Turn off presentation mode in ipad when connected to projector

Hi, I'd like to present the features of Neu. Annotate from my ipad. The problem is when I plug into the projector the ipad goes into presentation mode and the audience cannot see the tool bar. I need them to see the tool bar to understand the app. Any suggestions?

I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
Here what I figured out so far:
1. It happens when you have PPT open and connect to beamer afterwards
2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
So in short: Connect to beamer first, then launch PPT
I know it is only a symptom fix but it worked for me

Similar Messages

How to turn off screen on Macbook Air when connected to Computer LeD monitor?

How to turn off screen on Macbook Air when connected to Led monitor screen?

The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
Matt

Can I turn off my MacBook Pro screen when connected to an external monitor?

I have my 13' MacBook Pro connected an external Samsung monitor, is it possible to have the laptop screen turned off so that it is only displayed on the monitor screen?

This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

I forgot my ipad passcode. I tried to restore ipad using the recovery mode option. However when I try this iTunes askes me to turn off the "find my ipad" option (which of course I cannot do as I cannot open the ipad).

I forgot my ipad passcode. I tried:
1. Simply to restore the ipad on the computer it is normally synced with, but it askes me to enter the passcode.
2. to restore ipad using the recovery mode option. However when I try this iTunes askes me to turn off the "find my ipad" cloud option (which of course I cannot do as I cannot open the ipad).
3. to remotely erase my ipad, but as it is locked down it does not seem to be connecting to the internet and hence cannot seen through my "find my ipad".
I am completely stuck! Any suggestions please?!?!?

I forgot my ipad passcode. I tried:
1. Simply to restore the ipad on the computer it is normally synced with, but it askes me to enter the passcode.
2. to restore ipad using the recovery mode option. However when I try this iTunes askes me to turn off the "find my ipad" cloud option (which of course I cannot do as I cannot open the ipad).
3. to remotely erase my ipad, but as it is locked down it does not seem to be connecting to the internet and hence cannot seen through my "find my ipad".
I am completely stuck! Any suggestions please?!?!?

Grandkids set up ipad2 for grandma. Passcode forgotten and never used again. The ipad was never turned off, and was never synced or connected to main PC. No iTunes installed on PC. Yesterday while visiting with owner, I downloaded an app for her.

Grandkids set up ipad2 for grandma. Passcode forgotten and never used again. The ipad was never turned off, and was never synced or connected to main PC. No iTunes installed on PC. Yesterday while visiting with owner, I downloaded an app for her. It installed and restarted the ipad. Passcode is now needed. What to do?

If Find my iPad was never set up then scroll down & follow the directions under Recovery Mode:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
If it was and the activation lock is triggered, then you will need to know the original Apple ID & password that her grandkids used to set it up or have them sign into iCloud & remove the device from Find My iPad before you can Restore it.
iCloud: Activation Lock
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support

Why am I told to turn off airplay on my iPad (3rd generation) when it does not even HAVE airplay according to iOS7 specs?

Why am I told to turn off airplay on my iPad (3rd generation) when it does not even HAVE airplay according to iOS7 specs?

I have the same problem with my device specially with the NFL App and after maybe 2hrs of research I found out that Verizon has implemented that messege/restriction to keep the app "TRUE" mobile only. What I'm saying is that you won't get the NFL App to play no matter what you do if connected to HDMI adapter or AirPlay. I hope this helps more than the other/previous post. If you need re-assurance please click on the link where I found my information, below.
http://www.sbnation.com/nfl/2013/6/4/4394986/verizon-nfl-extension-stream-games
v/r,
Rigo

Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

My iPhone 3gs backed up to the iCloud just fine, but my new iPhone 5 gives me an error and says to turn off airplane mode or use wi-fi. It is connected to my wi-fi and airplane mode is off. It can see the internet just fine. What gives?

I backed up my iPhone 3GS to iCloud. Activated my iPhone 5 and restored it from iCloud. But iPhone 5 will not backup to iCloud, only to my MacBook. When I try to turn it on on the phone it gives me an error that I must turn on Wi-Fi or turn off Airplane mode. Wi-Fi is on an the phone is talking to the internet just fine and airplane mode is off, but I still get the error. Is this a known problem?

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

TS1875 when trying to turn off compatibility mode on my itunes, i dont have a compatibility tab after right clicking properties. Can any one help

When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???

Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik

Anyway to turn on presenter mode without inserting audio visual cable on Ipad??

anyway to turn on presenter mode without inserting audio visual cable on Ipad??

This is the Mac discussion, try posting in the iPad discussion for an answer

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do I turn off compatibility mode for iTunes?

Recently computer keeps on telling me to turn off compatibility mode.
I have tried looking at previous answers but cant find what the instructions tell me. I get as far as opening the itumes folder and then it says right click on the itune ort itunes .exe . I can see lots of files. when i click on the one that says itunes it actually opens up itunes and cant see one that says itunes.exe. thx.

I think I have found a way to do it.
Go to start button
Type into search programs and files
itunes
right click
the compatibility tab then appears and can be switched off.

I have windows 7 and I can't sign into ITunes. Message says to turn off compatibility mode to use. How and why do I need to do this?

I have Windows 7. I was previously using Windows 98 when I set up ITunes and developed a library of music and movies. When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes. Where and why do I need to do this?

Hi there skinguru,
You may find the information in the article below helpful.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/ts1489
-Griff W.

How do I turn off Private Browsing in Safari when there is no choice in the Settings app?

How do I turn off Private Browsing in Safari when there is no choice in the Settings app?

To turn on private browsing, tap Safari, then tap in the lower-right corner. Tap Private to turn private browsing on.
Note: If you're using an iPad, tap , then Private.
Tap again > turn off private.
http://support.apple.com/kb/ht1677

MiniDisplay to HDMI : How to turn off the Dual Monitor output when..

miniDisplay to HDMI : How to turn off the Dual Monitor output when the adapter is attached and the TV is off ? And will keeping the adapter connected even if it is not in use, cause damage to the adapter ?

I have my external monitor/tv setup of the left. If I leave the adapter attached with the TV off, I am still able to cross the border/boundry of my MBP screen ! As instead of detecting a TV, the MBP is detecting the adapter as a screen. I do not want to damage my thunderbolt/miniDisplay port by plugging and unpluggin the unit each and every time.

Turn off presentation mode in ipad when connected to projector

Similar Messages

Maybe you are looking for