Turn off or close screen

does anyone have a good guiding tip regarding when I should only close the screen when not working on it, and when it would be best to shut the computer down. I can't find any information regarding how much battery usage it takes if I only close down the screen.

Hello lehrmann
Welcome to Apple Discussions
There is really no need to ever shutdown your Mac unless you the Mac will not be plugged into AC power for long periods of time (like Days) or if you need to power down in an attempt to clear an unusual Mac anomaly. The Mac will use very very little power when the lid is closed.
Some will tell you that it's recommended to leave the Mac powered on and only close the lid so that the maintenance scripts will be run regularly.
I have been using Mac laptops for almost 10 years now and I never power them down accept for the occasions listed above, and I have never ever had a problem with the batteries running down. I can put my ol' Powerbook to sleep (simply closing the lid) with 99% battery and no AC attached, leave it for three days, lift the lid and it's instantly up and ready to play with around 70% battery left. I think that's pretty darn impressive!

Similar Messages

  • While i was updating my ipod touch it had an error and froze at the apple logo with a loading bar underneath.How do I fix it? Its stuck there,  tried everything, turn off button home screen button even the volume buttons, nothing is working.

    I was updating my ipod touch and the updation had an error and it froze at the apple logo with the loading bar underneath. How do I fix it? I tried the turn off button home screen button and even the volume buttons. I cant get anything to work. Please help me.

    Connect to itunes and retore.

  • I accidently click for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen?

    I accidently clicked for a full screen view on Firefox and now I can't undo it. My bar with tools, bookmarks, etc. is not visible. As the browser opens, the bar appears but then jumps up where it can't be reached. How do I turn off the full screen without access to view options?

    Co-el, This wasn't possible as there wasn't a navigation bar available. The F11 did the trick though. Thanks for adding to the discussion.

  • My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

    My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
    This is happening only since I have updated to new ios version (ios 8.1).
    Is there anyone facing similar issue?? Any suggestion?!?

    Hi jayla_mora, 
    Thanks for visiting Apple Support Communities. 
    It sounds like your iPhone screen is going blank and not responding. 
    You may find the tips in this article useful for troubleshooting this behavior:
    iOS: Not responding or does not turn on - Apple Support
    Best Regards,
    Jeremy

  • Can I turn off built in screen??

    I have a MacBook Pro 17", and I routinely connect it to an additional Apple 20" screen when at home.
    However, I have 1 program that does not like dual screens. In fact, it is a known problem with the program that it will not work correctly with more than 1 screen and it is listed as not something that is going to be corrected any time soon.
    Is there a way that I can turn off the internal screen of the MacBook Pro and have just the external running? I have looked, but I don't see anything about how to do that.
    I am also scheduled to do a demonstration of this program and would need to use a projector which will also make the program think it is dual screen, so I really need to know if I can turn off the built in screen of the MacBook Pro.
    Thanks!

    This is the iCal forum. Your question is likely to get a better response from the MacBook Pro forum.

  • Turning off the iPad screen when synchronizing with the iTunes

    Quick question: How do I turn off the iPad screen when synchronizing with the iTunes. Is this even possible? Are there settings I am overlooking? Or perhaps a third-party app which can make it happen?
    I have a large library and often leave my iPad connected to iTunes for several hours at a stretch. The bright glowing screen can be a big distraction, and, more importantly I am very worried about pixel burn-in.
    Cheers,

    The iPad LED Backlit IPS Screen is not phosphor-based, so there is no permanent phosphor burn-in problem. You might see some image persistence, but that is not permanent and can be corrected. See this support article about image persistence: http://support.apple.com/kb/HT2807
    Since you have already converted your music to 128 kbps, you are unlikely to see any more 10+ hour syncs unless you have to do a restore. In that event, you could select the brightness control in settings to the lowest level.
    FYI, there are some apps, such as Night stand HD that are designed to be used for long periods with unvarying displays and I have yet to see image persistence problems reported. However, since the iPad is still a new product, there may be some reports in the future.

  • Airplay streaming stops when you turn off the iPad screen

    Hi All,
    If you are streaming something from your iPad using Airplay, and you hit the button to turn off the iPad screen, it seems that the streaming stops...
    Is there any way to fix that?  I mean, if you are watching a long video, for example, you don't want your iPad to remain on the whole time.
    Any advice?
    - Thanx
    - Jon

    Jon-
    You are saying the AirPlay App does not work when the iPad goes to sleep.  Other Apps do, including the Music App, so you might expect AirPlay to work as well.
    Another limit may be the timer setting at Settings-General-Auto Lock.  Mine is set to 5 Minutes by default.  You may need to set yours to Never, to keep the iPad from sleeping while streaming.
    I suggest you provide feedback to Apple at <iPad Feedback>.
    Fred

  • HT201335 how do you turn off your mac screen when you are playing a movie thru air play on your tv

    New to mac's and new to know if you can turn off the mac screen when you play a movie thru air play to apple tv so your not having two sceens going.
    Tks

    Like how did nothing happen  >> no connection >> no message ??
    CAN I UPDATE   >>
    http://europe.nokia.com/support/download-software/device-software-update/can-i-update
     jje

  • My iphone 4 turns off automatically after screen lock

    Hello guys,
    my iphone 4 turns off automatically after screen lock, i have to press the POWER + HOME button during 10 secondes for reboot.
    And it's like that every time i lock the screen.
    Please can someone help me ?
    thanks.

    Standard troubleshooting steps are reset, restore, restore as new.
    Since resetting isn't working, try backing up and restoring through iTunes.

  • How can I turn off the home screen preview of SMS/text messages on 3GS

    How can I turn off the home screen preview of SMS/text messages on my new Iphone 3GS ?

    Go to Settings>Messages and choose "No" under "Show Preview" which will hide the text part of the SMS/text message but still will pop up on who its from and just says "text message" on it.
    Other than this there is not a complete way to disable the notification.

  • My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black.  I turn it off and then on again and the start up noise goes but it is still black - Help!?

    My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black.  I turn it off and then on again and the start up noise goes but it is still black - Help!?

    Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
    Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
    The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice.

  • Turn off this nag screen?? "Some text layers contain fonts that are missing"

    Hi all, I have recently been handed a web project from a mac user and everytime I open one of the pages I get the following message. "Some text layers contain fonts that are missing...etc" I have the same exact fonts but in the new open type format. Anyways apparently photoshop can't tell that. I would like to TURN OFF this nag screen. I am not even editing the text layer with the font.
    Is there anyway to turn off this nag screen? I turned off glyph protection in the prefrences and restarted photoshop to no avail.

    The missing fonts will be listed in grayed out color in the separate last section at the bottom of the font menu accessible from the text tool's property or the character panel
    The layers with missing fonts will have the warning sign on the layer's icon in the layer's panel however the missing font/s will be displayed with the correct font. When you try to edit the text on such layer, Photoshop will show a message with the missing font/s and will say that it will be converted if you edit it. If you choose OK, and you have different fonts on the same layer, watch which fonts will change appearance.

  • HT4528 my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?

    my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?

    I've tried that. It doesn't work. The only thing that happens is the apple comes up. I've tried holding the home as I'm plugging it in and keeping it held for a few minutes, but nothing happens. My iTunes doesn't even read that it's connected.

  • HT4993 Since i downloaded the 7 my phone turns off randomly, the screen freezes and it closes apps randomly

    Since downloading the ios7 my phone will freeze or just randomly turn off or an app i'm working in will randomly close. Anyone else having these problems?

    I would restore your device. Preferably with Itunes through a computer if you can. If not then settings>General>Reset>erase all content and settings. Save a backup if you need to through Icloud. That should clear up any software related issues.

  • Yosemite: Turning off Macbook Pro screen (lid open) with external monitor connected

    Here we go again, this worked pre-Yosemite. Now it seems this trick no longer works. After following these steps again the screen on my Macbook Pro now turns on after logging in and opening the clam shell.
    Anyone figure out/know a way to turn off the screen on the Macbook Pro with external monitors plugged in? (yes, closing the clam shell–but I'm referring to keeping the clam shell open with the display turned off)
    http://gizmodo.com/5938452/a-trick-to-make-using-an-external-monitor-with-your-m acbook-way-better
    To execute in Terminal:
    sudo nvram boot-args="iog=0x0"
    To undo in Terminal:
    sudo nvram -d boot-args
    Once you type it into terminal I believe you need to enter your password. I then restart my machine. Now the TRICK is to either restart your machine with the lid already closed (hit restart then slam the lid!) OR turn the machine on for the first time (then quickly slam the lid!) once you are past the login screen you can open the lid.

    Has anyone experimented with tip 2 (active corners)?  Perhaps it still works.
    http://www.cultofmac.com/176329/turn-off-internal-lcd-display-of-your-macbook-ai r-os-x-tips/
    Κοσμά τι λες; Τα έχεις μπερδέψει. Άλλο συζητάμε εδώ. Το ότι δεν μπορείς πια να δουλεύεις μόνο με την εξωτερική οθόνη (να έχεις σβηστή την ενσωματωμένη οθόνη όταν έχεις συνδεμένη εξωτερική).

Maybe you are looking for

  • How to move client from one server to other at remote location

    Dear All, We have two servers located in two different locations.Due to some network issues i am unable to do the remote client copy . Please suggest how do i take client 100 to other server which is at different location and on different platform. S

  • Can't pair iPhone 6 via Bluetooth

    I just got my iPhone 6 today. I tried to pair it both with my hands-free device and my Jam speaker. The phone doesn't find either device. Just spins and spins. The devices are charged, on and near the phone. I saw some solutions her and online, so I

  • Unable to read mp3 files on usb storage on my car radio

    Hello, I have bought a car radio (Kenwood KDC-261UB), to listen to mp3 files on usb storage and also on my iphone. Although connected to my iphone all is OK, each time I transfer mp3 files on a storage (whatever the capacity), the car radio is unable

  • Dimension ID question

    Hi Can someone tell me if there is any such recommendation or preference to use different IDs for the same purpose in 2 different dimensions. For example: ID - LC - Local Currency in dimension RptCurrency ID - LC - Local Currency in dimension Group (

  • Sequence in java

    Hi i am searching for smart way to create sequence for name not using varibale: int seq=1 for () { book = new book("Java book"); system.out.println("book_"+seq+ book .getName()); seq++; is there another way to print the books with sequence book1 book