Turn off the radio in access connection

I am going to deploy AccessConnection 5.33 on XP to a number of clients and I want to turn off the radio with a vbscript when users log off. I have heard that this can be done in the registry but I haven't found the correct key.
(I don't want to use Fn+F5 to do this)
Does anyone know what reg.key to use?

I don't know about the registry or any vbscript but there is one option in the access connection setting that say turn off all wireless connection when the user log off....
it's under the advanced screen, global setup (or whatever is called; i'm using chinese) and the third checkbox under the network tab...give that a try...might need to do that as admin to apply to all user?
maybe that's what are you looking for or a good place to start?

Similar Messages

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • My phone don't charge without turning off the radio signal on the phone.

    My phone do not hold a charge unless I turn off the radio on the phone or remove the sim card. Prior to this it while charging a black plug used to replace the lightening bolt on the battery symbol. However, while the radio is off the plug do not appear. Please advise.

    Hello seanjontt
    Welcome to BlackBerry Support Forums
    Are you sure that the battery is good enough or have you tried to use another Good BlackBerry battery , if not then try to arrange a fully charged battery and test it on your device , it will reveal if the problem is within your device or the Battery itself.
    Try it and let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • WRT150N - Is is possible to turn off the radio transmission?

    Hi all,
    I have a WRT150N. I currently use it as a router, accessing the Internet through a cable, not the wireless radio signal.
    I would like to turn the wireless radio signal off because the radio interferes slightly with my Plantronics CT12 headset phone.
    Is there a way to completely turn off the broadcast of the radio signal?
    I did set the Wireless Network Mode to "disabled", but I have read elsewhere on this forum that this does NOT disable the broadcast of the radio signal.
    I would be grateful for any help.
    Thanks much,
    Warren

    You need to have to disable the wireless broadcast ... for the router .... you can change the wireless channel on it
    Radio Band - 40Mhz
    Wide Channel - 6
    Standard Channel - 8 ...
    Click save settings ...
    Again check that the issue occurs or not ....

  • Turn off the radio automatically on a schedule?

    I was wondering if anyone has had success in automatically turning off the AP radio automatically that is based on time of day? We are thinking of turning it off with a script. Can this be done through an SNMP statement?
    Any feedback would be greatly appreciated.

    Hi
    You can certainly achieve this using the Wireless Lan Solutions Engine, and that uses SNMP to configure the APs, so it should be possible to do it through using an SNMP statement.
    HTH
    Kev

  • My iphone4 recently stopped working in my car and no longer asks for audio sources.  It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

    My iPhone recently stopped asking for audio source in car and no longer works through the speakers.  It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate.  What happened?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • HT201210 After asking a question last week, I now get scores of emails every day. I turned off the radio buttons on " notify me by email " respectfully please help

    After asking a question to the community last week, It now get scores of emails now with questions . I had marked the radio buttons to be notified but
    Later found them, and un clicked them all. Also I might have been hacked, because I was charged yesterday with an App, that I did not order!!!
    I only know that, because I get an instant message from my bank by phone, when I spend any money. I am worried.
    Bambi

    Hello Dorothea5916,
    It sounds like you changed your forum account preferences and now they have changed back, and you have an unauthorized purchase on your iTunes Store account and have concerns about your account security. I recommend first changing your Apple ID password with this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    Go to My Apple ID (appleid.apple.com).
    Click “Manage your Apple ID” and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you're unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    Click "Password and Security".
    In the "Choose a new password" section, click Change Password.
    Enter your old password, then enter a new password and confirm the new password. Click Save when done.
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password
    You should also report an issue with the purchase to the iTunes Store support directly with the following article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    To enhance security for your account you may want to look into Two-Step Verification to help prevent unauthorized access to your account:
    Apple ID: Frequently asked questions about two-step verification for Apple ID
    http://support.apple.com/kb/ht5570
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How do I turn off the radio station streaming I used several days ago on Safari?

    I went to local npr.org radio station in Safari and listened for the afternoon.  When I closed out the tab, the station continued playing, and now every time I get on Safari, the station starts playing.  I have closed out Safari, rebooted computer, even trashed Flip4 app and still can't get it to stop. Every time I open Safari, which I like to use, I am listening to WAMU in DC.  Ideas?  Thanks! Kate

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Test.

  • TS1398 When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet.  The second I turn off the wifi on my iphone, everything runs perfec

    When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet.  The second I turn off the wifi on my iphone, everything in my house runs fine. What is going on?

    Had a similar problem a number of years ago with a laptop my daughter had. The probelm turned out to be the router. What kind of router do you have? Have you checked for firmware updates, or at least tried re-booting it?

  • Does disabling all access points turn off the WiFi radio on Cisco SA520W

    As per the title - does disabling all access points turn off the WiFi radio on Cisco SA520W?  Thanks!

    Hi Denny,
    Yes, if you disable all available Access Points configured on your SA520W, then your radio should be off.
    Best regards,
    Julio

  • I want to turn off the wifi radio and only access my macs through the ethernet ports, I already have an excelent wireless system for my entire house, can I turn off radio?

    How to turn off radio but still backup through the ethernet ports?
    Thanks

    If you are asking about turning off the wireless radio on an Apple router / Time Capsule.....
    Open Macintosh HD > Applications > Utiltiies > AirPort Utility
    Click on the AirPort / Time Capsule
    Click Edit
    Click the Wireless tab at the top of the next page
    Change the setting for Network Mode to Off
    Click Update at the bottom of the page to save the changes

  • I updated my LG G3 this week and now it SUCKS!  When I'm connected to WIFI, nothing on Facebook works.  The photos and videos won't populate.  I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.

    I updated my LG G3 this week and now it SUCKS!  When I'm connected to WIFI, nothing on Facebook works.  The photos and videos won't populate.  I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.   Before I updated my phone, I really liked it, now I don't like my phone at all!  When will this be fixed? I hope it's soon.  I'm thinking of changing providers now.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • ITunes U: how do I turn off the 50 MB download limit for mobile data connections?

    Since I rarely have access to Wi-Fi networks I do actually want to download iTunes U content using mobile data. Videos (and even some slide decks) exceed the 50 MB limit that iTunes U will allow you to download over mobile data connections. How do I turn off the 50 MB download limit for mobile data connections?

    You can't unless the phone is jailbroken (which in turn voids your warranty)

  • TS1398 My macbook is connected to the internet, but my iPad just stopped connecting.  I have "forgotten" the network and restarted, and I have "turned off" the iPad.  It still says it's not connected to the internet, but the wifi signal is strong.

    My ipad was working, and then just said it wasn't connected to the internet.  I have forgotten the network and rejoined, I have turned off the ipad (slid on the arrow), and still no luck.  The macbook is working with no problem.  Help.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Schedule possible to turn on/off the radio/WIFI transmission?

    I want to know whether it's possible to set-up a schedule to turn on/off the radio/WIFI transmission for the Airport TimeCapsule?
    For example: WIFI (radio) is turned off every evening at 23:00 hour and turned on again at 07:00 in the morning

    Yes, it is there is in the setup.
    Go to the network tab
    Click on Enable Access Control and then Time Access Control which will open a second menu page.
    Remember if you want an off time like 11pm and on time at 7am it is a different day.
    So you set off from 11-11.59pm and 12.01-7am next day.
    A 10sec google ..
    http://9to5mac.com/2013/10/06/how-to-set-time-limits-on-your-wi-fi-network-using -airport-utility/
    https://discussions.apple.com/message/22836329#22836329

Maybe you are looking for