Turn Off Snap to Grid

I accidentally turned on "Snap to Grid." Now I can't get it
to turn off.
Clicking F5 does nothing, trying to turn it off in the view
menu does
nothing. Any suggestions?

I got it fixed. I remembered seeing this before and having to
add another
keyboard shortcut to the menu item. When I found I had
already done that,
then I used that shortcut and it turned it off.

Similar Messages

  • How do you turn off snap to grid in Logic Pro x

    Hi
    How do you turn off snap to grid as in garageband .....it was quite simple...
    But I don't seem to get to grips with this in logic ....
    I have options of smart ...and so on ....
    I want to be able to move eg an imported audio file to start wherever I want so not to snap to the nearest beat or bar...
    Anyone know??
    Thanks

    Technically you cannot turn it off, but you can choose a very fine resolution which in effect boils down to having it off: ticks. For accurately lining up audio you can use Samples (the smallest snap value, probably equates to GB's off setting?).
    I have F5 to F8 assigned to snap values bar, beat, division and tick. Very handy.
    The Frames values obviously come in handy when working to video, though there's no law agaist using it without video.
    Note that they are ordered from big to smallest.

  • Can I increase max resolution or turn off snap to grid?

    I was wondering if someone could help me with an audio editing problem/question. I'm trying to cut audio at 0 on the waveform and I'm not able to cut exactly where I want to. I've zoomed in all the way and pressed control.shift, which, I guess, incresses the resolution to the maximum (ticks). I find that the cut line is still moving in rather large jumps and I'm not able to cut where I would like (at 0 on the waveform). Is there a way to turn off the snap and increase the resolution even more?

    try holding only ctrl instead of ctrl-shift,which doesn't do anything in arrange if i remember well(use that in the matrix)
    on the top right of the arrange you can choose the snap setting

  • Turn off "snap to grid" in Adobe Acrobat Pro XI

    Whenever I create a text box in a PDF or a form field in form editing; the text box/form field 'snaps' to an unseen grid and I cannot place the box/field where I want it. Any thoughts on how to turn this off?

    Yeah, I finally figured it out…it was SO easy! I feel a little silly now.

  • How do you turn off the auto grid?

    How do you turn off the auto grid? I read in a forum that the solution is "View- show- turn off grid". But the weird thing is I had to have that website open to even get the alternative up under "View". If I didn´t, there were other alternatives there. Why?
    The second problem is, when I finally got the "Turn off auto grid" alternative up, it will not be unchecked…. I´m working on a mac.
    Thank you in advance!
    Jeanette

    View > Snap To > None.
    Nancy O.

  • Problem turning off snap to guide MX11.0.2

    I am using FreehandMX 11.0.2 on a Mac G5 OS10.4.10 - I can no
    longer use the view menu to show/hide guides, lock or turn off
    snap. I can use the layers menu to show/hide or lock but cannot
    turn off snap. I also cannot delete the Guide layer from the layers
    menu. I have tried changing keyboard shortcut, deleting preference
    file from settings folder but nothing works.

    Willem,
    I don't use the F-keys in combination with modifier keys.
    Opt-F1 through
    Opt-F8 are used by the system. Check in System
    Preferences>Keyboard &
    Mouse>Keyboard Shortcuts. Mac OS uses F9 through F12 for
    the Dock, Exposé
    and Dashboard.
    If you never use certain system shortcuts, you could disable
    them in System
    Prefs and thereby free them up for use in FreeHand. I have
    disabled the Mac
    OS Spotlight shortcuts because they conflict with the
    magnifier tools in FH
    and Photoshop.
    Here's what I use in FreeHand (US English keyboard layout):
    Grid>Show___F6
    Grid>Snap___F7
    Guides>Show___Opt+Cmd+;(semicolon)
    Guides>Snap___F8
    Make sure when setting shortcuts in FH, you check "Go to
    conflict on assign"
    to make sure you haven't used the same shortcut twice.
    If you use a non-English keyboard layout, you might be seeing
    different
    results.
    If you're using Entourage 2004 11.0, make sure to update to a
    current
    version, because there's a known conflict with keyboard
    shortcuts in Adobe
    apps there.
    Judy Arndt

  • Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.

    There is no specific function that turns FGL on or off.
    When you say that it has stopped, do you mean that the handles no longer show?
    If that is the case, then I think you may have modified the CSS to such an extent that Dreamweaver no longer recognises it as belonging to FGL.
    There are a couple of avenues for you
    Redo the site and make sure not to touch the FGL CSS
    paste the code here so that we can see what has gone wrong.

  • Turning off "Snap to" feature in Illustrator?

    Hi! I am creating vectorbased icons in Illustrator and have set up a document with size 16x16 pixels to get a good preview of the end result. My problem is that the anchorpoints snap to the edge of the document even though I have turned of all the 'snap to' options I can find in the View menu and the tranform flyout menu. I would be very thankful for some help to solve this.  /David 

    JETalmage wrote:
    You can't turn off snapping to the Artboard bounds.
    JET
    That's really unacceptable.

  • Can I turn off snapping to vertical and horizontal?

    i need to make a line that's not quite horizontal, but when it try to use the ruler to make it, it always snaps to horizontal. This should be a feature that can be disabled, is it possible?

    Unfortunately, the snapping behavior is not something that can be turned off in the current release. We have heard this feature request once or twice before, but I can't say when having an option to turn off snapping will make it into a future release.
    Frank
    Draw Engineering

  • Turn off Snaps in Motion 5 when using the Edit Points tool and Beziers

    I drew a bunch of Bezier lines and am now going through my animation and fine tuning thier locations using the "Edit Points" tool. Is there a way to turn off the snapping function within the edit points tool?
    Matt

    With snapping on and dragging around points or control points in Edit points, you can temporarily disable the snapping action by holding down the command key.

  • Turning off "snap" option in Logic 8?

    I'm brand new to Logic, making the switch over from Audition, which was the sole purpose that I owned a PC for the past 3 years in addition to my mac.
    I'm still trying to get a feel for it. I was wondering...is there any way to completely turn off the snapping option, so I can move my audio files freely?
    Thank you much!!

    Open Global Preferences> Editing ... Turn off the option for *Limit Dragging to One Direction"

  • Pen tool - turn off SNAP-TO points

    Hello -- I'm running Illustrator CS3 on a Mac Powerbook. Somehow I've got some sort of "snap-to" feature turned on for the PEN TOOL, and I can't figure out where to tun it OFF.
    It's the constraint aspect that is unwanted (the symptoms are: the cursor constantly displays "tool tip" info about all sorts of existing nearby anchor points, various constraint angles, etc -- which is OK as info, but it also keeps snapping to these points in the image when I create a new anchor point, rather than letting me just click wherever I want).
    I want to reset to the DEFAULT behavior for creating arbitrary anchor points. This forced "snap-to" business is driving me nuts -- and I can't find where to turn this feature OFF. Someone point me in the right direction please.
    Thanks -- Robin

    Thanks -- good info from both Kurt and Wade -- I appreciate the help. I suspected that there was some menu item for this (probably "hidden in plain sight"), but I just couldn't find it.
    Adobe HELP didn't seem to have this topic for the keyword "pen tool", which also surprised me.
    I bet the SMART GUIDES are very helpful under certain circumstances -- but they were creating huge problems for what I was doing.
    Thanks again -- Robin

  • Turning off the snap-to-grid in Pages

    How do I turn off the snap-to-grid Pages feature when I want to place an object precisely?

    I recall reading somewhere that you have to have the grid on before the option to turn off snap to grid is available. (Older versions like PSE2 and PSE3 do not require the grid to be on to turn snap to grid off. I'm not sure which version of Elements started this change in behavior.)
    Pressing the ctrl key should temporarily disable the snapping feature.

  • Livecycle designer - snap to grid

    Hi,
    I need to set different distance between dots in grid in Adobe Livecycle designer, or what is the best approach to create nicely aligned forms?
    Many thanks for reply
    Best Regards Jiri

    Hi,
    thanks for your solution, but I have this problem:
    I have two fields on one line (Text and Text Field - I need different background) and now I need to set height of both. If the grid dots are too distanced I have to turn off Snap to grid feature of editor and size height of field manually, but this approach is not precise.
    Many thanks for solution.
    Regards Jiri

  • How do you disable snap to grid?

    This featured was listed as being added with the update to version 1.4, but I cannot find how to turn it off.  I have looked all through the app, and the separate Settings app, but I haven't been able to find the option anywhere or any updated documentation that describes where the option is.  Does anyone know where it is; maybe I am overlooking something obvious.  Thanks.

    This is the label that will be displayed in the TImeline once you are zoomed in all the way to indicate the new snap status. BTW affects also the manually moving of the Playhead.
    This is the article on Apple's website that explains the details
    http://support.apple.com/kb/HT5670?viewlocale=en_US&locale=en_US
    To turn off "Snap to Grid," pinch-zoom to the maximum level in Tracks view or when editing notes in regions. Pinch-zoom again and "Snap to Grid off" will appear on top of the Tracks area.To turn "Snap to Grid" back on, pinch-zoom out.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Maybe you are looking for

  • Difference between Object equals() method and ==

    Hi, Any one help me to clarify my confusion. stud s=new stud(); stud s1=new stud(); System.out.println("Equals======>"+s.equals(s1)); System.out.println("== --------->"+(s==s1)); Result: Equals ======> false == ------------> false Can you please expl

  • GOS Attachments Display URL in WD ABAP

    HI,   We have to display the GOS attachments list in the the WD ABAP application. Unfortunately the class and Function module which can do that are not working in the WD ABAP application. Like CL_GOS_DOCUMENT_SERVICE...   Any thoughts? Thanks Raghav

  • Entitlement Setting in 4.0 Portal Tools Keeps Blowing Up

    When we try to create an empty WLCS database (empty except for the required data), run an EBCC sync (to get all of the configuration files into the database, and then try to set page entitlements we get an exception. Any help would be appreciated as

  • FileExtract - Can anyone spot the deliberate mistake please?

    Basically, the program includes my add-in along with SAPbouiCOM.dll both embedded. The code below now extracts SAPbouiCOM.dll perfectly, but my program is condensed to 1Kb!!! I bet there's something obvious here, but I just can't spot it! Private Sub

  • Green colour cast using Cinema DNGs

    Hello I'm shooting RAW with 5D3 and then convertiing to CDNG. When viewing the footage in Speedgrade I get a huge green colour cast. See example image: http://i.imgur.com/zQnziZT.jpg I get this for every CDNG I shoot and even sample CDNGs obtained fr