TURN OFF the music ("dinggggggg") at power on??

I'm a new owner of MBP, and I like it very much. I would like to find out whether it's possible to turn off the "dingggg" sound when you power up the laptop? That sound is really annoying especially in the public area because people will look at you like "*** are you doing? that sound is gay" Thanks

Install the StartupSound Preference Panel
http://www5e.biglobe.ne.jp/~arcana/StartupSound/BETA/index.en.html

Similar Messages

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

  • Thr screensaver turns off the music even when I Set it as yes, screensaver with music. I have restore the appletv, but it still happens.

    My screensaver is turning off the music, even if i choose yes, screensaver with music. How to fix that? I have already restored the appletv.

    Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
    From http://support.apple.com/kb/HT1363
    Putting iPod devices with a Click Wheel into Disk Mode
    If necessary, verify that your iPod has a Click Wheel.
    Before placing the iPod into Disk Mode, verify that it is charged.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
    When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
    If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
    B-rock

  • Turning off the music app

    Can somebody plz tell me how to turn of the music and video app on my Lumia 820 phone since the back key is not doing the trick.

    You can use an all like 'Stop the music' to remove the player, but you can just leave it in pause as well which basically is the same thing really (you only hide the UI).
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • How do I turn off the music on my iPad?

    How do I turn the music off on my iPad?

    Either go into the Music app and tap the pause button at the top left, or double-click the home button to open the taskbar at the bottom of the screen, slide that bar to the right, and press the pause button there (and then press the home button to close the taskbar).
    If you haven't already got a copy then you can download a copy of the iPad manual from here http://support.apple.com/manuals/#ipad

  • How to turn off the music player on 4s

    Hi Everyone, need your help with the Music player on 4s - I haven't been using iMusic until now, always just streaming music from Grooveshark or radio apps. A few days ago I downloaded one song from the iStore and now this happens - when I connect my iPhone to the Media system in my car, with Bluetooth, the music player takes control and all I can hear is this one song I have on the my iPhone. Whenever I try to switch to another music app (streaming radio), it plays for 2 secs and then player comes back. I can't turn that off. If I hit the pause button on the phone, it simply goes to mute and when I adjust the volume back, I get the same song again. How do I disable this music player? I don't know if it's the iPhone or the car system thing, but I couldn't find any option to stop the player from being the default.
    If anybody had the same problem, please advise.
    Thank you

    To close the Music App double-click the Home button and swipe up on the screen image of Music (in iOS 7).

  • How do I stop music on my iphone 4s? When I want to turn off the music I don't know what to do other than pause it. Am I missing something?

    That's it. That's the whole question. Any help would be much appreciated! Thanks.

    Pause and off are the same thing.   This is how you stop the music.
    iPhone User Guide (For iOS 5.0 Software)

  • I used my iPad on the Music setting to play on my Bluetooth speaker.  I would like to use the Bluetooth to play on the Yamaha recording app. but it only plays music from the Music app.  How do I turn off the Music app?

    I found a solution.  Turning the iPad completely off and restarting it allowed me to play the Yamaha recording app.  It is an awkward way to reset/remove the imusic setting.  Is there a better way?

    De-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • I turned on the itunes radio on my computer - I am unable to turn off the music, I turned the volume down, however this isn't the answer

    I turned on itunes radio on my desk top computer - now I don't know how to turn it off or get to the icon to at least change the channel.  I turned the volume down on the computer!  any help anyone can give would be appreciated

    even if you wipe the drive LoJack is still there, it's installed in a hidden partition so you would have get rid of the entire OS. I caught a glimpse of the culprit and from what I seen he is more of a low life than a computer nerd. It is possible he could have tried to log-in but didn't notice the guest and admin account. While I see what you're saying I still have some hope, from what I've read online it took people more than a day to see that their laptop had gone online. If it can't get replaced LoJack has a $1,000 guarantee but that still doesn't make up for the $3,000 worth of equipment lost.

  • How to turn off the wi-fi led (f12)?

    my Pavilion dv6-6c60el has F12 wi-fi led always lit.  Can't switch off hitting f12, Control F12,FN F12, every combination.
    Note that wifi connection is disabled because i'm connected via lan.
    thanks, Tommaso

    Tommaso
    It might be a case of one man's "it makes me crazy" to another's "The light is good" kind of a thing.
    I do not know of a "for sure" way to turn off the button light.   Various methods have been suggested on Google.
    =====================================================================================
    The following solution may work IF you are running Windows 7 or below.  This is NOT a solution for Windows 8.
    Wireless assistant for many systems running Windows 7, Vista, XP.
    HP Wireless Assistant sp49018 V3.50.12.1
    Installing and Using HP Wireless Assistant
    ===========================================================================
    Workaround - One Definition:
    A method for overcoming a problem or limitation in a program or system.
    You might, for lack of wishing to damage the keyboard, use a tiny bit of electrical tape to block the light.
    IF you are going to be the ONLY owner of the computer and you never want to see the light again, dab it with a bit of black model plane paint.
    If this is really making you nuts, you can take apart the system hardware and perhaps disconnect the light at the source.
    =====================================================================================
    Side Bar:
    Though it may cause side effects, that of causing your Wireless / Bluetooth to become unusable or unstable, you could set the Device Manager for the wireless and bluetooth drivers to allow the system to turn OFF the driver "to save power".  I have no idea whether this will work and it does have the aforementioned side effects.
    Example:
    Windows 8:
    Windows key + X > M (opens the Device Manager)  >
    Windows 7:
    Control Panel > set icon view > Device Manager >
    Next...
    Network Adapters >
    Right-Click your Wireless Adapter > Properties > Power Management >
    Select as appropriate:
    UNCHECK “Allow computer to turn off this device…”
    UNCHECK “Allow this device to wake computer” >
    OK
    Windows key + X > M (opens the Device Manager)  > Bluetooth >
    Right-Click your Bluetooth Adapter > Properties > Power Management >
    Select as appropriate:
    UNCHECK “Allow computer to turn off this device…”
    OK
    ====================================================================================
    Good Luck!
    Kind Regards,
    Dragon-Fur

  • Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps wit

    Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps with ios7

    Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past.  With the new operating system you also swipe downward to get the search bar to find an app

  • Satellite A660 How can i turn off the lighting of the power button?

    Hello, I recently bought a new Toshiba A660-1FL.
    However bothers me is the lighting of the multimedia keys, if I work in the dark.
    In Bios I could turn off the led illumination, but the power on/off button is still lighting,that distracts me when i am working.
    This notebook has two power LED, so the power on lighting is in my opinion, unnecessary.
    My question is: How can i turn off the lighting of the power button?

    Here you can see the LED with the same function in front of you: http://s3.imgimg.de/uploads/t009aae62jpg.jpg
    Yes in fact, the difference is color, design, but also location and brightness of the LED.
    For me, this LED is too bright and it is distracting in the dark, as you can see here: http://s3.imgimg.de/uploads/leddf570760jpg.jpg
    I was today at a local electronics store, and saw that Toshiba has the brightest Power LED on A660, but why it must be placed under the LCD and not in the front as in my old notebook Toshiba A210.
    I also had the idea with a tape, but it would look ugly, and it must be removable without residue.
    P.S. Also the fingerprints on the glossy keyboard do not look nice.

  • How do I turn off the Power button Lockout on my HPw1858 monitor?

    How do I turn off the Power button lockout on my HPw1858 monitor?
    This question was solved.
    View Solution.

    Hi,
    Power Button Lockout is displayed.
    The monitor's Power Button Lockout function is enabled.
    Press and hold the Power button for 10 seconds to unlock the Power button function.
    If the above doesn't work then try a monitor reset.  Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Can I turn off the monitor for Mac Mini and use it as a music server?

    I am in the process of upgrading my PC most likely to a Mac product. With the non-server version of Mac OS X, can I turn off the monitor connected to a Mac Mini and use it as a streaming server? Or I have to get the server version of OS X to do that?

    I plan to run Logitech Media Server on the Mac to stream music to players. Each player interacts with the Logitech Media Server to select songs to stream. When I turn on a player, it will wake up the computer from the sleep mode.
    Currently, this Logitech Media Server runs on a Windows Vista machine and it will keep the PC from entering sleep mode while playing the songs. After I play the last song, the PC will start the idle count down and then enter into sleep mode.
    Do you see any problem with my intended use of a Mac Mini?

  • How do you turn off the voice on a video while keeping the background music on?

    I have to watch an exercise video for training. You are supposed to be able to turn on and off the voice by going to the computer icon and toggle the voice on/off. However, that feature isn't on my ipad or ipod. How do I turn off the voice while keeping the music on?

    Hello. I am trying to watch a digital video exercise video in ITunes on my ipad and iPod. I am able to turn the voice on/off when I am watching the videos in iTunes on my Mac Pro, but I can't figure out how to on this feature. I saw it done on a YouTube video. i tried to follow the instructions but the voice on/off doesn't show under settings or under audio-subtitles.

Maybe you are looking for

  • How do I delete the itunes library fully?

    How do i delete the itunes library fully.  I want to delete the itunes library and rebuild it. All my media is on a NAS and no matter what settings i use, Itunes wants to create a sub directroy in the main one i specifiy for media.  this sub director

  • How to move license to new PC?

    hi, I had Captivate 6 in a PC which is now broken, so I can not deactivate license there. How can I install captivate again in the new computer? thanks

  • Time Machine Drive Starts Up Every Time I Try And Open A Word File

    I had this problem when I first got Leopard and now that I've upgraded to 10.6 I'm having it again. Whenever I open word and then look for a file the Time Machine drive starts to whir and I have to wait an eternity to start looking for files on my Ma

  • Any extra settings I need to make for Sql Server 2012 Install for the purpose of SP 2013

    Hi,  I am going to install sql serevr 2012 Ent on a stand alone server Win 2012 box[ say Server2] and I want to make this machine as a db box and will make other box[say Server1] SharePoint box. [ On Server1 where there is no sql server installed ].

  • Allocations with Script Logic

    Hi Experts, We're trying to run script logic for allocations, but aren't able to sum to values to one Costelement. In the Account dimension we have: - Costelements (CE) - Keyfigures (KF) - Prices (PR) What we want to do is: write (KF_A * PR_A) + (KF_