Turn off service and port

Hello
I am workstation user. I am new to Arch . I come from slackware, but i can´t figure out to turn service and port of in Arch
In Slackware I use the following comands:
Block off all in /etc/inetd.conf
Block off in /etc/services everything except
ssh 22/tcp #Secure Shell Login
ssh 22/udp #Secure Shell Login
syslog 514/udp
And then run the comand /etc/rc.d/rc.inetd restart
But /etc/inetd.conf and /etc/rc./rc.inetd don´t excist in Arch :?:
How do I use this in Arch Linux

carl wrote:
But /etc/inetd.conf and /etc/rc./rc.inetd don´t excist in Arch :?:
How do I use this in Arch Linux
Arch uses xinetd by default.
EDIT:
Oh, and you don't have to block anything if you didn't enable xinetd in your /etc/rc.conf DAEMONS line. If you did enable it just edit xinted config like you did with inetd. I guess you can also restart xinetd with /etc/rc.d/xinetd restart.
More info:
http://www.archlinux.org/news.php?skip=90
http://bbs.archlinux.org/viewtopic.php? … netd+inetd
Also check other daemons that may be running without xinetd with open ports. Disable everything you don't need in rc.conf and/or configure daemons' configs or use iptables to restrict access. There is a lot of info out there in the forums and google of course.

Similar Messages

I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

Hi can you still turn off 3G and use only GPRS service on the 5s?

Hi can you still turn off 3G and use only GPRS service on the 5s?

Whether you have a setting to do such is determined/controlled by your carrier.

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

How to completely turn off Bluetooth and Wireless

Hey everybody,
I'm running Windows XP SP3 via Boot Camp and I was wondering if anyone can assist me in how to completely turn off Bluetooth and Wireless connectivity so that I can reserve as much batter life while being in class taking notes without a plug-in source, but not uninstall. I know there is a Bluetooth control panel and I disabled it there but under "connect to" its still remains there. Basically I want to have the Bluetooth and Wireless turned off completely when I startup and still have the icons shown in the taskbar to let me know that they are still there.
Thanks!

Joergen Thomson, I can see that you have the same thoughts like I do, I wish they could release a software that is stable and better then this.
I dont have the energi or time to report all flaus back to cisco, this product have taking to much of my time and frustration already. Thank you so much for all the time you spend to try get this product stable and hopefully a good product.
I have a costumer that have a webservice that is IP restricted, For now I have to define more then 93 policys openening for the same service because this doesnt handle address list and groups. And all the times I had to set it back to factory default becasue of HTTP Admin server stopped, VPN Problem, Firmware Upgrades, "Packet Loss" and so on takes alot of time becasue I need to reconfig policies back.
For now to they release a firmware is stable I have take this piece off the network and put the back a old Fortinet 60 box.

LENOVO G400 TURN OFF AUTOMATICALLY AND NOT LOAD BIOS SETUP

i have a lenovo g400, once i turn on it only the lenovo name appears in the screen and then it turn off automatically and then turn on and turn off again and so on... also I was having problem that my Lenovo G400 laptop did not display Press F2 to Enter Setup during the boot process, and because of this, no amount of hammering the F2 button would allow access to the BIOS. I attempted all of the standard fixes, pulled the battery, held power down for 30 seconds, removed the HDD -- nothing would cause this to appear. i dont know whats the problem of my laptop..please help me to fix it..

hi PRAY2431,
Welcome to the Lenovo Forums.
Can you try to access the BIOS by pressing the OneKey Recovery button.
- Link to picture
If you manage toget in, try prssing F9 to reload factory defaults then press F10 to save and exit (this should reset the hardware configuration of the machine).
If you still can't get into the BIOS and the machine still turns off after POST (lenovo screen) then there's likely a hardware component that's failing. If you have a spare PC, try to create a Lenovo Bootable USB Diagnostics and boot from it by pressing F12.
Alternatively, you can contact Lenovo (for service) or contact one of the Lenovo Authorized Service centers below
Service Provider List (Philippines)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours it is driving me crazy as I had to stop all apps but still not helping

After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
and http://www.apple.com/support/ipod/service/battery/

I have downloaded MAMP for Mac and want to use it for working with Wordpress. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.

When I deleate an imessage my phone turns off FaceTime and imessage in settings. I have done everything nothing is working.

When I deleate an imessage my phone turns off FaceTime and imessage in settings. I have done everything nothing is working, HELP!

If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.

Can't 'turn off' HTTP listening port?

Hi,
Below is an exert from our config.xml file.
Currently our app, receives messages on port 7002 (HTTPS) and web browser requests
on port 7001 (HTTP).
But now we want all comms to be via HTTPS.
I can't seem to 'turn-off' the HTTP port.
Thanks
Brett

WebLogic unfortunately does not allow you to turn off the HTTP port. It's not
possible. What you should probably do is just make the HTTP port something so
ridiculous (like 23998 or something) that the chance of anyone ever figuring out what
it is, is slim to none.
Cheers,
Joe Jerry
Brett wrote:
Hi,
Below is an exert from our config.xml file.
Currently our app, receives messages on port 7002 (HTTPS) and web browser requests
on port 7001 (HTTP).
But now we want all comms to be via HTTPS.
I can't seem to 'turn-off' the HTTP port.
Thanks
Brett

Iphone 4 turns off randomly and unable to turn it on without charger

iphone 4 turns off randomly and unable to turn it on without connecting to charger or PC

Hey Tiffy6996!
I have an article here for you that describes this issue and can help you troubleshoot the issue a little further:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

I cannot change song order on playlist with highlight and drag. I have turned off shuffle and highlighted the far left column( up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4.

I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8 and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?

After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

Notifications for calls and text messages ONLY (turning off email and Facebook)

Anyone one know how I can be notified for only call and text messages - How I can turn off email and Facebook notifications only?

Does this help?
http://crackberry.com/blackberry-101-how-set-and-edit-your-sound-profiles
http://crackberry.com/blackberry-101-creating-and-editing-profiles-and-notifications
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Can't turn off iCloud and F'd up my Calendar

I have an iPhone with my Work calendar Synced with my work computer (outlook Calendar). Also, I have iMac 27" i5 with my Home calendar (iCal).   This has worked fine and separetly for the last 3years. My home calenders allow me to organise my life with payments and is very important. My work calendar, well that speaks for it's self.
I install iOS5 on iPhone and Lion on the iMac which unbekownence to me have iCloud syncing on and doing stuff that has totally corupted my iMac Home Calendar.
My home calendar has my work calander mixed in with my home calendar and reminders popup every few minutes that I have already dissmissed. They won't stop popping up. The same one over and over and they go back a month or more.
Additionally, when I try to add an event it sometimes puts it in very day instead of a monthly re-ocurring event and then it won't delete the event when I try to fix it.
I've tried to turn off iCloud, and it does all the right things and appears to turn off but then when I go back in it is on again.
The Work Calendar (Windows 7 Office 2010) doesn't show any symptoms and has kept working as it should on my work computer as on the iPhone. Neither appear to be effected
I've tried all the delete files and reinsralls but iCal seems to just get more confused. It renames calendars and is totally out of control to the point of no return.
I can't find any where which shows how to delete iCal and do a fresh install of iCal and not have iCloud sync.   I have searched Google for months and months with no joy.
What I need is to stop iCloud and **** it off permently as it appears to be a problem for how I use my apps. I do not want to use iCloud for calander or anything just yet.   I need to get my original .ics backup in iCal that I have and working on it's own and with out the cloud or syncing.
Help anyone ...
P.S.   I have only one profile, Admin.
          I've tried another profile and it replicates and operated worse than the Admin account with iCal.
          Also I have time machine back to August 2011. I've tried all the Google fixes and none have worked

Hmmm!
Sorry for taking so long to get back. But the thing was none of the instruction where able to get the iCloud turned off. If anything it is for someone who moves between the Local and the iCloud than turnng off iCloud.
I want to turn off iCloud syncing in my System Preference and iCal. iCal is syncing with iCloud and I do not want that. My iPhone is syncing with iCloud and I don't want that either. I never enabled these options and had to find out where they were before I could even start trying to turning them off.
My iPads do not I’m unsure why
Is it possible to un-sync and turn off all iCloud activities on my iMac with Lion 10.7.3?
I think I made up a word (Un-Sync) to re-turn back to the original state before the first sync

Turn off service and port

Similar Messages

Maybe you are looking for