Turn off Snaps in Motion 5 when using the Edit Points tool and Beziers

I drew a bunch of Bezier lines and am now going through my animation and fine tuning thier locations using the "Edit Points" tool. Is there a way to turn off the snapping function within the edit points tool?
Matt

With snapping on and dragging around points or control points in Edit points, you can temporarily disable the snapping action by holding down the command key.

Similar Messages

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

How to turn OFF trackpad on MacBook Air when using Magic Trackpad

How to turn OFF trackpad on MacBook Air when using Magic Trackpad. Anyone have a clue on how to do this?

Do you get more than one trackpad in system preferences? If not, which trackpad does it show in the "movie" in Preferences?

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

When using the smart brush tool, my image gets distorted. Is there anyway to fix this?

When using the smart brush tool, my image gets distorted. Is there anyway to fix this?

What preset have you selected?
Can you post a screenshot showing the distortion.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Cursor leaves when using the spot removal tool

the cursor leaves when using the spot removal tool if i drag it to the right. how do i find it again?

Below the image, to the left is the <Tool Overlay> feature. Click on the double-triangle and select <Always>. If you have it set to <Auto> it disappears when you leave the image area.
See screen shot:
If you don't see the <Tool Overlay> press letter T on your keyboard to make the toolbar visible.

When using the spot removal tool, the sampled area is not showing. I fully remember that I am seeing this before--I already had updates of my LR5

When using the spot removal tool, the sampled area is not showing. I fully remember that I am seeing this before--I already had updates of my LR5
Is this just a setting?

Thank you! I feel so stupid -- I did search the internet--maybe not hard enough.

New feature: pressing alt while using the anchor point tool

Hello,
New feature doesn't work at my side ==> pressing alt while using the anchor point tool would allow to pair the handles again while dragging a handle. But if i press alt or if i do not press it, it does not change the working of my anchor point tool or handles. When i press alt i see the little sign apearing next to my cursor and that's all. Someone an idea what could be the problem?
Thank you for your help.
Tommy

thank you!!!!! I clicked and dragged before..didn't understood apparently the function of the new feature for 100% ;-)

Png blurry/pixelated after i used the vanishing point filter and save as a VSP file?

Hi,
Why are my png blurry/pixelated after i used the vanishing point filter and save as a VSP file? And i'm using a high res picture. I'm using PS CC.
I got some screenshots.
This the result of the png
Thanx in advance

As I posted before, I would use it more if it had some of the functionality I need. I need to be able to change the opacity of the image I'm pasting so I can see EXACTLY where my overlaid image will register with the bottom image. VP seems to require a ton of processing and I wonder if maybe the software is handing off some of this work to the graphics card for calculating. Maybe this would explain that apparently not many people have run into an error that gets embedded in the file. Although my G5 is Apple stock, not super-modified.
craig

I would like cut out an object using the quick select tool and drop the object into another picture. Can anyone help

I am using background pictures and want to cut out objects from other jpegs using the quick select tool and drop them into the background picture. So if i have a banana and select the object i need to copy the banana into the other background.
Hope this makes sense.
Gary

Select banana. Right click>layer via copy. Move tool. Click and drag to other file. Drop on image.
OR: load the background and banana in one stack (File>Scripts>Load File Into Stack). Select banana and layer via copy or create layer mask.
Benjamin

Return key not creating a new line when using the horizontal text tool

Going through the adobe after effects 'classroom in a book' examples - when writing a line of single line using the horizontal text tool pressing return does not create the next line underneath, the cursor stays on the same line?
Anybody out there had this problem?

Hi Bill
Thanks for replying!
My OS is windows 7. I think it is the first time I have needed to put more than one line of text in an after effects layer. I am new to CS5.5 - after effects and I'm going through an adobe tutorial 'classroom in a book' series book.
I thought about using a paragraph text box as you suggest but could not find the function in the tools menu.
I have since tried clearing the cache out and restoring default layout but with no joy.
I have used the return key for multiple line text in premier pro and it works perfectly ok.
Cheers,
Alan

When using the refine edge tool, my image is opposite....rather than the background being transparent...the "subject" is gone...do I have a something set incorrectly?

I used the quick selection tool to outline, then refine edge....
my image does not shoe up in the refine edge window....it is a "mask"..
then when I output to "new layer with layer mask"....my "subject" t is gone...back ground remains...

Thanks for your prompt reply!
this is how the "finished" product looks...this is the image after I select "output to mask"..
It seems "reversed"?

5.5 Crashes when using the pin puppet tool

Hopefully somebody can help me. Every time I try to use the pin puppet tool, I get the same error message:
After Effects error: Crash in progress. Last logged message was <7320> <DynamicLink> <5> 000000001B5098D0
Folloed by a message apologizing for the error and a last chance to save the project (which sometimes saves a blank project).
I wasn't using any large images or doing anything to overload it. Help, please?

Thanks for replying Todd. I do submit every crash report. I have been trying to re-enact my crashing problems and I have only slightly narrowed it down.
I have noticed that the puppet pin tool only crashes my large projects (Illustrator file @ 3840x2160res fit into an AE comp of 1920x1080res with 30+ layers). My projects here at work deal with short animations, but I have made my comp size large so that I can pan around my scenes. I'm only using the puppet pin tool on 1 or 2 layers, but I feel that the program just freaks out because I have so many layers in my shots.
After AE crashes and I reopen it, I don't have a problem with the puppet tool again.

In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

I don't quite know how to use the clone stamp tool in the Photoshop 2014 version. When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct. How do you lock it down to keep it from moving?

Hi Smoothery4501,
The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
Please refer to below blog for further info
Clone Stamp Tool « Julieanne Kost's Blog
Thanks

TS1367 My MacBook Pro when in sleep mode display turns black unable to wake. When using the mouse it goes across screen like using an eraser and finding the middle of screen to get to the password area to turn back on.

really have a hard time when leaving the computer on when attending other matters in the house. When returning, the screen is completely black and unable to wake(?) by touching the mouse or touch pad to put my password and be able to use the computer. When I move the mouse pad looks like I am using the eraser like in photoshop and it clears the screen little by little. Now I am able to point to the middle of the screen and erase the area where the password is in order to get to the screen and use the computer again. Anyone else having this problem? Took the laptop to the apple store near home and they told me there is nothing that can be done and I have to wait untile the new operating system, Mountain Lion comes out and supposedly this will fix the problem. HELP!!!!

I was so frustrated I call the Apple Tech Support and they walked me through. It has been doing great. The screen still turns black but now, when I touch the mouse or touch pad, I get the password prompt. The Apple Store did not help but talking the the Apple Tech has helped a lot. Thank you.

Turn off Snaps in Motion 5 when using the Edit Points tool and Beziers

Similar Messages

Maybe you are looking for