Turn off suddenly without any warning when plugin Adapter(Charger)

My Pavillion dv6-3208tx turn off suddenly without any warning when plugin Adapter(Charger) and it won't start unless i unpluged the adapter. I can run on battery. Pliz help...!

Make sure the keyboard is seated properly.
(Instructions can be downloaded here.)
Sometimes, plugging in the adapter when the keyboard is improperly seated can cause this behavior.

Similar Messages

Satellite L755-167 turns off suddenly without any warning playing game

From a while every time i play a game like "PES 2014, NFS,....ETC",
My laptop "Toshiba Satellite L755-167" turns off suddenly almost with in 2 minutes.
I tried to do a clean boot but it doesn't work, the laptop works a little longer then it turns off again.
And it happened lately several times during surfing the internet.
I'm using Windows 8.1 pro 64x operating system
What could be the problem, how can i fix it?

I guess the unit shuts Off due to higher temperature.
The temperature could increase while gaming because the CPU and GPU work at the limit.
In case the internal cooling fans and cooling grilles are clogged by dust, the air cannot circulate properly and this leads to higher temperature.
So in case this issue is related to higher temperature, you should clean your cooling fans using an compressed air spray. This helps to get rid of dust.

I have big problem with battery, It's not working good just two hours and stop without any warning when the battery in 50% then reach 30% in the same moment, then the iphone stopped,what I can do for that and I live in Egypt???any help

My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
what can I do with that??
Also, I live in Cairo,Egypt
waiting your recommendations

Hi,
"But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
Regards,
Thorsten

IPhone 3Gs Turn OFF suddenly and Critical

Hello everybody,
How may you assist me about my iPhone 3Gs.
My iPhone suddenly turn off while the battery is recharged full condition.
it's turn off suddenly without nothing and i tried to turn on (hold on the power button) but doesn't work. As long was turn off the body of iPhone became hot the temperature i afraid to be exploding like a boom because temperature almost 40 C.
i bought it new from legal provider mobile since february 2010. yes warranty but how's happen?
Thank you for helping and thread this message.

That just happened to me today. I found the solution in the discussions....
Press the sleep button (aka power button) and the home button for 5-15 seconds (it took mine 12 seconds). The Apple logo appeared...took about one or two full minutes to boot up, and then my home screen appeared as usual. No data loss at all.
The post where I read this said to ignore the slider that comes up after you press the sleep and home buttons. However, when I did it, no slider appeared.

Macbook Shuts downs without any warning.

Hi All,
Recently I have noticed that my Macbook shuts down without any warning when the battery is out of power. Previously i used to get a warning when about 9-10 mins of power was left.
I have all the updates installed. Also I have not installed any new hardware.
Is there any settings in the System Preferences. What should I do to correct this situation.
Best,
Siva
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 4600
Remaining Capacity (mAh): 3580
Amperage (mA): 1542
Voltage (mV): 12220
Cycle Count: 113

I'd try a SMC reset - that usually clears battery/power related settings and might do the trick.
Blackbook C2D Mac OS X (10.4.9) 120Gig, 1Gig, Superdrive.

MiniDisplay to HDMI : How to turn off the Dual Monitor output when..

miniDisplay to HDMI : How to turn off the Dual Monitor output when the adapter is attached and the TV is off ? And will keeping the adapter connected even if it is not in use, cause damage to the adapter ?

I have my external monitor/tv setup of the left. If I leave the adapter attached with the TV off, I am still able to cross the border/boundry of my MBP screen ! As instead of detecting a TV, the MBP is detecting the adapter as a screen. I do not want to damage my thunderbolt/miniDisplay port by plugging and unpluggin the unit each and every time.

U410 (i5) Turns off randomly without warning

Hello
I just purchased brand new U410 for my sister. On the first day it turns off without warning, multiple times, but then it survive without any incident for hours until I shutdown it properly. I thought it was faulty driver and the bundled windows 8 need an update. I updated the windows 8 and installed all the driver available on Lenovo Support website. Well it runs perfectly fine for few days, then I give it to my sister as a birthday present. Yesterday she use it for the first time for browsing the internet and creating presentation then the U410 just turned off without warning. She turned it on but after few minutes, it's turn off again, repeatedly. She gave up and cry. As a brother who gave her the laptop, I have to responsible to make it works.
Next day I try to use it for work, and it's happen again, turned off without warning multiple times. I decided to take it to store where I purchased it. It works normally perfectly and smoothly without any trouble. i felt like a fool. Then when I get back on my desk, use it for few minutes then it turned off, again and again.
I'm not an expert on computer technology, I'm just a basic user. I read the other forums, they said it can be solved by re-install or tweak something, honestly I don't have that capability. Taking it back to Lenovo Service centre is difficult, I live in rural area in Indonesia with limited internet and transportation support.
I have try to change the power management and nothing happen, it just turn off suddenly. I've spend more than 24 hours downloading drivers for nothing. I need help and already desperate. Lenovo? Help.
PS. My laptop is U410 bundled with Windows 8
Serial Number QB06157482
In the box there was only the laptop and charger. Nothing else, not even a disc or thumb drive.
Sorry for my poor english.

CPU temperature is completely fine.
Try updating the chipset from Intel here: https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=816&DwnldID=20775&ProductFamily=Softw...
Also update the Intel Mangement Engine Interface from Lenovo here: http://download.lenovo.com/consumer/mobiles/0wme03w8.exe
Finally, update Intel HD graphics drivers from Lenovo here: http://download.lenovo.com/consumer/mobiles/0wvg09w8_64.exe
Also reinstall Energy Management Software here: http://download.lenovo.com/consumer/mobiles/em8.0.2.3.exe
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Macbook shutdown without any warning after 40%, when run on battery.

Hello,
My Macbook when run on battery after 40% shuts off without a warning. Is there a way to avoid it? Is there a setting in the battery preferences where I can change to avoid shut down?
Battery Information:
Model Information:
Serial Number: DP-ASMB016-370e-4db1
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 2496
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4276
Health Information:
Cycle count: 142
Condition: Good
Battery Installed: Yes
Amperage (mA): 1488
Voltage (mV): 12281
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 180
Display Sleep Timer (Minutes): 45
Automatic Restart On Power Loss: Yes
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 180
Display Sleep Timer (Minutes): 45
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes
If you can suggest me with the above problem will be of great help. Thank you in advance.

Same issues here:
- When powering the MB on the battery, the MB can go off suddenly without warning, usually at about 20% but, since it started about 2 months ago, it occurred also at 7%, between 30 and 40% and even 70% once… It occurs every time when on batteries. And every time, if I start the computer again, it will shut down suddenly without warning after a few seconds/minutes. When back on mains, it can be powered on normally. It does not go to sleep, it's a complete and sudden power off without warning.
- The battery at about 173 cycles sees its capacity dwindling way too much (it's been dwindling since day one, but it's going down faster and faster, the graph since November 2007 in MiniBatteryLogger is edificatory). The capacity right now is between 2900 and 3460 depending of the feel of the day. It's been calibrated regularly since day one in July 2007. Note that the capacity dwindled from its original capacity but never went higher than this value even if along the way it recovered sometimes more capacity.
I have tried all the tricks from calibrating a little bit more often, reseted the SMC, even a complete system reinstall (that I wanted to do anyway as I had to get rid of the evil spotlight bug). All this to no avail.
So what? :-/
Model Information:
Serial Number: DP-ASMB013-3629-1bbc
Manufacturer: DP
Device name: ASMB013
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0300
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 3320
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 3412
Health Information:
Cycle count: 173
Condition: Check Battery
Battery Installed: Yes
Amperage (mA): -1
Voltage (mV): 12411
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 5
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

I was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help

i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help plzzz

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

My iphone turned off suddenly. I was asleep and it was ok, when i got awake I found it off. what is the problem and how can I fix it?

my iphone turned off suddenly. I was asleep and it was ok, when i got awake I found it off. what is the problem and how can I fix it?

I'm having the same problem. Had to restore it yesterday, and now it's this problem again.
Seems to happend over night. Maybe a sync/backup gone wrong.
Apple?

Computer turns off suddenly when i startx

Hello, I try to run xorg with my nvidia card but I have a big problem.
My graphics card is an Nvidia GTX 670MX (in Asus G75VX)
Here's my setup xorg + nvidia driver procedure:
pacman-S xorg-server xorg-server-utils xorg-xinit
pacman-S nvidia
nvidia-xconfig
and then i do startx ..
startx charges to "GLX.." and the computer turns off suddenly!
The logs file exist, but it is empty
What can I do ? Thanks you

You have the exact same laptop I have, and exact same problem. There is already a long standing topic about this.
https://bbs.archlinux.org/viewtopic.php?id=167195&p=1
However, to cut a long story short; certain laptops with nvidia GPU can't start x with proprietary nvidia drivers and the 3.10, 3.14 and apparently 3.15 kernels. Booting with the kernel parameter
rcutree.rcu_idle_gp_delay=1
seems to solve the issue for most. This is what works for me and since you have the same laptop it should work for you as well. However on the Nvidia forums, there were some people who required an additional kernel parameter
CONFIG_HZ=1000
But for you it should work with just the first one I mentioned so I suggest giving it a try.

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

How to turn off screen without passcode lock.

I just upgraded my wife's iPad 2 from ios 6 to 7. It used to be when you closed the ipad cover, it would turn off the screen right away. I would still like it to turn off the screen right away when the cover is closed (so as not to waste batteries) yet NOT require a passcode when opened again (just a slide of the arrow like it used to be). But right now, if I turn off the lock/unlock feature, and close the lid, the screen will remain full-on until the the auto-lock timer goes into effect - which will be never if I set it to "never".
I don't want to argue about the merits of having a passcode, I concede all your points, so there is no reason to tell me how stupid I am for not wanting to use one - but I would like to be able to have the screen go off without requiring a passcode to turn it back on. Is this now impossible? At the least, it should turn off the screen immediately when the cover is closed, and wait to put it in passcode lock mode until the auto-lock timer expires.
Is there any way to do this or is this just a case of Apple imposing this security feature our own good? Thanks.
-J

Wow. That was a super-fast answer. Thanks. I had seen that optoin and foolishly hadn't tried it because I thought typing my passcode there was just another way to put it into passcode lockdown "immediately". Well, I said I was stupid. Thanks, it does now work the way it used to and I can still have it require the passcode after a certain timeout period.
-J

How can I turn off iCloud without losing my documents?

How can I turn off iCloud without losing my documents?
When I try to sign out Icloud I get the warning (( If you turn off Documents & Data, all documents stored in Icloud will be removed from this Mac))
I don,t want to remove my document on my computer, what should I do?

If you are refering to documents such as Pages and Numbers files....
The only way around this is to "save as" you icloud documents using the associated app to a local folder on your mac. Then turn off icloud.
Of course, when you sign off of icloud, the docs are removed from the mac, but remain in icloud. In the future when you sign back in, the documents are available to you again.
Oh, and the icloud documents are also stored locally in ...
~/Library/Mobile Documents
Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
You can move these files to another folder to save them.

Turn off suddenly without any warning when plugin Adapter(Charger)

Similar Messages

Maybe you are looking for