Turn off passcode grayed out

i want to disable the passcode on my Ipad 2, but when i try to disable it the button to turn off the passcode is dimmed and won't let me toggle it. I have tried getting rid of my E-mail accounts, my icloud account, signed out of the app store, everything.
any suggestions and ideas.
if possible i dont want to restore my ipad.

Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

Similar Messages

  • How can i turn off passcode when the option is greyed out

    how can i turn off passcode in iPhone 4S when the option is greyed out?

    You can't. Do you have an Exchange account on the phone? If so, the ability to disable the passcode can be restricted by a profile installed when setting up the Exchange account.

  • HT4113 Can not turn off passcode lock

    I can not turn off passcode lock. I see it and it is grayed out. I can change the password, etc. but I can not turn it off  I plugged the phone into a friends computer a few days ago to charge it. Does that have something to do with it?

    There is an exchange account on the device and the Admins of that account require a passcode lock on the device.

  • Cannot turn off passcode lock on ipad ios 7.0.3

    I am unable to turn off passcode lock on an iPad running IOS7.0.3.  When I get to the screen in Settings > General > Passcode Lock, "Turn Passcode Off" is greyed out and cannot be used.  Hence I am stuck with having to enter a passcode even though I don't want to any longer.  The problem is not that I do not know the passcode, simply that I can't turn off the passcode lock.  Any thoughts?

    is this your iPad or one administered by someone else...for example if I use an iPad from work our IT policy dictates that I must use a passcode and I am not allowed to turn it off.
    If it's yours, just a shot in the dark, do you have restrictions enabled? If so, go in and disable them then see if that will allow you to turn off the passcode lock.

  • After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

    After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided.  I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out.  Also the scan function won't let me scan at any density greater than 150 dpi.  I have talked to Applecare and to HP tech support and been told "too bad."  Any help would be appreciated.

    THANK YOU!  And who are you?  I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words.  Many thanks!  John

  • I am unable to turn off passcode

    I am unable to turn off passcode and the passcode lock section "Turn Passcode Off" appears grey and its inaccessible.
    And I am using iphone 4 and iOS 7.1.2.
    Thanks in advance. 

    Yes, I have exchange email account in my phone.
    Thanks for the information.
    Cheers

  • HT1338 how do I turn off optical digital-out port?

    how do I turn off optical digital-out port?

    Just want to report that I too, running 10.6.5 on a MacBook Pro, had the mysterious " Audio Out Stuck On Optical Digital-Out Port" problem whereby I was unable to adjust the volume on my built-in speakers and they were permanently "muted" because the operating system was sending the audio signal to a non-existent device that it falsely thought was plugged in to my unused headphone jack hole. I thought at first the problem must necessarily be software-based because the built-in speakers worked fine when playing the start-up chimes. So I uninstalled something called "Soundflower" which does some mysterious shenanigans with commandeering the internal audio signal so that one can make audio recordings of one's computers' sound effects. But uninstalling Soundflower had no effect. So I uninstalled some other audio-related software, also to no avail. Then I zapped the PRAM, to no avail.
    Then I decided to try what some people call "the toothpick trick," i.e. poking around in the headphone jack hole to see if something was stuck in there shortcircuiting it, and initiating the false signal to the OS.
    Bingo! Success!
    Actually, I did a hyper-sophisticated version of the toothpick trick:
    First, I own a home "otoscope," one of those doohickeys that doctors use to look into your ear. One can now buy amateur versions of otoscopes for home use, to looks for kids' ear infections, etc. (They only cost $30 or so.) Anyway, using the smallest attachment designed for babies' ears, I was able to look (with illumination) into the headphone jack hole and yessiree there was a big bunch of dust stuck way deep in there.
    So then I took not a toothpick but instead a slender dental prong-pick thingie made of stainless steel, and very delicately was able to snag the clot of dust deep in the hole at the bottom on the first try. Quite a wad!
    Then I took one of those rubber ear-bulbs, used for cleaning out your ears, and used it as a micro-vacuum-cleaner: Squeeze the rubber bulb til it is as empty as can be, then place the tip of the bulb at the entrance to the headphone jack hole, then suddenly release my grip: it ***** air out of the tiniest spaces! After doing this a few times, I then did the reverse and blew blasts of air into the hole.
    After all this, I looked back into the hole with the otoscope, and it was sparkling clean! Not even the tiniest speck of dust in an area that just three minutes earlier was thick with dust.
    I then turned my computer back on and...problem solved! The audio worked again like normal, and it was no longer detecting an imaginary "Optical Digital-Out Port" device. The internal speakers once again worked as normal, and the volume could be adjusted.
    I guess the problem for me really was dust causing a short-circuit. It might very well be the same for you -- so try cleaning out the headphone jack hole as I did.
    I'm writing this detailed description to help anyone else in the future with a similar problem.

  • "Turn Passcode Off" is grayed out.

    After upgrading to iOS 7 on my Ipad 3 the "Turn Passcode Off" button is grayed out. I did have an Exchange account on it, but I have since removed it. I also have an iPhone 5 on iOS 7 and I can turn off and on the passcode at will even with an Exchange account. I have reapplied the update and restored same thing. Then I completly reset it and I could turn it off and on. But as soon as I restored the passcode lock came back. Also as not "Erase Data" is also grayed out.

    Reset all Settings will work. I canceled it though before it started.
    Also if it matters I can change my passcode, just not turn it off.

  • Greyed Out "Turn Off Passcode" Button -- Inherited iPhone

    Hey gang,
    My mother just upgraded to an iPhone 4 yesterday and passed along her iPhone 3G to me (who hasn't had a new iPhone since the original). I've managed to set up everything properly as far as I know, but I can't turn off the passcode option. She has said that the hospital she works at required her to have a passcode, which explains why, but I'm curious -- is there any way that I can turn it off, since it's no longer necessary?
    Thanks a bunch!

    You'll have to restore the phone as a "new" device in itunes, NOT from backup to remove that setting. Follow that by syncing your itunes content back to your phone.

  • Cannot turn off passcode

    After 2 years my ipod asked me to change my passcode. it was never turned on. now i cannot turn it off;it is greyed out so i have to use a passcode.

    Just what are yo trying to do?
    Just what did the message say?
    What is grayed out?

  • How do I turn off passcode for when my daily alarm rings?

    Guys, since I updated to 4.3.3 I'm having an annoying problem with my daily wake up alarm.
    When it goes off in the morning I slide to unlock as normal but then I have to enter my passcode. I never had to do this before.
    I don't want to turn passcode off due to security reasons but I also don't want to have to enter my passcode when I can just slide to turn off the alarm instead!
    How can I overcome this problem? I looks everywhere for a solution but no luck.
    Thanks

    Hi Jeremy,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • My iphone 4s wifi on/off appear grayed out or dim i can not use and battery got problem with retain charge even not in use. and i am in india here no taking my product for repair . how i sort out this issue

    Hi,
    i bought iphone 4s in london but now return to india . right now i can not access wifi option because wifi on/off grayed out or dim . and also battery got problem to retain power it automatically loose power even not in use. i went to local apple service centre they said could not repair in india.they said talk to uk apple centre. so what i do now please any one give guidence .

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • My iPhone 4S has started to turn off before its out of battery. There is no pattern it is completely random so I don't know when it will turn off, when I try to turn it back on it says it needs to be charged.

    As soon as I plug it in to the charger it reboots to the same percent it was originally on before it turned off for example today it turned off on 10% I tried to turn it back in and it said out of battery so I plugged it in to the charger and it immediately rebooted showing the apple logo and the phone was on 10% when it was fully rebooted.
    I was wondering do I need a battery replacement or is this something more serious.
    Many thanks.

    Hi Lukeohiggins,
    If you are having issues with your iPhone unexpectely powering off, you may want to try the troubleshooting listed under Power/Battery > Will not turn on, will not turn on unless connected to power, or unexpected power off in the following article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    - Brenden

  • 3.1 now can't turn off passcode

    Before updating, I had the passcode set for 1 hour (I knew I needed some protection in case the phone was lost/stolen but I didn't want to unlock the phone all day long). Since the update, my options for passcode time is limited to 5 minutes and less. And, there appears no way to turn off the passcode!!
    Even the genius bar couldn't help me with this today. Can you guys??

    If you use an Exchange account, those restrictions may be imposed by the Exchange Administrator. You should check with him or her.
    "Additional device restrictions are now available, including the ability to specify the length of time that a device can be left unlocked, disable the camera, and prevent users from taking a screenshot of the device’s display." http://manuals.info.apple.com/enUS/Enterprise_DeploymentGuide.pdf

  • Cannot turn off passcode after ios8 upgrade - iPad mini

    Upgraded iPad mini to ios8 and cannot turn off the passcode.  In settings, I can turn it off but it tells me that I need to set a passcode within 60 minutes.  It then counts down and requires me to set a passcode once 60 minutes are up.  Also does not let me change duration of passcode (from immediately to 4 hours for example).  Any thoughts on how to turn it off?  Thanks.

    is this your iPad or one administered by someone else...for example if I use an iPad from work our IT policy dictates that I must use a passcode and I am not allowed to turn it off.
    If it's yours, just a shot in the dark, do you have restrictions enabled? If so, go in and disable them then see if that will allow you to turn off the passcode lock.

Maybe you are looking for

  • How do I add apps--dropbox, etc.--to my iPad AirDrop?r

    When I want to 'send' a file or a link to another device on my iPad I am limited to only a handful of apps in AirDrop.  How to I add additional apps like, for example, Dropbox or Copy or Pages? Thanks.

  • Bankdata in XL Reporter

    Hi@all where can i find the bankdatas in XL Reporter? i want to make a report to show, wich partners dont have any bankdatas. i know that it is part of the OCRD but i cant find it... please help... regards Bernhard

  • Bex Analyzer 7.0 - BexEventHandler in Netweaver 2004s

    Hi, I noticed that in Bex Analyzer 7.0, there is a new class called BexEventHandler which gets hit each time I select a cell or a worksheet within my VBA code.  This did not happen in Analyzer 3.5.  And because of this, I am experiencing major perfor

  • Why is Premiere Elements putting a black border around my video?

    I am getting by OK with editing my videos in Premiere Elements 3.0 (I know, the shame). However, when I have finished editing, I need to output to a specified frame size to fit a video screen on my web site. All videos that have been edited for me by

  • CRM ORG is supporting only one sales group to only one sales office,

    Hi Users, CRM system is supporting only one sales group to only one  sales office, not supported to multiple sales offices. Per ex : Sales Organization     Distribution Channel     Division        South Sales Office     South Sales Group