Turn off the Printers color management function for the Pro-100

I've tried everything to get this printer to print realistic colors. I had the Pro-9000 MK II and it was spot on. I'm running Mac OS 10.9.1 and downloaded all the current drivers for the Pro-100. The colors are way off. I am using Print Studio Pro, Under color management I'm selecting the ICC profile for the paper being used, the printer profile was downloaded from Canon's web site and that's selected the same paper type. Color matching is grayed out.
My monitor has been calibrated so I know that's not the issue. Especially since the Pro-9000 was right on the mark. Any suggestions???
Thanks in advance.
Rob
Mesa, AZ

Rob:
“I am using Print Studio Pro, under color management I'm selecting the ICC profile for the paper being used, the printer profile was downloaded from Canon's web site and that's selected the same paper type. Color matching is grayed out.”
I use the same setup as you and I print with, Print Studio Pro and LR4. My monitor is not calibrated. I only use Canon ink and Canon paper and the corresponding ICC profiles. My color output is exceptional. Black & white is good but not exceptional.
When I purchased this printer (a couple of months ago) I just followed the installation instructions and it worked great (for color prints) right out of the box. You may want to try a reinstall to see if that solves the issue. The Pro-100 is a very good printer.
Tinman
Mesa, AZ
Nikon D600; Nikkor 50mm f/1.8G, 85mm f/1.8G, 70-300mmG f/4.5 - 5.6 VR

Similar Messages

Color management settings for the best print output

Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
Garry

Thanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry

Cannot delete an invalid icloud account without turning off find my ipad, but cannot turn off find my ipad without password for the invalid account

Cannot delete a no longer valid AppleID/ icloud account without turning off FIND MY IPAD, but can't turn
off FIND MY IPAD with out the pass for that invalid account

Cannot delete a no longer valid AppleID/ icloud account without turning off FIND MY IPAD, but can't turn
off FIND MY IPAD with out the pass for that invalid account

My iphone 5s was turned off and now it's asking for the password which i don't remember

Please help. My son has the Iphone 5s. He used his fingerprint and of course a passcode when setting it up. Last night the phone was shut completely off and now it won't take his fingerprint and is asking for his passcode which he doesn't remember. Can anyone help with this?

Yes. If you've forgotten your passcode, use this article: iOS: Forgotten passcode or device disabled after entering wrong ...

How can I found out the timing (ticks) of Functions for the FPGA (7833R PCI)?

Hallo,
I have problems to measure times. My measured time is not constant it jitters too much. I need a maximum jitter of 5µs and I had heard that I can solve this Problem if I programm code that is faster than 5µs on my FPGA, so I must know how long does the fuctions need by running the code!
Who can I find this Information?
Martin

Hello Martin,
I don't know how long the functions need to run the code.
But there are a few things you can do to speed up your code.
One thing is to use a single cycle loop for your code, which removes some overhead.
A second thing is to do calculations in parallel. Search for 'pipelining' .
Hope this helps.
Uli

What are the best memory management actions for the ipad mini retina.

I purchased an ipad mini retina 16 GB. I am concerned with all the capabilities of this device that 16 GB will not be sufficient· So I am asking for suggestions regarding effective memory management techniques·

Thanks. Good common sense advice which I will apply as as much as possible·I dont plan on stroring a lot of videos but with IOS 7 apps are so good that it will be difficult to limit the numbers used. Also I will be using it for photo display but I will move photos regularly to my pc for long term storage

Can't access Color Management options for HP 6700 under Mac OS 10.8.5 (Mountain Lion)

Hello.
I've got the HP Officejet 6700 Premium e-All-in-One and I can't find any way to access Color Management options.
The printer is attached (Wi-Fi) to my iMac running Mac OS 10.8.5 (Mountain Lion).
I want to correct a magenta cast to photographs that I've printed. I've had the magenta-cast problem under Lightroom and using Preview to print the photographs, so now I want to work with color profiles in Photoshop Elements.
Photoshop Elements recommends that I "disable color management in the printer preferences dialog".
However, I'm not able to find color management preferences for the 6700 in any of the settings under Mountain Lion:
Not under (Apple) > System Preferences > Print & Scan.
Not under (HP Utility) > Open Embedded Web Server.
Not under (HP Utility) > Printer Settings.
Not under Preview's print dialog.
Nor can I find any clear direction in the online help (at HP or elsewhere) that I've read so far.
Any suggestions would be most appreciated.
Thank you!
Michael
This question was solved.
View Solution.

Please note that in the Print dialog I get "Color Matching" not "Color Management."
Still, I am (at this point) able to control color from Photoshop Elements, so that's good enough to proceed.
Thanks again.

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

How do I turn off hierarchical keywording in LR 5? The interface preference for auto complete is off and I still get California United State Country. I just want Caliofrnia.

How do I turn off hierarchical key wording in Lightroom? The Interface Preference for Auto Complete is already turned off, but I still get California>United States>North America when all I need is California.

You need to be signed in order to reply to posts.
One reason why you may see the hierarchical type format for the keywords is that you have keyword 'California' duplicated in your keyword list.
Lightroom will display them with "< Parent-keywords" appended to the end.
ie California < State < Country and California < United States
If you re-keyword the photos so they only use one version and then delete the duplicate keyword from your keyword list then it will display just "California".
Bruce

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one.

Possibility to assign a color profile in the color management tab for more video formats

Presently, in After Effects CS5, in the color management tab of the "Interpret Footage" dialog box the possibility to assign a color profile to footage is grayed out for many video formats.
Formats that allow to assign a color profile include Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation as well as various image sequences, like tiff-sequences. (Motion JPEG A,B and Quicktime/MPEG-4 are not very helpful in this context because they have a small color shift when reimported to After Effects.)
Formats that do not allow to assign a color profile include Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V. (Here, H264 main concept has anyway the disadvantage that it has a color shift when reimported into After Effects.)
In After Effects CS4 it was possible to assign a color profile to Quicktime/H264, Quicktime/PhotoJPEG, DVCPRO HD 1080p30, but in CS5 this is no longer possible.
Those video formats that do not allow to assign a color profile automatically are interpreted as having the color profile HDTV (Rec. 709) Y'CbCr in case that the videos have 1920x1080 format; similar applies to PAL formats which get SDTV (Rec. 709) Y'CbCr color profile.
(I did not find anything of this automatic assignment to HDTV or SDTV color profile in the "interpretation rules.txt" file, therefore it must be written into the programme itself.)
With growing popularity of wide gamut monitors it becomes necessary to produce footage and other videos that have a color profile different from HDTV or sRGB. When such footage is reimported to After Effects it has the wrong color and the only workarounds are either to use (in After Effects) the effect "Color profile converter" which necessitates extra render time or to use somewhat unpopular formats, like JPEG2000 that has very large filesize.
Presently many footage is produced in Quicktime/PhotoJPEG and therefore it would be very desirable to allow to assign a color profile to such footage in the color management tab of the "Interpret Footage" dialog box.
Does anyone know why in AE CS5 the video formats Quicktime/PhotoJPEG and Quicktime/H264 do not allow to have an arbitrary color profile assigned (although it was possible in CS4), is it a bug, or does it have a deeper reason.
In this context I have a related question, often I read that Quicktime videos have a gamma tag. Does this mean that part of the color profile (the gamma value) is actually embedded/remembered, like you have it for images where the gamma is part the embedded color profile.
I use AE CS5 on Mac Pro 2009 with OS 10.6.7.
Thanks,
Volker

Thank you Rick for this interesting explanations and the links to articles.
In the past few days I performed a few tests in After Effects and it is interesting that you mention that cameras, like the Sony EX3, allow videos to have embedded color profiles. I am not working myself with cameras but either get footage from the internet or sometimes videos from our video department which produces videos with professional SONY cameras, usually I get them in a matrox mxf format.
As far as my test with After Effects show it is not possible to embed color profiles in the videos rendered with After Effects. Independent of the color profile in the working space and independent from the color profile in the output module I always get the same reaction if I reimport videos rendered by After Effects back to After Effects:
In AE CS5 videos made in the formats Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V are always interpreted as color profile SDTV/HDTV (Rec. 709) Y'CbCr (even if I made them in other color profiles, such as Adobe RGB, Photo RGB, sRGB); and there is no possibility to change this interpretation rule.
In contrast videos made in the formats Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation are always interpreted as sRGB (even if if I made them in other color profiles, such as Adobe RGB, Photo RGB, HDTV); only this time I can change the interpretation rule. Therefore if I know for example that if I had selected Photo RGB in the Output module I can change after the reimport the interpretation rule from sRGB to Photo RGB and only then I get again the original colors.
The only exceptions are picture sequences, such as tiff-sequences, where the original color profile is automatically selected in the interpretation of the footage.
Therefore, unfortunately for videos produced by After Effects your advice "If it says something like sRGB and you can change it, in most cases you shouldn't change it because the guess is probably right. If there is no color profile assigned then you should assume that is correct." is not so easy to be applied. You have to know how you did it originally in the Output module and hope that you can change it to the proper color profile, in case that the original color profile in the Output module was different from sRGB and HDTV/SDTV. But it is interesting to hear from you that with cameras there seem to be more possibilities.
For this reason it would be nice if in future versions of After Effects one could change the color profile in the the color management tab of the "Interpret Footage" dialog box also for formats such as Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V.
Of course one can always circumvent shortcomings by using tiff-sequences, QT/jpeg2000, or QT/Animation as formats for storing, which is anyway better for lossless or nearly lossless storing, but the files are then too large and also cannot be played easily with a player.
Volker

How do your turn off the "black and White" setting for the visually impaired?

How do you turn off the "black and White" setting for the visually impaired? Also known as the "tripple Click"

Settings>General>Accessibilty>White on black--> Off

HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do n

I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT5781 My macbook Pro just turned off randomly when I tried putting in the charger for my phone and wont turn on. what do I do?

So I was downloading albums for my phone on the macbook pro and I tried putting in the charger for my phone but i had it in reverse and when i tried putting it in it just completely turned off. When i connected it to the charger the light on the charger for the laptop would just flickr green and red lightly.

Turn off the Printers color management function for the Pro-100

Similar Messages

Maybe you are looking for