Turn off screen saver when unit is charging

Okay
I am in the car and I have my Iphone on charge, and I am using Maps.
How do I stop the phone going into power save mode (screen darkens then screen saver) without permanently disabling the power saver option?

No, that's the only way to do it unless the app you're using has a feature in preferences to prevent the phone from sleeping while the app is in use.

Similar Messages

  • How do I turn off screen saver whilst running time machine backup?

    My hard drive failed today when my MacBook Pro took a tumble from the sofa.
    I have replaced it and am trying to restore from a time machine backup.
    I have to use the snow leopard installation disc that came with the machine, once I get into disk utility I can format the new drive and select restore from time machine backup.
    This all runs great until the screen saver kicks in, normally around 1% into the restore. This crashes the restore and gives me the grey screen of death, it's done it four times now.
    Is there anyway to disable the screensaver? Or will I need to install snow leopard first and then software update and then restore from backup once I can turn off the screen saver in system properties.
    I paid a lot of money for the time capsule and having these issues the first time I truly need it is disconcerting.

    Hi Mewnor,
    Is there anyway to disable the screensaver?
    This might help you if your computer is running Mountain Lion (OS X 10.8.3). I can not help you if your computer is running Snow Leopard.
    System Preferences > Desktop and Screensaver > Start After > Never
    Regards,
    Ian.

  • How to turn off screen saver?

    Why does my ipone go blank after i dial a number?  Is there a screen saver option?

    You mean when you hold it up to your face to talk? It's supposed to do that so you don't press buttons with your cheek... If you are on speakerphone or headphones, the screen will dim, then blank after a short time to save battery.

  • Turn off screen problem!!!

    I have a serious problem with TURN OFF screen button.When I touch it I have 3 options.Restart,Stand By and Turn off.Every time I press ''Stand By'' everytime the tablet restarts!!! I have tried so many times and every time I have the same problem.I tried also with password to be stand by but again the same problem.The tablet restarts!!!I don't have any problem pressing ''Turn off'' or ''Restart''.Only with this.So,as a clue of all these what can I do for that?Thanks

    NO, it just resets it like if it were to freeze up.
    There are 10 types of people in this world: those who understand binary and those who don't.

  • I need an application which turn off wifi automaticly when my Ipod Toch is locked (for save battery charge), i hate every time to turn it off manually please help ASAP!!!

    I need an application which turn off WiFi automaticly when my Ipod Toch is locked (for save battery charge)
    I hate every time to turn it off manually when I go sleep please help ASAP!!!
    If I forget to turn of wifi on my device after my 8hour dream it's battery will be discharged. and ofcourse alert do not ring. pls help urgent!!!
    Thanks

    Suggestion:
    Turn off your device before bed.

  • I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do?

    I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do? iTunes wont even recognize that an iPod is connected.

    Try to connect in reocvery mose, explained in this article:
    iOS: Unable to update or restore

  • How to turn off screen on Macbook Air when connected to Computer LeD monitor?

    How to turn off screen on Macbook Air when connected to Led monitor screen?

    The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
    Matt

  • HT4623 since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails.

    since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
    (PS: i know we could use 3G but i want to use wifi instead)

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • Can I keep iOS 7 from turning off my Wifi when screen locks

    can I keep iOS 7 from turning off my Wifi when screen locks?

    No. The Wi-Fi auto-shutoff is meant to be a means to conserve battery life.

  • My iPhone 4 with IoS 7 keeps randomly turning off. Also, when I plug it into my charger it keeps losing service untill I unplug it. Please help!

    My iPhone 4 with IoS 7 keeps randomly turning off. Also, when I plug it into my charger it keeps losing service untill I unplug it. Please help!

    Take the device to Apple for evaluation.

  • How do you turn off an iphone when the usb to itunes is diplayed on the screen

    How do you turn off an iphone when the usb to itunes is displayed on the screen and it wouldn't shut off

    Jerry4321a wrote:
    How do you turn off an iphone when the usb to itunes is displayed on the screen and it wouldn't shut off
    You cannot...
    You need to Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.

    Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.

    Try a Safe Mode boot ...
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from the Apple () menu.

  • Turning off power saver temporarily.

    Is there a way to let the computer know I want to turn off power saver(dimming the screen then turning the display off) when watching DVDs? I seem to remember it was automatic with an older version of DVD player. Also is the solution applicable to VLC?

    Yes, but I have to do this every time I want to watch something with either of those programs. I'm sure the old version automatically overcame this problem. At the moment I have to keep moving the mouse or touching the keyboard every few minutes.

  • Turn off screen while using Drive

    Hi,
    How can I turn off screen, to save battery, while using Drive? When I press power button, screen turns off, but I lose voice navigation.

    Hi karlo1020lumia,
    Welcome to the forum!
    What is the model of your device? If you're referring to the Nokia Drive application, this is a normal behavior. The screen must be active for the application to work properly. If your concern is about the phone's battery, you can check this link for the tips on how to prolong the battery life of the device:
    Battery - Making it last
    Hope this helps. Let us know the outcome.

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

Maybe you are looking for

  • Filling out PDF Forms

    I have Adobe Acrobat 5.0 on my computer. I have a number of PDF forms that I would like to fill out, save and print out. I know I can print the forms out and then use a typewriter or ball-point pen to fill in the blanks, but who in the world would wa

  • Creating 2 different WEBI report in One report

    Hi, Can we create 2 different report in one report and some how direct the queries associated with these report individually so that i get value specific to that report only. Edited by: ashok119 on Sep 29, 2010 11:36 AM

  • Goods Movement Cancellation

    Dear Friends I have an RO/SO for which we have created goodsmovement in 05/2008 and want to reverse the same in current period. but while doing it I am getting error as RE Quantity moved exceeded by 1 EA : MATERIAL PLNT Storage LOC Message no. M7022

  • PPOME - infotype 0000 not update

    hello. is there any way when I change an employee from one position to another using the PPOME it generate a record in infotype 0000? He throws in infotype 0001. Thanks

  • Datasrc dimension

    Hi friends, Can anybody eloborate usage of dimension 'Datasrc'. Is it supports only 3 values(manual,dataainput,total adjustment)? where exactly we use this and where it is mandatory? Raju