Turn Off Slide Duration Web Gallery Output

I am using CS5 Bridge, I would like to turn off the slide duration feature on the web gallery output.  The box requires a value.
If the product will only produce web gallery output with a slide duration is there a way to hack the html output and remove it manually?
What is your opinion of installing the legacy web gallery plug in.

Dan:
You can temporarily disconnect from the internet, unplug the modem to computer cable. If you're wirelessly connected then turn off the Airport on the Mac, not the base station.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • Turning off info in web gallery

    Is there a way to make the photo info unavailable in a web gallery? I don't want my site's visitors to have access to my photos' metadata. Thanks.

    sixtyorb:
    Welcome to the Apple Discussions. No there is no way to turn it off. The web gallery is run by server side software and we're not able to make any changes. You could strip all the metadata off the files before adding to the gallery.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Ipod Touch - turn off slider appears on startup and ipod won't play music

    Hoping someone can shed some light on my problem.
    The two problems I have are:
    1) the red Turn Off slider appears immediately on turning the iPod on
    2) when the play button is hit, it automatically pauses immediately.
    The problems in detail:
    I have a 2nd generation iPod touch that was working fine until I updated to 3.1.2 firmware. It worked fine for a few hours and then the touch screen began behaving weirdly. First, it wouldn't allow me to slide the unlock slider across the screen, and then when it finally would let me, it basically accessed random apps and moved randomly between the app home screens. All of this was jerky and erratic and it looked as if my iPod had gone schizo!
    I took the iPod to a Genius at the Apple Store, but when I arrived the problem had fixed itself (at least, the random accessing of apps etc), but I noticed that on startup, the red turn off slider would appear immediately. After canceling the slider, I went to play some music. Immediately after hitting play, the ipod paused. Repeated attempts yielded the same results. It won't let me press play or listen to any music, regardless of whether it was iTunes purchased, an audiobook, podcast or whatever. You hit the play button, it turns into a pause button for a split second and then reverts back.
    I have tried restoring the iPod a number of times on my computer and other macs (I'm running 10.5.8 OS X and iTunes 9). I have also done a couple of option+restores, having downloaded previous firmware versions (3.0 first, then 2.2.1). Both attempts left me with an error message (20). I am going spare about this and would really appreciate any advice!
    There is one thing that worries me. I have been told by the Genius I spoke with that the moisture indicator inside the headphone jack shows that it has been exposed to water. Would this result in the above described problems? Everything else seems to work fine. I have even managed to get YouTube back after fiddling with the date settings (i.e. setting the date to 2030 and then back). I want to either restore my iPod to a previous firmware version that worked or make the update that I paid for work the way it should!
    I appreciate any suggestions!

    this happened to me. I figgered that after you play apps like games which r side ways causes this for example nba live lite it caused the problem to me same when the slider stays in one spot i see that apps cause this problem. i just figgered it out cause it happens allways after certian game apps or other app. To fix this test all the apps and see and delete the ones which cause this but not all apps which r side ways cause it. I hope this helps

  • Ipod touch screen went black and then started flashing. Then the turn off slide comes up.

    Ipod touch screen went black and then started flashing. Then the turn off slide comes up. Restored multiple times and didn't work. Ipod works with Itunes fine (can put music and podcasts on the ipod), but can't take songs off of the ipod. Using windows xp and everything is up to date. Any ideas of how to fix it?

    I didn't know that it was posted three times. My computer didn't say that it posted anything.
    My ipod still syncs to itunes and I can put podcasts and music on my ipod, but I can't delete songs after I put them on the ipod. When I try to delete songs I try to delete it from the main music list on the ipod. It's also doing all the other stuff that I posted before. The screen will go black and then the power off slider thing shows up for a few seconds, then it'll show the unlock slider bar. Then goes black again. It will also do that when I have the ipod unocked and changing songs or playing a game. I've restored it to the factory default/new ipod and it still does the same thing. I've uninstalled and reinstalled itunes and then restored it again to the factory default and it's still doing the same exact thing. I checked and my computer is up to date.

  • How to Edit Web Gallery Output from CS5?

    Hello!  I just upgraded from Photoshop CS3 to CS5.  (Got some scrambling to do to catch up!)  I had been using the old File>Automate>Web Photo Gallery to create galleries for my Web site.  Massaged a little in Dreamweaver MX (I know, I know...) they look something like this:
    http://www.techno-imaging.com/gal10spring/alden_b2/index.html
    I found out how to add the old Web Photo Gallery back into Photoshop CS5, but was curious to find out what Bridge CS5 would do with Output>Web Gallery.  I experimented with the Standard template and was mostly happy with the result.  Here's what I got:
    http://www.techno-imaging.com/gal10spring/alden_b2_test1/index.html
    Trouble is I'd like to be able to customize the output a little more than allowed within the template itself.  It looks like the output has Flash, JavaScript, XML, HTML and maybe other programming resources.  I'm fairly familiar with HTML 3 and CSS, but am not a programmer.  Can anybody recommend what high-level editing tools (example: Microsoft Word for fancy text editing) I could use to make some modest tweaks?  The default modules are fine, but I'd at least like to be able to add a link back to my main gallery page like you see at the top right of my old Web Photo Gallery pages.
    Also- are there 3rd party templates for Bridge CS5 Web Gallery?
    Thanks, - Dave

    Hi i7nvd
    Oh my, I missed that completely!  Thanks very much for bringing that to my attention.  In the meantime I found that ACDSee would do a Web gallery that works OK for me.  However I will go back to Bridge Output Web Gallery this afternoon and five it a whirl.  Again, many thanks for jumping in and pointing that out to me.  I appreciate it a lot!
    BTW, thanks for the link to your site built with the Bridge plug-in.  And congratulations on the wedding!
    - Dave

  • File name font (web gallery output)

    I am using CS4 with adobe bridge.  I have created some web galleries and have selected the option to show the file name.  This shows up just below the picture in the gallery.  The problem is the font is too light to show up against my chosen background font.  I am wondering how to change the font color of this file name for the output web gallery.  If anyone knows how to do this, I would greatly appreciate it!!!  Thanks!

    Hi,
    You can change the font colour in the Output Panel, under Color Palette (the order it appears and the options it shows depends on the template you are using). Simply double click the colour swatch sqaure to open up the colour picker and choose a new colour.
    See attached screenshot if you are unsure where to look..
    Regards..

  • I have to turn off ZOne ALarm web security for Firefox to open properly

    I have Firefox 5.0 and Zone Alarm Extreme Security (10.0.246.000). When I open Firefox I get the welcome screen, as if I have just downloaded Firefox (no home page and no bookmarks - options are set at default). So, I close the browser and disable Zone Alarm Web Security and reopen Firefox. My home page and bookmarks load properly, options as previously set. I turn on ZA Web Security and all is fine until I close Firefox - then I have to do this all over again.

    P.S. This copy of a post by BadK_FFox (from last week) may also help:
    https://support.mozilla.com/en-US/questions/840168<br>
    Firefox 5 will not start with Zone Alarm Ver 10.0.240.000<br>
    '''Quote:'''
    I'm running Win7 x64 with ZoneAlarm Extreme Security 10.0.241.000
    I had the same problem with Firefox 4. After turning off ForceField Toolbar, it started working fine.
    Then I updated to Firefox 5 and it wouldn't start, instead it was showing an error message from ZA...
    I searched mozilla support and followed the instructions here: http://kb.mozillazine.org/Browser_will_not_start_up on the topic"Firefox does not start after updating with ZoneAlarm ForceField enabled".
    The correct instructions for this ZA version should be: "Internet -> Web Security -> Settings, and click Clear Virtual Data"
    After that I could open Firefox again! Then I realized it was still version 4... I installed the update, and everything went smooth. Checked again if Forcefield toolbar was inactive (it was) and opened a few pages, closed Firefox and opened again. After a while it wouldn't open...
    AGAIN the "Clear Virtual Data" did the trick...
    This time I clicked on Settings (next to "Clear Virtual Data") -> Advanced Settings, and turned off "Enable Virtualization".
    Until ZA get a fix for this, either we turn it off or clear virtual data every few moves...

  • How to turn off email and web site links?

    I'm making my own letterhead template for my massage business.
    I want to turn off the automatic linking to my email address and web site which are both included on my letterhead. It's just annoying that every time I accidentally click on either of those I'm taken to my web site or my computer is trying to email me!
    I only snail mail my letterhead and have no use for the linking. I can change the type format so it looks like the rest of the letterhead, but I can't turn off the linking.
    Paul

    There is an option under Preferences > Auto-Correction to "Automatically detect email and web addresses." You want that one unchecked. There is also a link inspector, second from the right, with options to enable hyperlinks or make all hyperlinks inactive. Seems contradictory to me & I've found that if a document already has some linked text, changing these preferences doesn't change the existing links. And, if you paste in something with a link the link will still be active.

  • Turning off encryption for Web Client?

    All,
    The documentation for the Developer Server states that all
    traffic between the Forms Web Client and Forms Server is
    encrypted, but that it can be turned off.
    Unfortunately, nowhere I can locate does it state how to
    turn it off.
    Can someone tell me how to turn off encryption between the
    Forms Web Client and the Forms Server?
    Thanks for your help,
    --dave;
    null

    Most of the time the image drops in on points for the position and anchor values. If I change the value of the position or anchor to a whole number it is fine and looks like it should.
    This is the behavior of After Effects.  Since it deals primarily with bitmap foogate -- which can have either an even or odd vertical dimension -- the anchor point will most frequently be either a whole number for footage with an even vertical dimension, or X.5 for footage with an odd vertical dimension.  This is normal behavior: AE tries to find the center point of the footage to establish the anchor point.
    In the grand scheme of things, will the client actually notice that 1 pixel of vertical resolution is missing if you animate the result?

  • My iPod touch won't turn off. I tried and the turn off slide button in stuck in the of position, but it's still not turning off. It's been a few days please help!!!!

    My white 4th generation iPod touchs turn of slide button is stuck on off but my iPod won't turn off for some reason and it only shuts off when the battery dies. It's been stuck like this for some time. Please please please help!!!!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Adding music to slide show WEB GALLERY

    I have added pics to web gallery, now i want music added when others are viewing.

    Welcome to the Apple Discussions.
    How did you make this gallery? Are you talking about a .Mac Gallery? These are only supported on v7 (iLife 08) and you'r posting in the v6 forum.
    Regards
    TD

  • Bridge Web Gallery Output Problems

    I have just set up a new MacPro.
    I have downloaded and Activitated Bridge & Photoshop CC
    However I can't create a web gallery, I get two error messages...
    When I try to save a Web Gallery I get "save location does not exist"
    If I try to preview in browser I get "Target folder cannot be created"
    If I try to create a PDF I get "there is insufficient disc space to complete this operation"
    However if I sign in on my old MacPro everything works as normal.
    Any help anyone?
    Peter

    Update...
    After searching the internet I have found a bizarre solution.
    I had done a clean install on my new MacPro and downloaded Photoshop CC 2014 and Bridge CC (wanted a clean new machine)
    On my old MacPro I had Photoshop CC 2014 and Bridge CC plus Photoshop CC
    I just copied Photoshop CC from old machine - opened it - closed it - and NOW Bridge CC is creating web galleries and PDFs
    Please Adobe do something about this!
    Peter

  • How do I turn off skype for web (beta) when I log-in to my outlook email

    I've noticed in the past couple of days that when I log-in to my outlook email page that it shows the new 'skype for web (beta) icon at the top right of the messenger pane instead of the old message link.  How do I  turn this off and go back to the old version as I don't like the new skype for web and much prefer the old style message pane?  I have noted that when I open my People page or OneDrive page that the old version still shows there, so why can't I turn it off in my email page and go back to the original pane? I would appreciate some help and advice on this.  Thanks.

    Hi Claudius,, Thanks for replying.  You asked what I preferred about the old message pane.  I just preferred how it looked.  You could see automatically from your contact list who was online as the call/video icons showed clearly beside their name and if you simply wanted to send an IM, you just selected the contact and the IM box would appear at the bottom.  I just don't like how the new skype for web looks at the side of your Outlook email page as I don't like the layout.  I know it all comes down to personal preference and mine is for the old version.  I don't understand why they have to keep making changes to things.  The way I see it is, if something isn't broke, why break it?  The old version worked perfectly well and I preferred it but we, the users, don't get a say in anything because the people who make these decisions just go ahead and change things no matter what. Thanks for clearing this up for me.  I had hoped you could just turn it off and revert back to the old message pane but you say this isn't possible which is unfortunate. Regards, Linda  

  • Sharpening for web gallery output?

    I'm just wondering what you all do to sharpen your images for output to web galleries, since LR doesn't offer this as a possibility.
    I guess one way would be to open the images from the gallery folder and do a batch process in Photoshop. But I'm curious to know if there's a simpler or more efficient way to go about it.

    [email protected] schrieb:
    > I also often post images larger than 800x800 that need a bit more
    > sharpening. Herb, would you be willing to share a bit more about
    > droplets and how you integrate them with your LR workflow?
    In PS, using "Droplets" one can generate operating system level
    executables. They provide a mean to hand image files over to "actions"
    (macros) recorded in PS.
    In order to create an "export action" for LR, one would roughly do the
    following:
    - In PS, record an action which does the following:
    * Apply USM with suitable parameters (like radius 0.9, amount 30,
    treshold 3) to an image already opened in PS.
    * Save for web/save as JPEG (target folder will be hardcoded and thus
    fixed).
    * Close image without saving changes.
    - In PS, select File / Automate / Droplet and create a new droplet
    * Choose an executable file name
    * select the previously recorded action
    * choose target: none (Since we already saved files to JPEG)
    - Put the generated executable or a shortcut/link to it into LR's
    "export action" folder.
    For export with output sharpen, in LR:
    - File / Export
    - Choose some target folder (will be fixed; for temporary image files)
    - file format: PSD or TIFF
    - color space: sRGB (for web export)
    - maximum size: target size as needed, e.G. 1280x1024 for SXGA files
    - export action: select the previously created droplet
    Save these settings as a new export preset (like "SXGA").
    From now on, one would just need to export using that preset. LR would
    render already resized PSD files, start PS, batch sharpen them and save
    JPEG files to the directory chosen while recording the PS action.
    Herb

  • Web gallery output and flash

    is flash the only output for web galleries?

    Actually, I've now tried it on a number of templates for web output, and none of them actually show the text or link for the email link or web address - it's not showing up in the template or final output.
    Also, is there a way (not too hard!) to place a 'back' button or a url address somewhere in a template? If I knew the actual text to place, I could >perhaps< copy it in somewhere...
    Thanks
    Laurence Bartone
    Check:
    http://bartonephotography.com/Weddings/
    That's a link, using the flash gallery - but I'll probably change it soon to a varient on 'blue sky'.

Maybe you are looking for