Turn off the SQL DB monitoring entirely in scom 2012 (SP1)

Is there a way to centrally target and turn down monitoring of all the servers running SQL DB in SCOM 2012. We actually created groups using the OU's to target the SQL servers but some of the servers which have SQL DB are not in that OU and they are still
triggering DB alerts.
Some of the alerts also include
Management Group: Ancestry Ops. Script: DiscoverSQL2012FileGroups.js : Cannot login to database [XXserver.domain.com][SQLD114B:model]
and these servers are in the OU but still trigerring this DB alert.
Any information about this ll be greatly useful.
Thanks
Hari V

Pretty much what Hopeless guy said. I have scom 2007 in prod, so I use remove-disabledmonitoringobject after I override a discovery. The issue is that these SQL dbs are still being discovered. So if you want to disable sql monitoring
in total for them, override the seed discovery which will have a target of windows server/computer. Then after the override is in palace execute the remove command from SCOM commandshell. You then should scope to the class you want to disappear
(discovered inventory pane), and refresh every 15 min or so to see if they are being removed. I have had to run the remove command a few times to clean some large discovered inventory up.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Similar Messages

Cannot get turn-by-turn directions via car bluetooth. Do I need to turn off the car radio? I have a 2012 Camry.

Is anyone else having this issue? I've tried Apple Maps and Google Maps. The audio directions do not come out of the car speakers or the phone itself. I have a iPhone 4S and a 2012 Camry. Do I need to turn off the car radio?

I can confirm that Google maps and Navigon give Turn by Turn instructions via Bluetooth in my iOS6 iPhone 5. Maps does not.
I assume this is an error and will be amazed if it's not fixed by release of iOS7 in the Autum.

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

How can I turn off the ink level monitor on a HP Photosmart 7520?

I have put new cartredges in my printer and it shows the ink levels are low. Can i go into settings and turn that off? If so how?

Hey @NEVER-SATISFIED ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
No you are not able to turn of the ink levels notifications, however; if you have just purchased new ink and it shows that the ink levels are low you can call HP Technical Support.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps. Let me know.
I worked for HP.

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

How can I turn off the monitor but not the computer on my touchsmart 310..

I leave my computer on at night to keep wireless network going, but I want to turn off just the monitor. All of the advice I've seen is to turn off the touchscreen feature -not the monitor itself. Thank you.

You can set the timing for the display to turn off.
Try this:
Click:
Start.
Control Panel.
Hardware and Sound.
Power Options.
On the left bar you'll find Choose when to turn off the display.
At Turn off the display: there is a drop dowm menu to choose the number of minutes before the display turns off. Make your selection.
Try that and see if it works for you.
I hope this is what you were looking for,
GeorgeFN
GeorgeFN
I work on behalf of HP.

How do I turn off the Power button Lockout on my HPw1858 monitor?

How do I turn off the Power button lockout on my HPw1858 monitor?
This question was solved.
View Solution.

Hi,
Power Button Lockout is displayed.
The monitor's Power Button Lockout function is enabled.
Press and hold the Power button for 10 seconds to unlock the Power button function.
If the above doesn't work then try a monitor reset. Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can I turn off the monitor for Mac Mini and use it as a music server?

I am in the process of upgrading my PC most likely to a Mac product. With the non-server version of Mac OS X, can I turn off the monitor connected to a Mac Mini and use it as a streaming server? Or I have to get the server version of OS X to do that?

I plan to run Logitech Media Server on the Mac to stream music to players. Each player interacts with the Logitech Media Server to select songs to stream. When I turn on a player, it will wake up the computer from the sleep mode.
Currently, this Logitech Media Server runs on a Windows Vista machine and it will keep the PC from entering sleep mode while playing the songs. After I play the last song, the PC will start the idle count down and then enter into sleep mode.
Do you see any problem with my intended use of a Mac Mini?

How do you turn off the Mac book pro monitor when using dual monitors?

How do you turn off the monitor on the mac book pro and only see your second monitor?

You close the lid and run in "clam-shell" mode
http://support.apple.com/kb/HT3131?viewlocale=en_US

MiniDisplay to HDMI : How to turn off the Dual Monitor output when..

miniDisplay to HDMI : How to turn off the Dual Monitor output when the adapter is attached and the TV is off ? And will keeping the adapter connected even if it is not in use, cause damage to the adapter ?

I have my external monitor/tv setup of the left. If I leave the adapter attached with the TV off, I am still able to cross the border/boundry of my MBP screen ! As instead of detecting a TV, the MBP is detecting the adapter as a screen. I do not want to damage my thunderbolt/miniDisplay port by plugging and unpluggin the unit each and every time.

When mirroring - can I turn off the monitor on my Mac...?

I just set up my MacBook Pro with my AppleTV and everything is working nicely. However, It would be even better if I could get my computer monitor to turn off while I'm viewing on my TV.
Is this possible?

Actually, the answer is YES!
Thought it best to post here again because I discovered that while Mirroring, turning off the monitor on my MacBook Pro is possible (despite a few replies here that it cannot be done). Its super easy to do, just dim the monitor until it goes completely dark, and continue to use your computer as it is displayed on the TV. The trick is not to close the monitor down, that will put the computer to sleep.
While I was hoping I could also achieve the same result while my MacBook is connected to my Cinema display, it seems the dimming capability on the Cinema display is limited to getting very dim, but not turning off completely.
I'll keep researching this some more and if I have any more updates I will post back to share -- hopefully there are other users who will find this info helpful.
For now, I will be using my TV as my primary display while my MacBook Pro's monitor is turned off.

Turn off the primary monitor

I use my secondary monitor to see movies on a video projector,
is there a way to turn off the primary monitor of my imac?
Anybody could help me?
Thanks
Andrea Ambrosi

Im not sure if this will work but if you press control+**** and eject it turns of the monitor in leopard i dont know what your running but it might work

Turn off the monitoring

Hi all,
Does anyone knows about how to turn off the BPM monitoring so that so many tickets will not be created.
Thanks
Tripti
Edited by: Tripti Sharma on Jul 22, 2008 12:36 PM

Hi,
that depends on the release u use ... For release <SPS15 u can unasighn the notification method via the TA rz21.
If u use CEN monitoring its easy to unassign --> just goto TA RZ21 --> start: Technical Infrstructure --> configure central systems --> assign central autoreactions
The new mask gives u the possibility in the bottom frame to unassign methods.
If u use lacal monitoring (that u will see when u start the assign central autoreaction and no method where assigned) --> than it will be more difficult u have to unassign every MTE from the auto react methode ... Or u modify the the auto react methode
BR Lars

How to turn off the Monitor???

Hey friends!
Is it possible to turn the Monitor (Display Device) ON and OFF from a java application???
Thanks a lot!
Ricardo

Hi! This is completely Windows-specific, and I found it on a website, so I don't take credit for it. Hopefully you do know how to use JNI, so here's the C code you could try out (no I haven't tried it yet).
JNIEXPORT void JNICALL Java_JNative_turnOffMonitor (JNIEnv *env, jclass cls)
SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
}2 turns off the monitor, HWND_BROADCAST sends the message to all top-level windows, 1 sets the monitor to low power and -1 switches the monitor back on. Please use at own risk, and you'll probably want to have some more error handling in your code if you do plan to use it. You will need to include windows.h and user32.lib (unless you are dynamically linking) for the code to compile.
Hope it helps.
Cheers
P.S. Here's the website I found it in (note, the code's in Delphi, so I just took the API calls, and modified the first parameter to HWND_BROADCAST). http://chiragdalal.tripod.com/howto/monitor_on_off.html

Turn off the SQL DB monitoring entirely in scom 2012 (SP1)

Similar Messages

Maybe you are looking for