Turn off save dialog box when the close command is executed

I would like to set the default value of the save dialog box to No when my users close my form, so they do not have to manual answer this question. Is it possible to do this or is there a commmand I can place in docClose to tell the form to close without saving?
Thanks
-Anne

The Downloads folder defined in Mail/Prefs/General is just to temporarily store decoded attachments.
The Save dialog is available by pressing *and holding* the Save lozenge button next to the attachment(s) in the message header header, or right-clicking/save attachment on files visible in the message body.
(Having to click and hold the save button to get something useful is extremely bizarre, and IMO broken)
You can also drag and drop items from the message to a Finder window or whatever.

Similar Messages

Pre Turns Off or Shuts Down when I close the keyboard

Is my pre screwed or is it OS?
It shuts off, not the version that other people have had where you have to pop the battery (the power button still works to turn it back on) out to get it to restart. Anyway, it shuts off when I slide it closed. I thought maybe something loose so I did it very slowly, not allowing it to even go all the way, the minute that the sensor tripped it back into "no keyboard" mode it turns off.
It's especially bad when on bluetooth...happens every single time.
Is there a solution for this. Please palm, a lot of people are having this problem and there is no answer yet?
Post relates to: Pre p100eww (Sprint)

Palm is on deathwatch. The Pre could have really kept them afloat, but there are too many problems with it. When I first got my Pre in June, it was awesome! Everything worked great. But now, I am always having problems with it. Here is the list:
1. Pre turns off or shuts down when I close the keyboard. (I had to make this one the first on the list since it is the topic.)
2. Pre turn off or shuts down for no apparent reason and the only solution is to remove the battery, wait a second, put the battery back in, then turn it back on. This takes forever. Plus, because I have removed the back so often, my Pre squeaks when I am typing (from the plastic). It is very annoying.
3. The navigation system has a glitch where most of the time, it cannot find my current location. The message says to make sure I am in clear view of the sky, but i always am. There are many posts about this problem in other sections. There are some solutions, and the often work, but it takes 5 minutes to reset the system. It is a beating.
4. The navigation system voice is usually very clear, but sometimes, the voice will skip over the names of streets as she is calling out the directions. Ex. "Turn right on ________ Drive."
5. Sometimes the keyboard will stop working. I have to remove/replace the battery. Again, this is time-consuming and further contributes to the squeaking problem when typing because you have removed the back so many times.
I like Sprint because I can get unlimited data, txt, and mobile-to-mobile calling for $70/mo. So, I hope that someone comes out with a great touch-screen phone (not the BB Storm), because I want to stick with Sprint. If you go with an iphone, you have to get AT&T, which will cost you at least $100 for the same. That is a $360/yr difference! I am sticking with Sprint.

Open/Save Dialoge Box covers the whole screen - CS3/Vista

Hi,
I´m using Photoshop CS3 on Windows Vista and I have the following problem:
I can´t reduce the open/save dialoge box in Photoshop CS3 as I could in earlier versions, which I find very inconvenient.
It stretches over the whole screen and there seems to be no way of reducing it. There are handles at the corners but they don´t work.
Is this normal in CS3 or could it be just a wrong setting in Windows?
I hope somebody can help me on this, thank you so much!
Best regards,
Mike

Is this normal in CS3 or could it be just a wrong setting in Windows?
No, it's not normal. There are two things I can think of:
- the dialog repositioning feature of your graphics card is not working properly (NVidia Desktop etc.)
- you resized the dialog in another program and now the huge size has become the system default
In both cases the solution should be pretty obvious - either adjust the settings/ turn off the graphics card's special features or resize the dialog back in the program it was turned huge in the fi8rst place. For the latter, also checking your more general folder view options as well as manually deleting desktop.ini files may offer a way out.
Mylenium

Turn off print dialog box

I want to turn off the print dialog box in Adobe Reader. I want a similar function "quick print" that Word has in order to use Adobe Reader more efficently with other software. Is this possible?

You will have to write some custom JavaScript and with versions 7 or newer or Acrobat/Reader, you will need to install a special script in a special application folder due to revised security restrictions. You will also need to write a script file to add a menu item or tool bar button.
The basic Acrobat JS code is:
// Print a file silently
this.print({bUI: false, bSilent: true, bShrinkToFit: true});

Turn off metadata display box when mousing over photos?

When mousing over photos in the viewer or browser, a box pops up next to the cursor showing metadata. I find this very distracting and annoying when editing a photo or confirming faces. In Aperture 2, you could turn it off under preferences, but for the life of me I can't figure out how to turn it off in Aperture 3 (metadata has a separate tab rather than controlling the viewing of metadata under preferences in A2). Hitting the letters Y and U work in the viewer and browser, respectively, but only for one photo - doesn't stop it for good. I've tried messing around with all the other metadata view settings. Any ideas?

Hitting the letter T toggles the display, you can adjust this setting with Command -J.
HTH
wok4

CS6 Multicam Edit - Is there a way to turn off some camera angles when the system gets strained?

I'm doing a multicam edit in cs6 and the 5 camera angles I have are straining my system. I have two main angles and three kind of back up go pro angles that I don't need most of the time. But I don't want to get rid of them either. Is there a way to turn off monitoring some of the angles at times so that video will playback smoother? Then when I need the other angles, switch them back on when I want? The video is so choppy with all 5 angles monitoring at once that multicam editing is basically impossible. I'm editing on what's supposed to be a very fast system at work but it's not fast enough...Thanks!

I'm not aware of any way to do this. You might want to invest in a battery case if this is a problem for you; our users here all have them.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback; I agree it's a good idea.

How do I turn off Find My iPhone when the Apple ID (email) is no longer available and I don't know the password?

The email which was used for my iCloud and Applie ID is no longer available to me and the password is not being recognised. I need to update my iphone to the new iCloud account and I am unable to delete the old as it keeps asking for the pasword for the old id / email to turn off Find my iPhone

Well if he /forgot/ his apple id then what he should do is to look up all of his email addresses to try to get the crendential's back...if he can't remember that then your brother gave you a beauitful paperweight, I hope you didn't pay for it

The default name of the document in the Save dialog box in the browser

I have JSP page which retrieves a document from a database and either displays it in the browser window(if it can be displayed as for pdf or word documents) or offers the user to save it on disk. Everything works fine except for in the latter case in the save document dialog browser offers the user to store the document with jsp page name and extention by default. I store the file name in another field in the database and want to use this name by default. Is there any way to control the name of the document which browser offers by default ?

Yes, there is a HTTP Header called Content-Disposition you can set the filename with that, here is some code from a JSP I use to download software from a database to the browser.
response.setContentType(doc.MimeType);
response.setContentLength(doc.BinaryData.length());
response.setHeader("Content-Disposition", "filename="+doc.Filename);
ServletOutputStream stream = response.getOutputStream();
byte[] data = doc.BinaryData.getBytes();
for(int i =0;i!=doc.BinaryData.length();i++) {
stream.write(data);
Now this all works in every browser except in Microsoft's Internet Explorer browser (ofcourse!) the "Save as" filename then is taken from the last part of the URL that looks like a file name!!! So my URL to the page that has the above code would look like /downloadSoftware.jsp?id=1234&file=somefile.ext and I don't do anything with the file parameter, it's just here for IE. This means all browsers that adhere to the HTTP standard will work and then Internet Exploder will also work...
Hope that helps

To turn-off resend dialog box in firefox

When clicked on back button ,firefox asks for whehter to resend details or not which is quite annoying is there any way to stop in code well or @ firefox end

I get around that message by not using the Back button on websites that I know from experience are going to want resend information when I "go back", by selecting the previous page I viewed in the history drop-down on the Unified button, I don't get that "warning box".
Either that, or I open the link in a new Tab and then close that Tab when I am done with that page.

How can I turn off "Find My IPhone" when the phone won't turn off but the screen doesn't work?

My IPhone has water damage so the screen has stopped working, even though the phone is still on. I need to restore the phone to send it back to the company, however when I try to restore it on the computer, it prompts that I need to turn of "Find My IPhone" in order to restore the phone. How can I do this on the computer with out use of the IPhone??

You can't.

How to turn off the dialog box in the Write to Spreedsheet File

I am saving data in a loop using "Write to Spreedsheet File". When I gave a constant path to this Vi, it was fine. However, when I gave a path defined by a global variable, it consistantly popup dialog box and asked for my choice.
How can I turn off that dialog box?
Thanks.

Simply ensure that the path in the global variable is valid.
It could be that you have a race condition and the global is read before a valid value gets written to it from elsewhere. Can you show us some code?
LabVIEW Champion . Do more with less code and in less time .

MS Word: This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box.

This is not a question. I believe I've found a new issue and the fix for it.
The situation:
A brand new iMac 27" running Yosemite 10.10.1
MacMini server running 10.8.5 server.
The issue:
Client on iMac trying to work on MS Word documents stored on server was requiring him to save the documents to his desktop and then copy them back to the folder on the server. The exact error message was, "This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box."
The issue is unique to this computer in an office of 10 client computers and three servers.
Attempted fixes:
Verified that the ".Temporaryitems" folder existed and the permissions were set properly.
Repaired permissions on the client and the network share.
Definitive fix:
By default, Yosemite 10.10.1 uses SMB for connecting file shares. When I overrode the default and switched to AFP protocol, the issue went away.
I hope this helps someone else.
Rob

That was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.

Save Dialog Box

Apparently I am in the extreme minority, but I really do miss the save dialog box when saving attachments in Mail. Is there anyway to kill off the automatic saving to the Downloads folder? And no I am not interested in merely moving the default from automatically saving all attachments to Downloads to automatically saving to some other folder.
I maintain some 2000 plus clients and multiple projects for each client on my hard-drive. Each client and project is set up in hierarchical folders. I have been too busy recently to go through the Downloads folder and move the downloaded attachments to the proper client and project folders so my Downloads folder built up a sizable backlog. After spending more than two hours just moving files from Downloads to the folders where they are supposed to be I have finally reached my breaking point.
Prior to the creation of the Downloads folder Mail would offer you a save dialog box like most other programs and you could navigate to where you wanted particular files saved. Is this just impossible to do in the current incarnation?
I am almost positive this is not something that can be fixed through the standard preferences dialog box, but I am hopeful that it may be one of those things that can be edited in the plist file. Any ideas?

The Downloads folder defined in Mail/Prefs/General is just to temporarily store decoded attachments.
The Save dialog is available by pressing *and holding* the Save lozenge button next to the attachment(s) in the message header header, or right-clicking/save attachment on files visible in the message body.
(Having to click and hold the save button to get something useful is extremely bizarre, and IMO broken)
You can also drag and drop items from the message to a Finder window or whatever.

Open/save dialog box using javascript.

Hi,
working on apex4.1
How i can display open / save dialog box when click on button or link using javascript.
Thanks & Regards
Vedant
Edited by: Vedant on Jan 27, 2013 10:20 PM

Hi,
I am using model dialog box.
on page header i have copy The code as given in this http://jqueryui.com/dialog/#modal-message link
// page header code
<!doctype html> <html lang="en"><head> <meta charset="utf-8" /> <title>jQuery UI Dialog - Modal message</title> <link rel="stylesheet" href="http://code.jquery.com/ui/1.10.0/themes/base/jquery-ui.css" /> <script src="http://code.jquery.com/jquery-1.8.3.js"></script> <script src="http://code.jquery.com/ui/1.10.0/jquery-ui.js"></script> <link rel="stylesheet" href="/resources/demos/style.css" /> <script> $(function() { $( "#dialog-message" ).dialog({ modal: true, buttons: { Ok: function() { $( this ).dialog( "close" ); } } }); }); </script></head><body> <div id="dialog-message" title="Download complete"> <p> <span class="ui-icon ui-icon-circle-check" style="float: left; margin: 0 7px 50px 0;"></span> Your files have downloaded successfully into the My Downloads folder. </p> <p> Currently using <b>36% of your storage space</b>. </p></div> <p>Sed vel diam id libero <a href="http://example.com">rutrum convallis</a>. Donec aliquet leo vel magna. Phasellus rhoncus faucibus ante. Etiam bibendum, enim faucibus aliquet rhoncus, arcu felis ultricies neque, sit amet auctor elit eros a lectus.</p> </body></html> My Button name is "DOWNLOAD" and on button actions "REDIRECT TO URL"
on URL TARGET value is ==javascript: myFunction();
where i have to write this code to bind my apex buttons with dialog box.
apex.submit(myRequest);the steps i have written above, am doing right or not? Please help to place the code in apex with a right way.
Thanks & Regards
Vedant
Edited by: Vedant on Jan 28, 2013 12:53 AM

Autofs.service causing problems with gnome's save dialog boxes

Recently I have been having a problem saving files to disk using the gnome save dialog box when autofs is running. Basically what happens is most of the folders on the right side of the save dialog disappear (see screenshot below) and remaining few become unresponsive when clicked. If I wait a few minutes the folders will eventually appear and work when clicked, but needless to say this is annoying.
I can "fix" this problem instantly by simply running systemctl stop autofs.service, but this is not a good solution because I like the convenience of mounting my NFS shares on demand.

Recently I have been having a problem saving files to disk using the gnome save dialog box when autofs is running. Basically what happens is most of the folders on the right side of the save dialog disappear (see screenshot below) and remaining few become unresponsive when clicked. If I wait a few minutes the folders will eventually appear and work when clicked, but needless to say this is annoying.
I can "fix" this problem instantly by simply running systemctl stop autofs.service, but this is not a good solution because I like the convenience of mounting my NFS shares on demand.

Turn off save dialog box when the close command is executed

Similar Messages

Maybe you are looking for