyone else in the future with a similar problem.

Optical audio out turns off during silence

My optical audio out port turns off when no sound is being played. When a sound is played my speakers pop as the receiver switches into optical mode. This takes a second so I miss system sounds. I would like to set the optical out to always stay on, even when I'm not listening to music so I can hear these sounds and avoid popping. Does anyone know how to accomplish this?

Note that there are several different ways that an iPod or Nano can support TV output, depending on the iPod model & type of connection. The charts at iPod and iPhone: TV out support may be of some help with this, but it still can be confusing, depending on which of the two Apple docks with very similar names you might have used, or if you used any third party connection products.
Because of this, it probably would be best for each of you asking for a solution to describe in detail which items you used in your connections, & which of the TV's video input jacks that you plugged the output connectors into.

Where is the setting to turn off descriptive audio

I cannot find a way to turn off descriptive audio overlay in QT player, so there are two slightly out of sync soundtracks with a descriptive audio track.
What is the solution?

This isn't built in but if you Google something like
"iphone settings shortcuts without jailbreak" you'll find various ways to set these shortcuts up. It's not exactly "official" but it does not involve doing that "escaping from legal custody" thing which we cannot mention here

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

Optical audio out to receiver

Hello, I have a powermac g5 hooked up to a vsx-1014tx Pioneer receiver via digital optical audio. When I'm using dvd player and select "system sound output" in Dvd Player's preferences I get audio through the digital optical hookup and sound out of the speakers, but the receiver's display doesn't switch to DIGITAL (it displays whatever sound processor I select on the receiver such as dolby prologic II) i.e. the computer outputs 2 channel digital audio. When I switch to "digital out - built in audio" in Dvd Player's preferences, there is no sound output while watching a movie. The receiver flickers between DIGITAL and DD Prologic II. Is there anything that you know of that will allow me to get 5.1 Dolby Digital put out through the G5's optical audio out? (settings, audio codec, ect.)
P.S. I have software updated and in system preferences/sound I have digital out selected
Thanks for your help
Daron

Not sure if it will help resolve your issue, but you can make more detailed adjustments to the audio output using +Audio MIDI Setup+ utility, which is in your Utilities folder.

Optical Audio Out to Speakers?

I was wondering if it is possible to connect the optical audio out on my ATV2 to the 3.5mm audio jack on my bose Companion 3 speakers?
-thanks

To be honest I have no idea when it comes to this kind of stuff. I did find this link though.
http://forums.cnet.com/7723-7596_102-514932/bose-companion-3-and-other-audio-inp ut/
thanks for your help

Optical audio out & 5.1

Hi,
I wonder if the optical audio out of the ATV 2G is handling 5.1 audio signal.
Thanks.

DD5.1 is carried over both HDMI and optical (where the content has a DD5.1 audio track).

Optical audio out from Mac Pro to preamp

I want to use the optical audio out to a preamp. I am finding only very high end components. Is there anything affordable?

Do you already own the Mac Pro and preamp? All you need is an S/PDIF cable. Easily attainable for ~$20 or so. If it's not that simple, what are you referring to as "very high end components" being all you can find?

Question on optical audio out

Hi all, I recently got an entry level 5.1 surround system for my PC (Logitech X-530, if you're that curious) and am wondering if it's possible to utilize my optical audio out with this system. From what I gather, I'd need some kind of decoder, but beyond that, I'm lost. I've tried googling it and searched around this forum a bit, but I can't seem to be pointed to any one product that'll do this. Any help is appreciated.

Ok, the speakers you got are just powered speakers with analog inputs.
They do not have the better digital inputs and do 5.1 decoding.
Mac's don't do 5.1 decoding, so you need either a separate device (like a 5.1-7.1 decoding receiver with digital optical inputs) or a M-Audio sound card installed in your PCI slots.
The M-Audio card for the Mac will use your CPU's to do the 5.1 decoding and send it out analog ports which you can connect those speakers too.
The M-Audio card produces line level output, no amplification. But your powered speaks will do the amplification.
http://images.devshed.com/dh/stories/Logitech%20x530/image005.jpg
(The three plugs on the right are for connecting to a sound card)
If your really into better sound, a quality 5.1-7.1 receiver with digital optical inputs (toslink cable) and good speakers with 80+ watts each and a decent 100+ watt subwoofer will make you cry with happiness. Of course you need to pay over $1000 and up. But it's worth it if your into music.
Check out the Volume Logic iTunes plugin, it's cheap and makes your music sound so much better.
NOTE! Make sure you check that the current M-Audio card will work in your Mac. The PCI spec of the M-Audio card may not match the one's needed by your certain spec of PowerMac G5.

Analog vs. optical audio out ... and what cable to I use?

I've ordered an iPod Hi-Fi, which I intend to use in place of external speakers for my G5. I have two questions:
First, do I want to connect using the analog or the optical audio out?
Second, if the latter, what kind of cable to I need if the optical is preferable?
Thanks

I don't have a wireless network -- the house we live in is wired for Ethernet, and neither of us use a portable computer. My only concern, therefore, is to find a cable that will go from the PowerMac G5 optical audio out to the audio in on iPod Hi-Fi. From what I've been able to learn online, the former is Toslink, the latter -- as you say -- mini. So I'm assuming that the "mini-to-optical digital Toslink audio cable" will do the job.
I confess, however, that most of this information has not been easy to come by. Apple could certainly do a better job here.

What type of connectors needed for optical audio out?

Hi, looking at upgrading to an imac and I noticed on the spec it has optical audio out which would be great to go into my audio interface. What connector do I need? Is it TOSLINK type?
Had a look at the picture of the rear but couldn't see an optical out port, only the jacks for analogue. Where does the optical come out!?
Thanks!

If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
I use one myself, they work fine.

Does the MBA have an optical audio out (toslink)?

Does the MBA have an optical audio out (toslink)?

The MacBook Pro and iMacs have digital audio out routed through the headphone jack. A physical converter (costing a few cents) must be used to connect a regular TOSLINK cable.
The MacBook Air apparently does not have this feature.
As to true Thunderbolt 'adaptors' I have yet to see any hit the market. I would suggest not holding your breath while waiting for useful Thunderbolt technology to appear--one day perhaps, but not now. I would love to be proven wrong about this--I could really use the Thunderbolt<->FW800 adapter

Does anyone use Optical Audio out to connect studio monitors?

I am planning to snatch a Mac Mini as my studio upgrade. I am also planning on buying some studio monitors (as opposed to just regular speakers). I was wondering what people use to get great, accurate results for under $600. The Mini can achieve optical audio out, apparently. Are there studio monitors that use digital, optical audio as a means to connect? How do fellow Logic home studio users have their audio out set up?

Scroto Saggins wrote:
well, optical is digital (right?), so wouldnt it be the only way to get the best, uncolored sound out of a Mac? what other (better) options are there? I started this topic because I dont really notice studio monitors that use optical, and I am wondering why? Whats the downside?
Because the ones that do, are way over the budget of most people on this forum.
I have this pair :
http://www.jblpro.com/catalog/General/Product.aspx?PId=28&MId=5
They retail at around 1500 per pair. They are not the most expensive ones out there, rather the less expensive ones with digital inputs.
Cheers

How do I turn off the audio voice correction while texting??

Can someone tell me how to turn off the audio voice correction I keep getting while texting????

If you mean the phone is talking to you when you tap on things, go to Settings>General>Accessibility and turn off Voice Over.

Turn off Optical Audio out?

Similar Messages

Maybe you are looking for