Turn off the radio automatically on a schedule?

I was wondering if anyone has had success in automatically turning off the AP radio automatically that is based on time of day? We are thinking of turning it off with a script. Can this be done through an SNMP statement?
Any feedback would be greatly appreciated.

Hi
You can certainly achieve this using the Wireless Lan Solutions Engine, and that uses SNMP to configure the APs, so it should be possible to do it through using an SNMP statement.
HTH
Kev

Similar Messages

  • Turn Off AOL radio Automatically

    Hi all:
    Is there a way for me to turn off AOL radio automatically on my iPhone after a certain amount of time? I tried using the clock app, but to no avail.
    Thanks
    JJM

    There's nothing in the iPhone iOS that can do that. Your only option is if there's a setting in the app itself.

  • My phone don't charge without turning off the radio signal on the phone.

    My phone do not hold a charge unless I turn off the radio on the phone or remove the sim card. Prior to this it while charging a black plug used to replace the lightening bolt on the battery symbol. However, while the radio is off the plug do not appear. Please advise.

    Hello seanjontt
    Welcome to BlackBerry Support Forums
    Are you sure that the battery is good enough or have you tried to use another Good BlackBerry battery , if not then try to arrange a fully charged battery and test it on your device , it will reveal if the problem is within your device or the Battery itself.
    Try it and let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Turn off the radio in access connection

    I am going to deploy AccessConnection 5.33 on XP to a number of clients and I want to turn off the radio with a vbscript when users log off. I have heard that this can be done in the registry but I haven't found the correct key.
    (I don't want to use Fn+F5 to do this)
    Does anyone know what reg.key to use?

    I don't know about the registry or any vbscript but there is one option in the access connection setting that say turn off all wireless connection when the user log off....
    it's under the advanced screen, global setup (or whatever is called; i'm using chinese) and the third checkbox under the network tab...give that a try...might need to do that as admin to apply to all user?
    maybe that's what are you looking for or a good place to start?

  • WRT150N - Is is possible to turn off the radio transmission?

    Hi all,
    I have a WRT150N. I currently use it as a router, accessing the Internet through a cable, not the wireless radio signal.
    I would like to turn the wireless radio signal off because the radio interferes slightly with my Plantronics CT12 headset phone.
    Is there a way to completely turn off the broadcast of the radio signal?
    I did set the Wireless Network Mode to "disabled", but I have read elsewhere on this forum that this does NOT disable the broadcast of the radio signal.
    I would be grateful for any help.
    Thanks much,
    Warren

    You need to have to disable the wireless broadcast ... for the router .... you can change the wireless channel on it
    Radio Band - 40Mhz
    Wide Channel - 6
    Standard Channel - 8 ...
    Click save settings ...
    Again check that the issue occurs or not ....

  • My iphone4 recently stopped working in my car and no longer asks for audio sources.  It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

    My iPhone recently stopped asking for audio source in car and no longer works through the speakers.  It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate.  What happened?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • HT201210 After asking a question last week, I now get scores of emails every day. I turned off the radio buttons on " notify me by email " respectfully please help

    After asking a question to the community last week, It now get scores of emails now with questions . I had marked the radio buttons to be notified but
    Later found them, and un clicked them all. Also I might have been hacked, because I was charged yesterday with an App, that I did not order!!!
    I only know that, because I get an instant message from my bank by phone, when I spend any money. I am worried.
    Bambi

    Hello Dorothea5916,
    It sounds like you changed your forum account preferences and now they have changed back, and you have an unauthorized purchase on your iTunes Store account and have concerns about your account security. I recommend first changing your Apple ID password with this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    Go to My Apple ID (appleid.apple.com).
    Click “Manage your Apple ID” and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you're unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    Click "Password and Security".
    In the "Choose a new password" section, click Change Password.
    Enter your old password, then enter a new password and confirm the new password. Click Save when done.
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password
    You should also report an issue with the purchase to the iTunes Store support directly with the following article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    To enhance security for your account you may want to look into Two-Step Verification to help prevent unauthorized access to your account:
    Apple ID: Frequently asked questions about two-step verification for Apple ID
    http://support.apple.com/kb/ht5570
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How do I turn off the radio station streaming I used several days ago on Safari?

    I went to local npr.org radio station in Safari and listened for the afternoon.  When I closed out the tab, the station continued playing, and now every time I get on Safari, the station starts playing.  I have closed out Safari, rebooted computer, even trashed Flip4 app and still can't get it to stop. Every time I open Safari, which I like to use, I am listening to WAMU in DC.  Ideas?  Thanks! Kate

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Test.

  • Can I turn off the automatic save feature

    Is there a way to turn off the "saved automatically" feature?

    I am sorry but there is no setting for that.
    Andrew

  • How can I turn off apps that automatically sync?

    Whenever I try to move music from itunes to my ipad mini it says it is over memory.  I can see the music on the ipad but it is grey and will not play.  I have tried to delete apps (which are taking up most of my memory) I do not want but it keeps putting them back on.  I have turned off the 'sync automatically' button on the preferences and devices in itunes.  I have unclicked the 'will install' on the apps section on itunes.  I have synced repeatidly and whenever I click the sync button the things I have just clicked on suddenly become 'will install' again. 
    I only want to move some music across from itunes but it won't even let me do that. 
    PLEASE HELP I AM GOING CRAZY!!

    Yes i did that, but when i went back to my home screen all the applications that i've choose to not using data just automatically activate themselves.... ><

  • Schedule possible to turn on/off the radio/WIFI transmission?

    I want to know whether it's possible to set-up a schedule to turn on/off the radio/WIFI transmission for the Airport TimeCapsule?
    For example: WIFI (radio) is turned off every evening at 23:00 hour and turned on again at 07:00 in the morning

    Yes, it is there is in the setup.
    Go to the network tab
    Click on Enable Access Control and then Time Access Control which will open a second menu page.
    Remember if you want an off time like 11pm and on time at 7am it is a different day.
    So you set off from 11-11.59pm and 12.01-7am next day.
    A 10sec google ..
    http://9to5mac.com/2013/10/06/how-to-set-time-limits-on-your-wi-fi-network-using -airport-utility/
    https://discussions.apple.com/message/22836329#22836329

  • How can I turn off the preview (overview) automatically executed when I launch Image Capture?

    I love using Image Capture, but every time I launch it, it automatically does a previes of my scanner's flatbed.  Most of the time, I don't use the flatbed.  I use the feeder to scan multiple pages. 
    My question is this:  Is there any way to turn off the automatic preview (overview) that Image Capture executes when it's launched?
    Thanks in advance for any and all assistance!   

    Not a direct answer.
    From Image Capture Help:
    Scan pages with a document-feeding scanner
    When you scan a document with a document-feeding scanner, the same settings are used for all the pages in the feeder. If your pages need different settings (for example, some are grayscale and some are color), separate them into different groups.
    Before you begin these steps, you need to open your scanner. For instructions, see one of these help topics:
    Scan an image
    Scan an image with Image Capture
    Scan an image with Preview
    Place the pages in the scanner’s document feeder.
    Turn on the Use Document Feeder option, if it’s present.
    Set scanning options.You may need to click Show Details to see all the available options.Here are some of the options you can set. The options available to you depend on the scanner you’re using. Some options aren’t available on all scanners, and some scanners may have more options.
    To choose the type of image being scanned, use the Kind pop-up menu.Choose Text for black-and-white images with high contrast, such as text. Choose Black & White for grayscale images. Choose Color for color images.
    To scan both sides of a page, select Duplex.
    To choose a size for the scanned image, use the Size pop-up menu.
    To choose where to save the scanned images, use the Scan To pop-up menu.If you choose a folder, the images are stored in that folder. If you choose an app, the images are opened with that app.
    To adjust the colors or exposure of the scanned image, choose Manual from the Image Correction pop-up menu, and adjust the controls.If you don’t see the image correction controls, scroll down or make the Scanner window taller.
    Click Scan.The scanner scans the pages one by one.

  • My iphone 3gs has started showing the wrong time  and date. All was fine until this afternoon when it changed.  My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

    My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed...  to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time.  The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time.  The phone can not find my time zone any more.   The only fix I found was to turn off the automatic setting for time.  What is  happening? Ideas?

    just sorted mine went to
    settings-mail,contacts,calender-timezone support
    then turned it off then on tapped time zone and typed london
    this did sort mine

  • I am returning to using firefox 4.?.....I will need to turn off the automatic software update so that it does not update back up to firefox 7 again.

    Hi, I am back again with my tweaked brain. LOL I am trying to go back to Firefox 4, which I had so much less trouble with and liked a whole lot more. I am told that after installing the older version I need to turn off the automatic Firefox software update (if enabled)........I don't know where the automatic software update is located. Can you help me? Thank you for your help.......I will check back in a little while.......GOD bless you and all that you do for others.........loving you in Christ.......<3

    You can try to clear the cache and cookies to see if that makes a difference:
    <h3>Clearing Cache</h3>
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    <h3>Clearing Cookies</h3>
    #Go to Firefox > Tools > Privacy > Remove Individual Cookies
    #Find the site (ebay.com) that's having problems and clear all cookies.
    #Restart Firefox
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

  • Cannot get turn-by-turn directions via car bluetooth. Do I need to turn off the car radio? I have a 2012 Camry.

    Is anyone else having this issue? I've tried Apple Maps and Google Maps. The audio directions do not come out of the car speakers or the phone itself. I have a iPhone 4S and a 2012 Camry. Do I need to turn off the car radio?

    I can confirm that Google maps and Navigon give Turn by Turn instructions via Bluetooth in my iOS6 iPhone 5. Maps does not.
    I assume this is an error and will be amazed if it's not fixed by release of iOS7 in the Autum.

Maybe you are looking for

  • Service Entry on SO line was revoked n deleted, it still consumed limits

    Hi, Service Entry on a SO line was revoked and deleted but it still consumed the limits.  We need the SE to be zeroed out for an invoice that needs to be processed against that SO. This SO has 2 line items, In both the line items, SES were posted and

  • Service Procurement without SUS

    Hi! We are currently running on Extended Classic Scenario. I understand that there are 2 types of service procurement - classic and external staffing. Both talks about the use of SUS which will not support confirmation and invoicing for extended clas

  • Only One Label is Formatting as Percent in a Pie Chart - Help

    I'm having trouble with a pie chart.  I have only two values in the chart and have added labels.  When I preview the report both labels display correctly.  However, when I right-click the labels in design view and select the #PERCENT option from the

  • Can Someone Explain Crossover and WINE to me ? (want to Download .exe)

    i have Crossover by Codeweavers for Mac, and the APPLE store suggested i download Wine for mac i want to download some .exe files my Windows Friend suggested to me in Crossover every time i open it it RE-Installs the Application (Photoscape), what i

  • Why can't I edit my signature under email settings.

    Why can't I edit my signature under email settings.  I want to unbold the "Sent from my iPhone" and it will only unbold it when it is in italics  I don't want it in italics.