Turn off startup sound and red led.

Hey,
i need to turn off my vado startup sound, how to i do that?
Also, i dont want my red led to light up when i am filming. Help needed with that on also.
Thanks.

Turn "Instant Record" on in the setting by pressing the Play/Pause and Delete buttons at the same time. When it comes out of sleep mode it doesn't make a sound.
Being able to turn off the display while recording would also be useful or at least be able to dim it. I've disturbed some people while recording a play in a dark theatre. And I know it bothers me when someone is playing with there cell phone or other device in a low light situation.

Similar Messages

  • Is it possible to turn off the sound and just vibrate for incoming email?

    Is it possible to turn off the sound on my Verizon iPhone 4 and just have it vibrate for incoming email. Can't seem to find any way to do this!

    You could either flip the mute switch or go to Settings > Sounds > New Mail = Off

  • How do I turn off startup sound?

    Every computer I ever had, the first thing I do is to turn off the startup sound because it is very annoying in a public place and sometimes in a quiet place. I have not been able to find out how to trun it off on my Air. I asked the guys at the stores and they just say you can't. That is really dumb. I turned off my speaker but that is not a practical way because I may not remember to turn it off when I shut down.
    The question is how do I turn it off permenantly.
    Love to know.
    Thanks.
    Glenn

    NONE OF THE ABOVE WORKS FOR ME!
    imac/Mac OS X Lion 10.7.5
    I find this great solution...
    <This is a Direct Download Link>
    MuteCon for Mac OS
    or go to http://homepage1.nifty.com/macbs/download.htm#MuteCon
    mutec202.dmg(90.3KB)(recent version)
    is a japanese site but the app is in english.
    this app mute the sound before exit and demute after boot.
    works with Lion/snow leopard/ Mointain Lion
    set the preferences like this
    and add to Admin User acount to launch on startup.
    So easy...I can not believe I lost so much time.
    Help to spread the word!!!
    <Edited By Host>

  • Turn off startup Sound?

    does anybody here know some way to turn off the startup sound using a method that is not haardous (such as deleting the sound).
    any help would be appriciated
    Xelapond

    Hi Xelapond,
    use this: StartupSound.prefPane.
    If this answered your question please consider granting some stars: Why reward points?

  • Turning off startup sound?

    Is there a way to turn off the long tone that macs make when they turn on?

    In addition to V.K's suggestion, you can put your MacBook to sleep by closing the lid, instead of shutting down. Waking from sleep makes no startup sound. The only time a MacBook needs to be shut down is to remove the battery.

  • How to turn off startup sound on iMac desktop ?

    can anybody tell me how to turn off the annoying sound on startup with the Imac ?
    i cannot find it anywhere in the setup.
    thanks for yor feedback
    Marco3991

    Hello:
    Mute your computer before you shut it down.
    Incidentally, that "annoying sound" is an audible notification that the Mac has successfully performed self-tests on startup.  If you get anything other than a single chime, you have trouble.
    Barry

  • How to turn off startup sound

    The startup sound is not necessary; most applications do not have one
    Especially when my speakers are up higher than I realized, this can become a problem.
    It would be nice if it were just taken out of future versions of Skype (or disabled by default), but I'm hoping that for now there is at least an option/means to disable it?
    Solved!
    Go to Solution.

    Do you mean the sound it makes when you log into Skype? If you go into Skype preferences (just press "Cmd - ," if you can't find it) under "Notifications", and then under "Details", when the dropdown menu next to "Event:" says "When I sign in", you can uncheck the tickbox next to "Play sound". Hope it helps.

  • Can u help me can't get my sound back tried turn off checking sound and leaving off for 8 hours can u help

    can u help me get sound back used earphone tried turning off for 8 hours check to see it's noy munted

    Hi there phyllisbailey,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    -Griff W. 

  • I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

    I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • HT1338 my mac just speaking and telling me what I do . i don't know how I turn off this sound, i think it just for blind persons .

    my mac just speaking and telling me what I do . i don't know how I turn off this sound, i think it just for blind persons .

     > System Preferences > Accessibility (or Universal Access for earlier versions of OS X) > VoiceOver.
    Turn it off.

  • Turn off the sound for a while, and cannot turn it on (louder) anymore

    I have a Java application which plays sound (beep). After I turn off the sound using sound control key (lower) on the key board for a while, I will not bring the sound back using the sound control key (louder).
    Whenever this happened, my application's CPU usage is above 100%. I am not sure the sound issue caused by my application or by Intel computer itself. I don't have this problem with PowerPC computer.
    Ajia

    That is the sound that all IOS devices make when you swipe to Unlock and turn them off using the Power button. Is that what you are referring to?
    Cheers,
    GB

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

    The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
    No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
    03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
    03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
    03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
    03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
    03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
    03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
    03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
    03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

    Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

Maybe you are looking for

  • Extract of gr processing time in open purchase order

    to display gr processing time in open purchase order .give me query for extract the gr processing time which table and which field we have to take

  • Creating Context Sensitive Webhelp Using Robohelp 9

    I want to create a Context sensitive Webhelp - one help topic for one page/function for web application. I'm using Robohelp 9 with Team Foundation Server 2012. I also have MSSCCI provider installed. I will be using unique ID (Map ID) or unique window

  • Event creation

    I posted this thread on the abap general-forum, but they told me to put it here : Hi everyone, I'm a bit stuck with the events of a bor-object. I'm new to workflows and I have to extend the WF for mm Invoices. So I created a new BOR-object wit bus208

  • Illustrator Duplicated Tons of Layers

    I had a problem today working with a file and I was wondering if someone out there has had the same problem, and what I did wrong. I tried to delete an object and come to find out there were SO many identical duplicate layers underneath it. It wasn't

  • Old PO's to rebate

    Hi, We need to consider the old PO's that was created before the rebate agreement validity period for particular vendors. After creating agreement , the rebate condition occurs in new PO's but we need to get rebate for the old PO's that were created