Turn Off Vibration When Pressing Menu Key

A user suggested unchecking haptic feedback to turn off the vibration when you touch certain keys. I did not work or maybe we are talking about two different vibration functions of the Droid 2.
When you press any of the four function keys at the bottom of the device (e.g. Menu, Home, Back, Search key) or swipe right to unlock, the device does a small vibration. Is it possible to turn that feature off?

unimatrix001 wrote:
A user suggested unchecking haptic feedback to turn off the vibration when you touch certain keys. I did not work or maybe we are talking about two different vibration functions of the Droid 2.
When you press any of the four function keys at the bottom of the device (e.g. Menu, Home, Back, Search key) or swipe right to unlock, the device does a small vibration. Is it possible to turn that feature off?
Are you sure you are looking in the right area?  I believe the one you are looking for(May be as above since it has "blur" integrated) should be under
Menu button --> Sound Settings --> Haptic Feedback (this one may be different due to Ninja Blur)
there should also be one for the  android keyboard
Menu button --> Language & Keyboard --> Android Keyboard --> Vibrate on keypress.

Similar Messages

  • Turn off vibration when receiving a text

    Hello,
    How do I turn off any vibration when receieving an SMS text message?
    I tried to do this by going to:
    Messaging App -> Settings -> Uncheck "Notification Vibration"
    This made the vibration sound be softer, but it still has a vibration sound.
    How can I turn this off completely please?
    Thanks.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    You can either hold the ON/OFF button down for 2-3 seconds and you should find three options in the bottom of this list (silent, only vibration or sound) or you can hold the volume down(-) button to the lowest and it will go to vibration mode, press the button once again to make the phone silent.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Turn off vibration when in case

    I have turned off all the vibration options on my Blackberry Curve, however when I put it into a case, everytime I receive an email it vibrates.  This is the same for everyone else in the office.  How can I prevent it vibrating everytime I receive an email.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    You can either hold the ON/OFF button down for 2-3 seconds and you should find three options in the bottom of this list (silent, only vibration or sound) or you can hold the volume down(-) button to the lowest and it will go to vibration mode, press the button once again to make the phone silent.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • How do I turn off vibrations when changing sound preferences?

    I recently changed from syncing from my iphone to my computer to syncing it to icloud.  Well it reset all my settings upon both syncs and now it vibrates every time I change a tone of some sort.  I gone into my settings and have the vibrations turned off under sounds, yet it continues to vibrate whether I have the phone on silent or otherwise. It is very annoying.  Please help Apple community! What can I do to get these vibrations to turn off completely?  I never want the phone to vibrate.

    Someone else reported this sound last September, but there wasn't any resolution to that thread: [https://support.mozilla.org/en-US/questions/938003 After upgrading to Snow Leopard on my Mac, Firefox makes typewriter or paper crinkling sounds when going to links and sites].
    Does it seem to be at all related to whether pages use Flash? Just wondering whether it is some kind of notification sound related to Flash's capabilities of using the webcam and microphone.

  • Turn off vibration when charging

    I have my phone with no vibration and on mute, yet it vibrates whenever I plug it in to charge. How can I remove this?
    Thanks

    As far as I know, you can't, it is a feature to confirm the connection between the phone and the charger. It will only stop vibrating when you switch off the mute button, but this will give you the connection sound back instead.

  • How to turn off vibration when receiving imessages when app is open...

    When I had my 4s, whenever I received an imessage when the app wasn't actively open, it would vibrate to alert me of the message.  When I opened the app to read my messages and I'm having a text conversation, the phone no longer vibrated for incoming texts while the app was actively open.  I liked this feature as the phone wouldn't be constantly shaking for each and every line of text I receive.  I now own the 5s and notice that the phone vibrates for every message, even when the app is open.  How do I set the phone up so it behaves just like when I had the 4s?  I don't want the phone to vibrate at all when the app is open, only when it is running in the background and I'm receiving a new, unread message.

    Guys, I have exactly the same problem with my 5s. I would say it is a software glitch in all 5s firmwares. I have 7.0.6 and still the problem is there. I don't know about newest 7.1, I will eventually try install it. This really makes me crazy because when I chat and have the app open it vibrates with every new message and it is a shock for me every time Very annoyinh indeed. We should  report this bug to Apple. My wife has 4s and it works perfect for her - no vibrations when app is open... So it's definitelly a bug...

  • Please give us the option to turn off vibration when plugging phone into power!!!

    Ok you're married, you're up later than your spouse, you creep into the bedroom, eventually you manage to put the little connector in to charge overnight.... then BRRRRR BRRRRR a "silent" vibration that is so loud it wakes up your spouse. So Apple what is the explanation for not allowing us to turn this off? I'm guessing you want that satisfying vibration safe in the knowledge the phone is getting power, except it's annoying as **** plus the screen turns on anyway and floods the room with light. Why do I need 2 methods of confirmation that the phone is getting power.

    I would imagine, if your spouse is such a light sleeper, you've got your phone on mute or DND at night anyway. Change the setting back in the morning. Or, charge the phone in another room. Or buy your spouse earplugs.
    Submit your feedback to Apple here:
    http://www.apple.com/feedback

  • My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    Wrong forum. This is the iPad forum.

  • E63 not showing switch off option when pressing re...

    Recently my e63 not showing switch option when pressing red key however that key works for exit and cancel.So I am not able to switch off. Help me please.

    Hi, alexbonn, and welcome to Apple Discussions.
    1. No, there isn't.
    2. I don't think so, though I'm not 100% certain. I believe the designers assumed that if you have your display open, (a) you want it to operate, and therefore (b) you want it to self-adjust its brightness for ambient light conditions, as it normally does when operating.
    If you don't want the display open, you must operate the machine in clamshell mode, following all the instructions in the article you referenced. It isn't possible to start the machine up from a cold shutdown with its display closed.
    If you don't want to use an external keyboard and mouse, and therefore can't use clamshell mode, you will just have to turn the backlight level down after each time you start the computer. That takes one second to do with the F1 key, so it shouldn't be too much of a bother. You could eliminate it by putting the computer to sleep instead of shutting it down. Each shutdown-and-startup process takes at least a full minute, so skipping it would save you far more time than finding a way to start the machine up with its display off. The machine also wakes from sleep far faster than it starts up from shutdown, and it remembers its display brightness setting when doing so.
    Message was edited by: eww

  • My ipad has been turning off every now and again for some time now but last night it turned off and when i try to turn it back on its just a blank screen with the back lighting. please help me

    Hi there, ok so my ipad has been either turning off or just locking itself for sometime now but last night it turned itself off and when i tried to turn it back on it just came up with a blank screen with the back light. When i put it on the charger the sound of it charging happenes but nothing else. I hav tried resetting it but as i am not very savvy with all this stuff i thought i would get some advise before doing anything else. it anyone can help me that would be fantasic
    thank you

    If a reset doesn't work, try and force iPad into Recovery Mode:
    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • HT5569 How do I turn off phone when in foreign lands or on a cruise ship?

    How do I turn off phone when in foreign lands or on a cruise ship?

    Press and hold on the power switch until 'Slide to power off' appears then slide to power off.

  • Can't turn off vibrate

    I replaced my 16GB 3G yesterday. The new one vibrates when I get a text or email, even though vibrate is off. How do I turn this off?

    Did you turn off vibrate for both the ring and silent modes? By mode, I mean the position of the silence switch on the side. You can separately toggle vibration for both the regular (ring) mode, and for the silent mode. In Settings>Sounds, the top vibration slider is for the silent mode, and the next vibration slider is for the ring mode. Are both of yours off, and it still vibrates?

  • Turn off Vibration on Phone on Ring without turning off Vibrate on Message?

    I have in Sounds>> Vibrate On Ring and Silent both ON. I have a vibration and ringtone chosen for my Phone notification, and a vibration chosen for my Message notification. What annoys me is that when I have my phone switched to Ring, whenever I get a call, my iPhone rings and vibrate at the same time! I'd like to be able to let the phone only ring and not vibrate. If I turn OFF Vibrate on Ring, the Phone doesn't ring when switched to Ring anymore, but when I get messages, it doens't vibrate anymore. Is it possible to only let the phone Ring when switched to Ring, and let the messages vibrate as well?

    http://support.apple.com/kb/TS3221

  • Turn off vibrate on alarm only

    Hello,
    I have an iPhone 6 with iOS 8.1.2 and I use the alarm to wake up every morning. I prefer to wake up to sound only without any vibration. If I turn off "Vibrate on Ring" in settings the vibration for the alarm also turns off, which is great. Unfortunately if I forget to turn it back on I will almost certainly miss phone calls or other notifications and on the flip side if I forget to turn it off before bed I have a heart attack when the phone starts vibrating with the alarm . Is there a way to leave the vibration on when the phone rings but have it off for the alarm? This would avoid me have to switch it back and forth everyday.
    Thank you

    Hey Mike,
    You and I (and I believe a whole slough of people) have the same issue with this.  It drives me up the freaking wall!  Apple picked their fruit too early on this oversight.  I have the iPhone 4S and it's the same song and dance.  Everything your post says, is what I came to the interwebs for.  C'mon Apple!!  Address this issue that is driving people a little more insane with each and every alarm that goes off.  I'm checking if the Samsung devices have this sorted out properly.

  • Hello people, I lost all my contacts on my iPhone. Facebook contacts integration is turned off. When I got to know that I have no contacts on my iPhone. I checked my settings and iCloud backup and contacts on iCloud (in settings) were off. Is there a solu

    hi me kashif Hello people,
    I lost all my contacts on my iPhone. Facebook contacts integration is turned off. When I got to know that I have no contacts on my iPhone. I checked my settings and iCloud backup and contacts on iCloud (in settings) were off.
    Is there a solution to get all my contacts back? Please help me. I want my contacts back, as soon as possible.
    Thank you in advance.
    iPhone 4S, iOS 7.0.4

    Unless as part of a backup, or stored somewhere else, they are gone.
    Your son needs his own Apple ID for iCloud, FaceTime & iMessage. He can continue to use yours for iTunes content, but for everything else, he needs his own.
    When you did what you did, as far as iCloud knows, this is the same person with multiple devices, and that's they way things are supposed to work: keep everything in sync.

Maybe you are looking for

  • Savin a Form on click of a button.

    Hi All, I have created an Adobe Form using Adobe Designer 7.0. I want to save the filled up form using a button on the Form itself, instead of going via the File->Save As option. Is there a way of eleminating the File->Save As method, and instead hav

  • Doubt about database point in time recovery using rman

    Hi Everyone, I have been practising various rman restore and recovery scenarios . I have a doubt regarding database point in time recovery using rman. Imagine i have a full database backup including controlfile scheduled to run at 10 PM everyday. tod

  • RDP update and OSX 10.9.5

    The update supposedly fixed the dual monitor problem in Yosemite, but it did not for OS X 10.9.5

  • Best practice about dial-peer creating when using analog lines

    Hi, I am trying to find out what is the best practice when creating dial-peer for analog lines on CME, should I use trunk group or create separate dial-peer for each FXO ports? If I use trunk group, is there any advantage ( lesser dial-peer)  or disa

  • File saving on local system

    Hi all ,          i want to save a text file on user local sytem without user interaction usiing file Refrence class in flash , how it could be do that ,please help me out frm this probelm,any suggestion will be thankful for me ..)