Turn off "you have mail" sound when iPad2 is ASLEEP
My wife's iPad 2 beeps all night as emails come in through her exchange email account. How do you stop this? The iPad is ASLEEP, it shouldn't be making any kind of noise in my opinion, and so far it seems impossible to turn off!? Very un- apple, what gives?
Thanks
Bob
My solution to this very annoying "feature" is to do the following:
Go to settings
-Mail,Contacts,Calendars
-Fetch New Data
-Advanced
-Exchange
-Set the schedule to "Manual"
I agree with you Michael, I do NOT want to be disturbed by an email notification at night. I also do not want to hear a pause in my music when I get an e-mail.
Now I simply get my updates when I open my mail client. If someone needs me right away, they should call.
Thanks,
Phil
Similar Messages
-
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
How do you turn off Verizon voice mail?
I have an answering machine, I would like to turn off Verizon voice mail so that all unanswered calls go directly to my answering machine. The tech that installed my service said it was possible, but the directions he gave me led to a dead end. Does anyone know how to turn off Verizon voice mail? Is there a way to do this on-line or via the telephone (without having to contact a representative)?
Since the Verizon Voicemail will answer calls to you number when you are using your phone, a second incoming call to your number while your own answering machine is taking a message WILL BE forwarded the the Verizon Voicemail system --possibly giving you recorded messages in 2 places. Note that each increase in the ring count will add 6 seconds to the amount of time it takes to forward the call to the Verizon Voicemail system.
If you really don't what the Verizon Voicemail system which can handle multiple calls simultanteously (something you own answering machine cannot do), your only option is to phone Verizon's business office and request that they remove the Verizon Voicemail service from your line.
Message Edited by kvelling on 08-31-2008 09:30 PM -
How do I turn off the "make a sound" feature with Find My Mac. I think my macbook was stolen and I don't want it to make a sound when it connects. Can turn the feature off somehow?
ica310 wrote:
I've read some forums that say I have to overwrite it with a silent sound file but I do not understand how to do this.
You have to jailbreak your phone to do this, voiding all warranty & support. Just flip the Ring/Silent switch when you send. -
How do you turn off the auto select behavior when working with shape layers?
How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml -
i need to free up storage on my iPhone 4s to do an update. I have turned off my photo stream, but when I go into Usage Settings, it says that photo stream is using 3.7gb of space. How do I get rid of this?
iCloud is not designed to "store" photos (as in long term storage). iCloud can be used to sync photos from one device to another (photo stream) and to store a backup of the camera roll. But that's pretty much it.
Camera roll is the group of all photos taken by the device (but not other photos synced to the device from another source). Your extra storage on icloud will do you no good. The recommended way of storing photos on a device is to sync them to a computer.
So, your questions..
1) You don't/can't
2) No, because of 1.
3) On a computer, deleting large groups of photos is relatively painless. not so on a device.
4) You can't access photos on iCloud because they can't be store in icloud. You can't view/access photos in a backup on icloud unless you restore a backup to a device.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083 -
When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm working on these files? On top of this, my red arrows get moved around also.
Hi ,
Could you please update me with few details like what version of Acrobat are you using?
What OS do you work on ?
Do you experience this any particular PDF or happens with all of them?
Did you try the same with turning on the OCR ?Please check the same and compare the outputs .Does that help you in anyway ?
If the file is not confidential ,could you please share the file with us so that we can analyse it our end and revert you with the appropriate answer .
Please share the file on [email protected] and please cc [email protected] as well .
Regards
Sukrit Dhingra -
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
mahtab2 wrote:
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
I deleted my Mail app sometime back. I reinstalled it again, today, on my Macbook Snow Leopard Mac OS but when I try launching Mail, it says ' You have Mail version 4.0(1075/1085). It can't be used on Mac OS X version 10.6.8(Build 10K549)",
The Mail version for your machine is 4.6 (1085) You can get it via the Combo updater. Mac OS X 10.6.8 Update Combo v1.1
Then follow with software updates to pick up the most recent security and iTunes updates. -
How can i turn off all the mails that i recive when use any program form my iPad?
How can i turn off all the mails that i recive when use any program form my iPad?
Everytime i use the my ID recive an e Mail to inform me.
-
"You have mail." notification in shell - how to get rid of it?
Hey guys,
whenever I start a shell (zsh, but same for bash/csh/ksh) I get the message that "You have mail.". Well, that's true, there are mails in my /var/mail/`whoami`. But as they ain't new, I don't need, and more, don't want this message. How do I turn it off?
It's gone when I move my mail from /var/mail/$USER to somewhere else, but that is no solution.
Ideas? Clues? ANYthing?There's something strange in how Terminal.app invokes
the shell that I haven't had time to trace down yet;
I can see the following:
Terminal.app with default settings does not invoke
~/.bashrc but displays the "you have mail" message.
Terminal.app set to launch /bin/bash neither invokes
~/.bashrc nor displays the "you have mail" message.
xterm in X11 invokes ~/.bashrc and does not display
"you have mail".
I always use xterms because they seem to have better
compatibility with more shell commands than
Terminal.app.
The one thing I didn't try is to put the the
MAILCHECK=-1 in /etc/profile and then reboot.
Well, I use iTerm, but it's the same for Terminal.app
I also tried MAILCHECK='', MAILCHECK='-1' and all that... and if I check it, it's set, but still this **** message...
Geez, it can't be thaat hard, I thought!? -
How to turn off the touch interface sound?
Model: HP Touchsmart IQ826t
Finally get to use this machine the way it was intended now that Windows 8 is out, but the touch interface sound is bothersome. Seems as though it should be the easiest thing in the world to turn off.. but I cannot for the life of me figure it out. Ive searched the web high and low..even seen others ask this same question with no response whatsoever.
How do I turn off the touch interface sound?? (the 'beep' sound made when my finger makes contact with the screen) Ive tried going to the now updated 'Pen and Touch' (previously HP Touchsmart Configurations) settings under the 'Hardware and Sound' in the Control Panel and..nothing.
Any input would be greatly appreciated. Thanks!Thank you for visiting the HP Support Forums. I'm sorry but this is a peer-to-peer community of HP customers, and not a venue to contact HP directly. Most of the users here are consumers like yourself who are offering solutions because they like to help others, and any HP employees you see are here on their own capacity and not representing the company.
If you have additional or direct feedback for HP about their products or services, or questions about repair, you can use the link below for contact information.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
OrnahP
HP Support Forums Moderator
Clicking the "Kudos Star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation -
I just upgraded to ios7 on my iphone 4s and now have now sound when it rings
I have tried everything I can think of in settings. Now that I have updated to IOS7, I don't have any sound when the phone rings. How can I get this fixed?
Hey firestonov,
Thanks for the question. I understand that you are experiencing issues with sound after updating to iOS 7. To troubleshoot, let’s first restart your iPhone:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Additionally, check to make sure your ring/silent switch is not toggled, as well as Do Not Disturb:
Ring/Silent switch - iPhone
http://help.apple.com/iphone/7/#/iph3bd01398
Ring/Silent switch
Flip the Ring/Silent switch to put iPhone in ring mode or silent mode .
In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.
Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent.
For information about changing sound and vibration settings, see Sounds and silence.
Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap the Do Not Disturb button . See Do Not Disturb.
Thanks,
Matt M. -
How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
ThanksHello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments -
How to turn OFF trackpad on MacBook Air when using Magic Trackpad
How to turn OFF trackpad on MacBook Air when using Magic Trackpad. Anyone have a clue on how to do this?
Do you get more than one trackpad in system preferences? If not, which trackpad does it show in the "movie" in Preferences?
Maybe you are looking for
-
Today I use Oracle objects with JPub and no any problems has occupied before. But now I intend for build EJB that use JPub produced classes, and the main problem is the JPub produced classes not serializable. Of course I try to subclass those classes
-
So about a 2 months ago I bought an hdmi cable, along with the cable adapters to hook up your macbook to the tv. It worked very well initially but lately when I've been hooking it up (I use it to watch netflix on the tv) it will disconnect and give m
-
BAdI for replacing CRM Pricing
Hi Experts, I have a requirement to make a RFC call to retrieve the pricing from ECC/Vistex in CRMD_ORDER transaction after hit enter key with product/qty entry. I'm searching a BAdI for CRMD_ORDER (so many BAdIs for this TC) that can RFC by customer
-
My imac screen is flashing after startup?
I may have a problem with my imac's screen flashing around the dock right after blue screen it shows up. The dock will flash for a 1sec or 2sec and thats it. Do i need to test the memory because i did install Hynix 2 X 2GB PC3-8500S DDR3 and they whe
-
Hi All, I have been looking through my Events on iPhoto. I think I originally installed v8. Anyway, my filenames are showing the extension ie dsc_0123.jpg as the filename. However, my more recent events are not showing the file extension. Its annoyin